Provided by: ugrep_3.9.2+dfsg-1_amd64 
NAME
ugrep, ug -- file pattern searcher
SYNOPSIS
ugrep [OPTIONS] [-A NUM] [-B NUM] [-C NUM] [-y] [-Q|PATTERN] [-f FILE]
[-e PATTERN] [-N PATTERN] [-t TYPES] [-g GLOBS] [--sort[=KEY]]
[--color[=WHEN]|--colour[=WHEN]] [--pager[=COMMAND]] [FILE ...]
DESCRIPTION
The ugrep utility searches any given input files, selecting lines that match one or more
patterns. By default, a pattern matches an input line if the regular expression (RE)
matches the input line. A pattern matches multiple input lines if the RE in the pattern
matches one or more newlines in the input. An empty pattern matches every line. Each
input line that matches at least one of the patterns is written to the standard output.
The ug command is intended for interactive searching, using a .ugrep configuration file
located in the working directory or home directory, see CONFIGURATION. ug is equivalent
to ugrep --config and sorts files by name by default.
ugrep accepts input of various encoding formats and normalizes the output to UTF-8. When
a UTF byte order mark is present in the input, the input is automatically normalized;
otherwise, ugrep assumes the input is ASCII, UTF-8, or raw binary. An input encoding
format may be specified with option --encoding.
If no FILE arguments are specified and standard input is read from a terminal, recursive
searches are performed as if -r is specified. To force reading from standard input,
specify `-' as a FILE argument.
Directories specified as FILE arguments are searched without recursing deeper into
subdirectories, unless -r, -r, or -2...-9 is specified to search subdirectories.
Hidden files and directories are ignored in recursive searches. Option -. (--hidden)
includes hidden files and directories in recursive searches.
A query interface is opened with -Q (--query) to interactively specify search patterns and
view search results. Note that a PATTERN argument cannot be specified in this case. To
specify one or more patterns with -Q to start searching, use -e PATTERN.
Option -f FILE matches patterns specified in FILE. If FILE is large and defines complex
regular expression patterns, then option -P (Perl matching) may improve performance (this
omits POSIX DFA construction.)
ugrep --help WHAT displays help on options related to WHAT; --help format displays help on
--format and --replace formatting; --help regex displays help on regular expression syntax
and conventions; --help globs displays help on glob patterns to select files to search;
--help fuzzy displays help on fuzzy (approximate) searching.
The following options are available:
-A NUM, --after-context=NUM
Output NUM lines of trailing context after matching lines. Places a
--group-separator between contiguous groups of matches. If -o is specified, output
the match with context to fit NUM columns after the match or shortening the match.
See also options -B, -C and -y.
-a, --text
Process a binary file as if it were text. This is equivalent to the
--binary-files=text option. This option might output binary garbage to the
terminal, which can have problematic consequences if the terminal driver interprets
some of it as commands.
--and [-e] PATTERN ... -e PATTERN
Specify additional patterns to match. Patterns must be specified with -e. Each -e
PATTERN following this option is considered an alternative pattern to match, i.e.
each -e is interpreted as an OR pattern. For example, -e A -e B --and -e C -e D
matches lines with (`A' or `B') and (`C' or `D'). Note that multiple -e PATTERN
are alternations that bind more tightly together than --and. Option --stats
displays the search patterns applied. See also options --not, --andnot, --bool,
--files and --lines.
--andnot [-e] PATTERN
Combines --and --not. See also options --and, --not and --bool.
-B NUM, --before-context=NUM
Output NUM lines of leading context before matching lines. Places a
--group-separator between contiguous groups of matches. If -o is specified, output
the match with context to fit NUM columns before the match or shortening the match.
See also options -A, -C and -y.
-b, --byte-offset
The offset in bytes of a matched line is displayed in front of the respective
matched line. If -u is specified, displays the offset for each pattern matched on
the same line. Byte offsets are exact for ASCII, UTF-8 and raw binary input.
Otherwise, the byte offset in the UTF-8 normalized input is displayed.
--binary-files=TYPE
Controls searching and reporting pattern matches in binary files. TYPE can be
`binary', `without-match`, `text`, `hex` and `with-hex'. The default is `binary'
to search binary files and to report a match without displaying the match.
`without-match' ignores binary matches. `text' treats all binary files as text,
which might output binary garbage to the terminal, which can have problematic
consequences if the terminal driver interprets some of it as commands. `hex'
reports all matches in hexadecimal. `with-hex' only reports binary matches in
hexadecimal, leaving text matches alone. A match is considered binary when
matching a zero byte or invalid UTF. Short options are -a, -I, -U, -W and -X.
--bool, -%
Specifies Boolean query patterns. A Boolean query pattern is composed of `AND',
`OR', `NOT' operators and grouping with `(' `)'. Spacing between subpatterns is
the same as `AND', `|' is the same as `OR' and a `-' is the same as `NOT'. The
`OR' operator binds more tightly than `AND'. For example, --bool 'A|B C|D' matches
lines with (`A' or `B') and (`C' or `D'), --bool 'A -B' matches lines with `A' and
not `B'. Operators `AND', `OR', `NOT' require proper spacing. For example, --bool
'A OR B AND C OR D' matches lines with (`A' or `B') and (`C' or `D'), --bool 'A AND
NOT B' matches lines with `A' without `B'. Quoted subpatterns are matched
literally as strings. For example, --bool 'A "AND"|"OR"' matches lines with `A'
and also either `AND' or `OR'. Parenthesis are used for grouping. For example,
--bool '(A B)|C' matches lines with `A' and `B', or lines with `C'. Note that all
subpatterns in a Boolean query pattern are regular expressions, unless -F is
specified. Options -E, -F, -G, -P and -Z can be combined with --bool to match
subpatterns as strings or regular expressions (-E is the default.) This option
does not apply to -f FILE patterns. Option --stats displays the search patterns
applied. See also options --and, --andnot, --not, --files and --lines.
--break
Adds a line break between results from different files.
-C NUM, --context=NUM
Output NUM lines of leading and trailing context surrounding each matching line.
Places a --group-separator between contiguous groups of matches. If -o is
specified, output the match with context to fit NUM columns before and after the
match or shortening the match. See also options -A, -B and -y.
-c, --count
Only a count of selected lines is written to standard output. If -o or -u is
specified, counts the number of patterns matched. If -v is specified, counts the
number of non-matching lines.
--color[=WHEN], --colour[=WHEN]
Mark up the matching text with the expression stored in the GREP_COLOR or
GREP_COLORS environment variable. WHEN can be `never', `always', or `auto', where
`auto' marks up matches only when output on a terminal. The default is `auto'.
--colors=COLORS, --colours=COLORS
Use COLORS to mark up text. COLORS is a colon-separated list of one or more
parameters `sl=' (selected line), `cx=' (context line), `mt=' (matched text), `ms='
(match selected), `mc=' (match context), `fn=' (file name), `ln=' (line number),
`cn=' (column number), `bn=' (byte offset), `se=' (separator). Parameter values
are ANSI SGR color codes or `k' (black), `r' (red), `g' (green), `y' (yellow), `b'
(blue), `m' (magenta), `c' (cyan), `w' (white). Upper case specifies background
colors. A `+' qualifies a color as bright. A foreground and a background color
may be combined with font properties `n' (normal), `f' (faint), `h' (highlight),
`i' (invert), `u' (underline). Parameter `hl' enables file name hyperlinks.
Parameter `rv' reverses the `sl=' and `cx=' parameters with option -v. Selectively
overrides GREP_COLORS.
--config[=FILE], ---[FILE]
Use configuration FILE. The default FILE is `.ugrep'. The working directory is
checked first for FILE, then the home directory. The options specified in the
configuration FILE are parsed first, followed by the remaining options specified on
the command line.
--confirm
Confirm actions in -Q query mode. The default is confirm.
--cpp Output file matches in C++. See also options --format and -u.
--csv Output file matches in CSV. If -H, -n, -k, or -b is specified, additional values
are output. See also options --format and -u.
-D ACTION, --devices=ACTION
If an input file is a device, FIFO or socket, use ACTION to process it. By
default, ACTION is `skip', which means that devices are silently skipped. If
ACTION is `read', devices read just as if they were ordinary files.
-d ACTION, --directories=ACTION
If an input file is a directory, use ACTION to process it. By default, ACTION is
`skip', i.e., silently skip directories unless specified on the command line. If
ACTION is `read', warn when directories are read as input. If ACTION is `recurse',
read all files under each directory, recursively, following symbolic links only if
they are on the command line. This is equivalent to the -r option. If ACTION is
`dereference-recurse', read all files under each directory, recursively, following
symbolic links. This is equivalent to the -R option.
--depth=[MIN,][MAX], -1, -2, -3, ... -9, --10, --11, --12, ...
Restrict recursive searches from MIN to MAX directory levels deep, where -1
(--depth=1) searches the specified path without recursing into subdirectories.
Note that -3 -5, -3-5, and -35 search 3 to 5 levels deep. Enables -r if -R or -r
is not specified.
--dotall
Dot `.' in regular expressions matches anything, including newline. Note that `.*'
matches all input and should not be used.
-E, --extended-regexp
Interpret patterns as extended regular expressions (EREs). This is the default.
-e PATTERN, --regexp=PATTERN
Specify a PATTERN used during the search of the input: an input line is selected if
it matches any of the specified patterns. Note that longer patterns take
precedence over shorter patterns. This option is most useful when multiple -e
options are used to specify multiple patterns, when a pattern begins with a dash
(`-'), to specify a pattern after option -f or after the FILE arguments.
--encoding=ENCODING
The encoding format of the input. The default ENCODING is binary and UTF-8 which
are the same. Note that option -U specifies binary PATTERN matching (text matching
is the default.) ENCODING can be: `binary', `ASCII', `UTF-8', `UTF-16',
`UTF-16BE', `UTF-16LE', `UTF-32', `UTF-32BE', `UTF-32LE', `LATIN1', `ISO-8859-1',
`ISO-8859-2', `ISO-8859-3', `ISO-8859-4', `ISO-8859-5', `ISO-8859-6', `ISO-8859-7',
`ISO-8859-8', `ISO-8859-9', `ISO-8859-10', `ISO-8859-11', `ISO-8859-13',
`ISO-8859-14', `ISO-8859-15', `ISO-8859-16', `MAC', `MACROMAN', `EBCDIC', `CP437',
`CP850', `CP858', `CP1250', `CP1251', `CP1252', `CP1253', `CP1254', `CP1255',
`CP1256', `CP1257', `CP1258', `KOI8-R', `KOI8-U', `KOI8-RU'.
--exclude=GLOB
Skip files whose name matches GLOB using wildcard matching, same as -g ^GLOB. GLOB
can use **, *, ?, and [...] as wildcards and \ to quote a wildcard or backslash
character literally. When GLOB contains a `/', full pathnames are matched.
Otherwise basenames are matched. When GLOB ends with a `/', directories are
excluded as if --exclude-dir is specified. Otherwise files are excluded. Note
that --exclude patterns take priority over --include patterns. GLOB should be
quoted to prevent shell globbing. This option may be repeated.
--exclude-dir=GLOB
Exclude directories whose name matches GLOB from recursive searches, same as -g
^GLOB/. GLOB can use **, *, ?, and [...] as wildcards and \ to quote a wildcard or
backslash character literally. When GLOB contains a `/', full pathnames are
matched. Otherwise basenames are matched. Note that --exclude-dir patterns take
priority over --include-dir patterns. GLOB should be quoted to prevent shell
globbing. This option may be repeated.
--exclude-from=FILE
Read the globs from FILE and skip files and directories whose name matches one or
more globs. A glob can use **, *, ?, and [...] as wildcards and \ to quote a
wildcard or backslash character literally. When a glob contains a `/', full
pathnames are matched. Otherwise basenames are matched. When a glob ends with a
`/', directories are excluded as if --exclude-dir is specified. Otherwise files
are excluded. A glob starting with a `!' overrides previously-specified exclusions
by including matching files. Lines starting with a `#' and empty lines in FILE are
ignored. When FILE is a `-', standard input is read. This option may be repeated.
--exclude-fs=MOUNTS
Exclude file systems specified by MOUNTS from recursive searches, MOUNTS is a
comma-separated list of mount points or pathnames of directories on file systems.
Note that --exclude-fs mounts take priority over --include-fs mounts. This option
may be repeated.
-F, --fixed-strings
Interpret pattern as a set of fixed strings, separated by newlines, any of which is
to be matched. This makes ugrep behave as fgrep. If a PATTERN is specified, or -e
PATTERN or -N PATTERN, then this option has no effect on -f FILE patterns to allow
-f FILE patterns to narrow or widen the scope of the PATTERN search.
-f FILE, --file=FILE
Read newline-separated patterns from FILE. White space in patterns is significant.
Empty lines in FILE are ignored. If FILE does not exist, the GREP_PATH environment
variable is used as path to FILE. If that fails, looks for FILE in
/usr/local/share/ugrep/patterns. When FILE is a `-', standard input is read.
Empty files contain no patterns; thus nothing is matched. This option may be
repeated.
--filter=COMMANDS
Filter files through the specified COMMANDS first before searching. COMMANDS is a
comma-separated list of `exts:command [option ...]', where `exts' is a
comma-separated list of filename extensions and `command' is a filter utility. The
filter utility should read from standard input and write to standard output. Files
matching one of `exts' are filtered. When `exts' is `*', files with non-matching
extensions are filtered. One or more `option' separated by spacing may be
specified, which are passed verbatim to the command. A `%' as `option' expands
into the pathname to search. For example, --filter='pdf:pdftotext % -' searches
PDF files. The `%' expands into a `-' when searching standard input. Option
--label=.ext may be used to specify extension `ext' when searching standard input.
--filter-magic-label=[+]LABEL:MAGIC
Associate LABEL with files whose signature "magic bytes" match the MAGIC regex
pattern. Only files that have no filename extension are labeled, unless +LABEL is
specified. When LABEL matches an extension specified in --filter=COMMANDS, the
corresponding command is invoked. This option may be repeated.
--format=FORMAT
Output FORMAT-formatted matches. For example --format='%f:%n:%O%~' outputs
matching lines `%O' with filename `%f` and line number `%n' followed by a newline
`%~'. If -P is specified, FORMAT may include `%1' to `%9', `%[NUM]#' and
`%[NAME]#' to output group captures. A `%%' outputs `%'. See `ugrep --help
format' and `man ugrep' section FORMAT for details. Context options -A, -B, -C and
-y are ignored.
--free-space
Spacing (blanks and tabs) in regular expressions are ignored.
-G, --basic-regexp
Interpret patterns as basic regular expressions (BREs), i.e. make ugrep behave as
traditional grep.
-g GLOBS, --glob=GLOBS
Search only files whose name matches the specified comma-separated list of GLOBS,
same as --include='glob' for each `glob' in GLOBS. When a `glob' is preceded by a
`!' or a `^', skip files whose name matches `glob', same as --exclude='glob'. When
`glob' contains a `/', full pathnames are matched. Otherwise basenames are
matched. When `glob' ends with a `/', directories are matched, same as
--include-dir='glob' and --exclude-dir='glob'. A leading `/' matches the working
directory. This option may be repeated and may be combined with options -M, -O and
-t to expand searches. See `ugrep --help globs' and `man ugrep' section GLOBBING
for details.
--group-separator[=SEP]
Use SEP as a group separator for context options -A, -B and -C. The default is a
double hyphen (`--').
-H, --with-filename
Always print the filename with output lines. This is the default when there is
more than one file to search.
-h, --no-filename
Never print filenames with output lines. This is the default when there is only
one file (or only standard input) to search.
--heading, -+
Group matches per file. Adds a heading and a line break between results from
different files.
--help [WHAT], -? [WHAT]
Display a help message, specifically on WHAT when specified. In addition, `--help
format' displays an overview of FORMAT fields, `--help regex' displays an overview
of regular expressions and `--help globs' displays an overview of glob syntax and
conventions.
--hexdump=[1-8][a][bch][A[NUM]][B[NUM]][C[NUM]]
Output matches in 1 to 8 columns of 8 hexadecimal octets. The default is 2 columns
or 16 octets per line. Option `a' outputs a `*' for all hex lines that are
identical to the previous hex line, `b' removes all space breaks, `c' removes the
character column, `h' removes hex spacing, `A' includes up to NUM hex lines after
the match, `B' includes up to NUM hex lines before the match and `C' includes up to
NUM hex lines. When NUM is omitted, the matching line is included in the output.
See also options -U, -W and -X.
--hidden, -.
Search hidden files and directories.
--hyperlink
Hyperlinks are enabled for file names when colors are enabled. Same as
--colors=hl.
-I, --ignore-binary
Ignore matches in binary files. This option is equivalent to the
--binary-files=without-match option.
-i, --ignore-case
Perform case insensitive matching. By default, ugrep is case sensitive. By
default, this option applies to ASCII letters only. Use options -P and -i for
Unicode case insensitive matching.
--ignore-files[=FILE]
Ignore files and directories matching the globs in each FILE that is encountered in
recursive searches. The default FILE is `.gitignore'. Matching files and
directories located in the directory of a FILE's location and in directories below
are ignored by temporarily extending the --exclude and --exclude-dir globs, as if
--exclude-from=FILE is locally enforced. Globbing syntax is the same as the
--exclude-from=FILE gitignore syntax; directories are excluded when the glob ends
in a `/', same as git. Files and directories explicitly specified as command line
arguments are never ignored. This option may be repeated with additional files.
--include=GLOB
Search only files whose name matches GLOB using wildcard matching, same as -g GLOB.
GLOB can use **, *, ?, and [...] as wildcards and \ to quote a wildcard or
backslash character literally. When GLOB contains a `/', full pathnames are
matched. Otherwise basenames are matched. When GLOB ends with a `/', directories
are included as if --include-dir is specified. Otherwise files are included. Note
that --exclude patterns take priority over --include patterns. GLOB should be
quoted to prevent shell globbing. This option may be repeated.
--include-dir=GLOB
Only directories whose name matches GLOB are included in recursive searches, same
as -g GLOB/. GLOB can use **, *, ?, and [...] as wildcards and \ to quote a
wildcard or backslash character literally. When GLOB contains a `/', full
pathnames are matched. Otherwise basenames are matched. Note that --exclude-dir
patterns take priority over --include-dir patterns. GLOB should be quoted to
prevent shell globbing. This option may be repeated.
--include-from=FILE
Read the globs from FILE and search only files and directories whose name matches
one or more globs. A glob can use **, *, ?, and [...] as wildcards and \ to quote
a wildcard or backslash character literally. When a glob contains a `/', full
pathnames are matched. Otherwise basenames are matched. When a glob ends with a
`/', directories are included as if --include-dir is specified. Otherwise files
are included. A glob starting with a `!' overrides previously-specified inclusions
by excluding matching files. Lines starting with a `#' and empty lines in FILE are
ignored. When FILE is a `-', standard input is read. This option may be repeated.
--include-fs=MOUNTS
Only file systems specified by MOUNTS are included in recursive searches. MOUNTS
is a comma-separated list of mount points or pathnames of directories on file
systems. --include-fs=. restricts recursive searches to the file system of the
working directory only. Note that --exclude-fs mounts take priority over
--include-fs mounts. This option may be repeated.
-J NUM, --jobs=NUM
Specifies the number of threads spawned to search files. By default an optimum
number of threads is spawned to search files simultaneously. -J1 disables
threading: files are searched in the same order as specified.
-j, --smart-case
Perform case insensitive matching like option -i, unless a pattern is specified
with a literal ASCII upper case letter.
--json Output file matches in JSON. If -H, -n, -k, or -b is specified, additional values
are output. See also options --format and -u.
-K [MIN,][MAX], --range=[MIN,][MAX], --min-line=MIN, --max-line=MAX
Start searching at line MIN, stop at line MAX when specified.
-k, --column-number
The column number of a matched pattern is displayed in front of the respective
matched line, starting at column 1. Tabs are expanded when columns are counted,
see also option --tabs.
-L, --files-without-match
Only the names of files not containing selected lines are written to standard
output. Pathnames are listed once per file searched. If the standard input is
searched, the string ``(standard input)'' is written.
-l, --files-with-matches
Only the names of files containing selected lines are written to standard output.
ugrep will only search a file until a match has been found, making searches
potentially less expensive. Pathnames are listed once per file searched. If the
standard input is searched, the string ``(standard input)'' is written.
--label=LABEL
Displays the LABEL value when input is read from standard input where a file name
would normally be printed in the output. Associates a filename extension with
standard input when LABEL has a suffix. The default value is `(standard input)'.
--line-buffered
Force output to be line buffered instead of block buffered.
--lines
Apply Boolean queries to match lines, the opposite of --files. This is the default
Boolean query mode to match specific lines.
-M MAGIC, --file-magic=MAGIC
Only files matching the signature pattern MAGIC are searched. The signature "magic
bytes" at the start of a file are compared to the MAGIC regex pattern. When
matching, the file will be searched. When MAGIC is preceded by a `!' or a `^',
skip files with matching MAGIC signatures. This option may be repeated and may be
combined with options -O and -t to expand the search. Every file on the search
path is read, making searches potentially more expensive.
-m [MIN,][MAX], --min-count=MIN, --max-count=MAX
Require MIN matches, stop after MAX matches when specified. Output MIN to MAX
matches. For example, -m1 outputs the first match and -cm1, (with a comma) counts
non-zero matches. See also option -K.
--match
Match all input. Same as specifying an empty pattern to search.
--max-files=NUM
Restrict the number of files matched to NUM. Note that --sort or -J1 may be
specified to produce replicable results. If --sort is specified, the number of
threads spawned is limited to NUM.
--mmap[=MAX]
Use memory maps to search files. By default, memory maps are used under certain
conditions to improve performance. When MAX is specified, use up to MAX mmap
memory per thread.
-N PATTERN, --neg-regexp=PATTERN
Specify a negative PATTERN used during the search of the input: an input line is
selected only if it matches the specified patterns unless it matches the negative
PATTERN. Same as -e (?^PATTERN). Negative pattern matches are essentially removed
before any other patterns are matched. Note that longer patterns take precedence
over shorter patterns. This option may be repeated.
-n, --line-number
Each output line is preceded by its relative line number in the file, starting at
line 1. The line number counter is reset for each file processed.
--no-group-separator
Removes the group separator line from the output for context options -A, -B and -C.
--not [-e] PATTERN
Specifies that PATTERN should not match. Note that -e A --not -e B matches lines
with `A' or lines without a `B'. To match lines with `A' that have no `B', specify
-e A --andnot -e B. Option --stats displays the search patterns applied. See also
options --and, --andnot, --bool, --files and --lines.
-O EXTENSIONS, --file-extension=EXTENSIONS
Search only files whose filename extensions match the specified comma-separated
list of EXTENSIONS, same as --include='*.ext' for each `ext' in EXTENSIONS. When
an `ext' is preceded by a `!' or a `^', skip files whose filename extensions
matches `ext', same as --exclude='*.ext'. This option may be repeated and may be
combined with options -g, -M and -t to expand the recursive search.
-o, --only-matching
Output only the matching part of lines. If -b, -k or -u is specified, output each
match on a separate line. When multiple lines match a pattern, output the matching
lines with `|' as the field separator. If -A, -B or -C is specified, fits the
match and its context on a line within the specified number of columns.
--only-line-number
The line number of the matching line in the file is output without displaying the
match. The line number counter is reset for each file processed.
--files
Apply Boolean queries to match files, the opposite of --lines. A file matches if
all Boolean conditions are satisfied by the lines matched in the file. For
example, --files -e A --and -e B -e C --andnot -e D matches a file if some lines
match `A' and some lines match (`B' or `C') and no line in the file matches `D'.
May also be specified as --files --bool 'A B|C -D'. Option -v cannot be specified
with --files. See also options --and, --andnot, --not, --bool and --lines.
-P, --perl-regexp
Interpret PATTERN as a Perl regular expression using PCRE2. Note that Perl pattern
matching differs from the default grep POSIX pattern matching.
-p, --no-dereference
If -R or -r is specified, no symbolic links are followed, even when they are
specified on the command line.
--pager[=COMMAND]
When output is sent to the terminal, uses COMMAND to page through the output. The
default COMMAND is `less -R'. Enables --heading and --line-buffered.
--pretty
When output is sent to a terminal, enables --color, --heading, -n, --sort and -T
when not explicitly disabled.
-Q[DELAY], --query[=DELAY]
Query mode: user interface to perform interactive searches. This mode requires an
ANSI capable terminal. An optional DELAY argument may be specified to reduce or
increase the response time to execute searches after the last key press, in
increments of 100ms, where the default is 5 (0.5s delay). No whitespace may be
given between -Q and its argument DELAY. Initial patterns may be specified with -e
PATTERN, i.e. a PATTERN argument requires option -e. Press F1 or CTRL-Z to view
the help screen. Press F2 or CTRL-Y to invoke a command to view or edit the file
shown at the top of the screen. The command can be specified with option --view,
or defaults to environment variable PAGER if defined, or EDITOR. Press Tab and
Shift-Tab to navigate directories and to select a file to search. Press Enter to
select lines to output. Press ALT-l for option -l to list files, ALT-n for -n,
etc. Non-option commands include ALT-] to increase fuzziness and ALT-} to increase
context. Enables --heading. See also options --confirm and --view.
-q, --quiet, --silent
Quiet mode: suppress all output. ugrep will only search until a match has been
found.
-R, --dereference-recursive
Recursively read all files under each directory. Follow all symbolic links, unlike
-r. See also option --sort.
-r, --recursive
Recursively read all files under each directory, following symbolic links only if
they are specified on the command line. Note that when no FILE arguments are
specified and input is read from a terminal, recursive searches are performed as if
-r is specified. See also option --sort.
--replace=FORMAT
Replace matching patterns in the output by the specified FORMAT with `%' fields.
If -P is specified, FORMAT may include `%1' to `%9', `%[NUM]#' and `%[NAME]#' to
output group captures. A `%%' outputs `%' and `%~' outputs a newline. See option
--format, `ugrep --help format' and `man ugrep' section FORMAT for details.
-S, --dereference
If -r is specified, all symbolic links are followed, like -R. The default is not
to follow symbolic links to directories.
-s, --no-messages
Silent mode: nonexistent and unreadable files are ignored, i.e. their error
messages and warnings are suppressed.
--save-config[=FILE]
Save configuration FILE. By default `.ugrep' is saved. If FILE is a `-', write
the configuration to standard output.
--separator[=SEP]
Use SEP as field separator between file name, line number, column number, byte
offset and the matched line. The default is a colon (`:').
--sort[=KEY]
Displays matching files in the order specified by KEY in recursive searches.
Normally the ug command sorts by name whereas the ugrep batch command displays
matches in no particular order to improve performance. The sort KEY can be `name'
to sort by pathname (default), `best' to sort by best match with option -Z (sort by
best match requires two passes over files, which is expensive), `size' to sort by
file size, `used' to sort by last access time, `changed' to sort by last
modification time and `created' to sort by creation time. Sorting is reversed with
`rname', `rbest', `rsize', `rused', `rchanged', or `rcreated'. Archive contents
are not sorted. Subdirectories are sorted and displayed after matching files.
FILE arguments are searched in the same order as specified.
--stats
Output statistics on the number of files and directories searched and the inclusion
and exclusion constraints applied.
-T, --initial-tab
Add a tab space to separate the file name, line number, column number and byte
offset with the matched line.
-t TYPES, --file-type=TYPES
Search only files associated with TYPES, a comma-separated list of file types.
Each file type corresponds to a set of filename extensions passed to option -O and
filenames passed to option -g. For capitalized file types, the search is expanded
to include files with matching file signature magic bytes, as if passed to option
-M. When a type is preceded by a `!' or a `^', excludes files of the specified
type. This option may be repeated. The possible file types can be (where -tlist
displays a detailed list): `actionscript', `ada', `asm', `asp', `aspx', `autoconf',
`automake', `awk', `Awk', `basic', `batch', `bison', `c', `c++', `clojure', `cpp',
`csharp', `css', `csv', `dart', `Dart', `delphi', `elisp', `elixir', `erlang',
`fortran', `gif', `Gif', `go', `groovy', `gsp', `haskell', `html', `jade', `java',
`jpeg', `Jpeg', `js', `json', `jsp', `julia', `kotlin', `less', `lex', `lisp',
`lua', `m4', `make', `markdown', `matlab', `node', `Node', `objc', `objc++',
`ocaml', `parrot', `pascal', `pdf', `Pdf', `perl', `Perl', `php', `Php', `png',
`Png', `prolog', `python', `Python', `r', `rpm', `Rpm', `rst', `rtf', `Rtf',
`ruby', `Ruby', `rust', `scala', `scheme', `shell', `Shell', `smalltalk', `sql',
`svg', `swift', `tcl', `tex', `text', `tiff', `Tiff', `tt', `typescript',
`verilog', `vhdl', `vim', `xml', `Xml', `yacc', `yaml'.
--tabs[=NUM]
Set the tab size to NUM to expand tabs for option -k. The value of NUM may be 1,
2, 4, or 8. The default tab size is 8.
--tag[=TAG[,END]]
Disables colors to mark up matches with TAG. END marks the end of a match if
specified, otherwise TAG. The default is `___'.
-U, --binary
Disables Unicode matching for binary file matching, forcing PATTERN to match bytes,
not Unicode characters. For example, -U '\xa3' matches byte A3 (hex) instead of
the Unicode code point U+00A3 represented by the UTF-8 sequence C2 A3. See also
option --dotall.
-u, --ungroup
Do not group multiple pattern matches on the same matched line. Output the matched
line again for each additional pattern match, using `+' as a separator.
-V, --version
Display version with linked libraries and exit.
-v, --invert-match
Selected lines are those not matching any of the specified patterns.
--view[=COMMAND]
Use COMMAND to view/edit a file in query mode when pressing CTRL-Y.
-W, --with-hex
Output binary matches in hexadecimal, leaving text matches alone. This option is
equivalent to the --binary-files=with-hex option with --hexdump=2C. To omit the
matching line from the hex output, combine option --hexdump with option -W. See
also option -U.
-w, --word-regexp
The PATTERN is searched for as a word, such that the matching text is preceded by a
non-word character and is followed by a non-word character. Word characters are
letters, digits and the underscore. With option -P, word characters are Unicode
letters, digits and underscore. This option has no effect if -x is also specified.
If a PATTERN is specified, or -e PATTERN or -N PATTERN, then this option has no
effect on -f FILE patterns to allow -f FILE patterns to narrow or widen the scope
of the PATTERN search.
--width[=NUM]
Truncate the output to NUM visible characters per line. The width of the terminal
window is used if NUM is not specified. Note that double wide characters in the
input may result in wider lines.
-X, --hex
Output matches in hexadecimal. This option is equivalent to the --binary-files=hex
option with --hexdump=2C. To omit the matching line from the hex output, use
option --hexdump instead of -X. See also option -U.
-x, --line-regexp
Select only those matches that exactly match the whole line, as if the patterns are
surrounded by ^ and $. If a PATTERN is specified, or -e PATTERN or -N PATTERN,
then this option has no effect on -f FILE patterns to allow -f FILE patterns to
narrow or widen the scope of the PATTERN search.
--xml Output file matches in XML. If -H, -n, -k, or -b is specified, additional values
are output. See also options --format and -u.
-Y, --empty
Permits empty matches. By default, empty matches are disabled, unless a pattern
begins with `^' or ends with `$'. With this option, empty-matching patterns such
as x? and x*, match all input, not only lines containing the character `x'.
-y, --any-line, --passthru
Any line is output (passthru). Non-matching lines are output as context with a `-'
separator. See also options -A, -B and -C.
-Z[best][+-~][MAX], --fuzzy=[best][+-~][MAX]
Fuzzy mode: report approximate pattern matches within MAX errors. The default is
-Z1: one deletion, insertion or substitution is allowed. If `+`, `-' and/or `~' is
specified, then `+' allows insertions, `-' allows deletions and `~' allows
substitutions. For example, -Z+~3 allows up to three insertions or substitutions,
but no deletions. If `best' is specified, then only the best matching lines are
output with the lowest cost per file. Option -Zbest requires two passes over a
file and cannot be used with standard input or Boolean queries. Option --sort=best
orders matching files by best match. The first character of an approximate match
always matches a character at the beginning of the pattern. To fuzzy match the
first character, replace it with a `.' or `.?'. Option -U applies fuzzy matching
to ASCII and bytes instead of Unicode text. No whitespace may be given between -Z
and its argument.
-z, --decompress
Decompress files to search, when compressed. Archives (.cpio, .pax, .tar and .zip)
and compressed archives (e.g. .taz, .tgz, .tpz, .tbz, .tbz2, .tb2, .tz2, .tlz,
.txz, .tzst) are searched and matching pathnames of files in archives are output in
braces. If -g, -O, -M, or -t is specified, searches files stored in archives whose
filenames match globs, match filename extensions, match file signature magic bytes,
or match file types, respectively. Supported compression formats: gzip (.gz),
compress (.Z), zip, bzip2 (requires suffix .bz, .bz2, .bzip2, .tbz, .tbz2, .tb2,
.tz2), lzma and xz (requires suffix .lzma, .tlz, .xz, .txz), lz4 (requires suffix
.lz4), zstd (requires suffix .zst, .zstd, .tzst).
--zmax=NUM
When used with option -z (--decompress), searches the contents of compressed files
and archives stored within archives by up to NUM recursive expansions. The default
--zmax=1 only permits searching uncompressed files stored in cpio, pax, tar and zip
archives; compressed files and archives are detected as binary files and are
effectively ignored. Specify --zmax=2 to search compressed files and archives
stored in cpio, pax, tar and zip archives. NUM may range from 1 to 99 for up to 99
decompression and de-archiving steps. Increasing NUM values gradually degrades
performance.
-0, --null
Output a zero-byte (NUL) after the file name. This option can be used with
commands such as `find -print0' and `xargs -0' to process arbitrary file names.
A `--' signals the end of options; the rest of the parameters are FILE arguments, allowing
filenames to begin with a `-' character.
Long options may start with `--no-' to disable, when applicable.
The regular expression pattern syntax is an extended form of the POSIX ERE syntax. For an
overview of the syntax see README.md or visit:
https://github.com/Genivia/ugrep
Note that `.' matches any non-newline character. Pattern `\n' matches a newline
character. Multiple lines may be matched with patterns that match one or more newline
characters.
EXIT STATUS
The ugrep utility exits with one of the following values:
0 One or more lines were selected.
1 No lines were selected.
>1 An error occurred.
If -q or --quiet or --silent is used and a line is selected, the exit status is 0 even if
an error occurred.
CONFIGURATION
The ug command is intended for context-dependent interactive searching and is equivalent
to the ugrep --config command to load the default configuration file `.ugrep' when present
in the working directory or in the home directory.
A configuration file contains `NAME=VALUE' pairs per line, where `NAME` is the name of a
long option (without `--') and `=VALUE' is an argument, which is optional and may be
omitted depending on the option. Empty lines and lines starting with a `#' are ignored.
The --config=FILE option and its abbreviated form ---FILE load the specified configuration
file located in the working directory or, when not found, located in the home directory.
An error is produced when FILE is not found or cannot be read.
Command line options are parsed in the following order: the configuration file is loaded
first, followed by the remaining options and arguments on the command line.
The --save-config option saves a `.ugrep' configuration file to the working directory with
a subset of the current options. The --save-config=FILE option saves the configuration to
FILE. The configuration is written to standard output when FILE is a `-'.
GLOBBING
Globbing is used by options -g, --include, --include-dir, --include-from, --exclude,
--exclude-dir, --exclude-from and --ignore-files to match pathnames and basenames in
recursive searches. Glob arguments for these options should be quoted to prevent shell
globbing.
Globbing supports gitignore syntax and the corresponding matching rules, except that a
glob normally matches files but not directories. If a glob ends in a path separator `/',
then it matches directories but not files, as if --include-dir or --exclude-dir is
specified. When a glob contains a path separator `/', the full pathname is matched.
Otherwise the basename of a file or directory is matched. For example, *.h matches foo.h
and bar/foo.h. bar/*.h matches bar/foo.h but not foo.h and not bar/bar/foo.h. Use a
leading `/' to force /*.h to match foo.h but not bar/foo.h.
When a glob starts with a `^' or a `!' as in -g^GLOB, the match is negated. Likewise, a
`!' (but not a `^') may be used with globs in the files specified --include-from,
--exclude-from, and --ignore-files to negate the glob match. Empty lines or lines
starting with a `#' are ignored.
Glob Syntax and Conventions
* Matches anything except /.
? Matches any one character except /.
[abc-e]
Matches one character a,b,c,d,e.
[^abc-e]
Matches one character not a,b,c,d,e,/.
[!abc-e]
Matches one character not a,b,c,d,e,/.
/ When used at the start of a glob, matches if pathname has no /. When used at the
end of a glob, matches directories only.
**/ Matches zero or more directories.
/** When used at the end of a glob, matches everything after the /.
\? Matches a ? or any other character specified after the backslash.
Glob Matching Examples
* Matches a, b, x/a, x/y/b
a Matches a, x/a, x/y/a, but not b, x/b, a/a/b
/* Matches a, b, but not x/a, x/b, x/y/a
/a Matches a, but not x/a, x/y/a
a?b Matches axb, ayb, but not a, b, ab, a/b
a[xy]b Matches axb, ayb but not a, b, azb
a[a-z]b
Matches aab, abb, acb, azb, but not a, b, a3b, aAb, aZb
a[^xy]b
Matches aab, abb, acb, azb, but not a, b, axb, ayb
a[^a-z]b
Matches a3b, aAb, aZb but not a, b, aab, abb, acb, azb
a/*/b Matches a/x/b, a/y/b, but not a/b, a/x/y/b
**/a Matches a, x/a, x/y/a, but not b, x/b.
a/**/b Matches a/b, a/x/b, a/x/y/b, but not x/a/b, a/b/x
a/** Matches a/x, a/y, a/x/y, but not a, b/x
a\?b Matches a?b, but not a, b, ab, axb, a/b
Note that exclude glob patterns take priority over include glob patterns when specified
with options -g, --exclude, --exclude-dir, --include and include-dir.
Glob patterns specified with prefix `!' in any of the files associated with --include-
from, --exclude-from and --ignore-files will negate a previous glob match. That is, any
matching file or directory excluded by a previous glob pattern specified in the files
associated with --exclude-from or --ignore-file will become included again. Likewise, any
matching file or directory included by a previous glob pattern specified in the files
associated with --include-from will become excluded again.
ENVIRONMENT
GREP_PATH
May be used to specify a file path to pattern files. The file path is used by
option -f to open a pattern file, when the pattern file does not exist.
GREP_COLOR
May be used to specify ANSI SGR parameters to highlight matches when option --color
is used, e.g. 1;35;40 shows pattern matches in bold magenta text on a black
background. Deprecated in favor of GREP_COLORS, but still supported.
GREP_COLORS
May be used to specify ANSI SGR parameters to highlight matches and other
attributes when option --color is used. Its value is a colon-separated list of
ANSI SGR parameters that defaults to
cx=33:mt=1;31:fn=1;35:ln=1;32:cn=1;32:bn=1;32:se=36. The mt=, ms=, and mc=
capabilities of GREP_COLORS take priority over GREP_COLOR. Option --colors takes
priority over GREP_COLORS.
GREP_COLORS
Colors are specified as string of colon-separated ANSI SGR parameters of the form
`what=substring', where `substring' is a semicolon-separated list of ANSI SGR codes or `k'
(black), `r' (red), `g' (green), `y' (yellow), `b' (blue), `m' (magenta), `c' (cyan), `w'
(white). Upper case specifies background colors. A `+' qualifies a color as bright. A
foreground and a background color may be combined with one or more font properties `n'
(normal), `f' (faint), `h' (highlight), `i' (invert), `u' (underline). Substrings may be
specified for:
sl= SGR substring for selected lines.
cx= SGR substring for context lines.
rv Swaps the sl= and cx= capabilities when -v is specified.
mt= SGR substring for matching text in any matching line.
ms= SGR substring for matching text in a selected line. The substring mt= by default.
mc= SGR substring for matching text in a context line. The substring mt= by default.
fn= SGR substring for filenames.
ln= SGR substring for line numbers.
cn= SGR substring for column numbers.
bn= SGR substring for byte offsets.
se= SGR substring for separators.
rv a Boolean parameter, switches sl= and cx= with option -v.
hl a Boolean parameter, enables filename hyperlinks (\33]8;;link).
ne a Boolean parameter, disables ``erase in line'' \33[K.
FORMAT
Option --format=FORMAT specifies an output format for file matches. Fields may be used in
FORMAT, which expand into the following values:
%[ARG]F
if option -H is used: ARG, the file pathname and separator.
%f the file pathname.
%a the file basename without directory path.
%p the directory path to the file.
%z the file pathname in a (compressed) archive.
%[ARG]H
if option -H is used: ARG, the quoted pathname and separator, \" and \\ replace "
and \.
%h the quoted file pathname, \" and \\ replace " and \.
%[ARG]N
if option -n is used: ARG, the line number and separator.
%n the line number of the match.
%[ARG]K
if option -k is used: ARG, the column number and separator.
%k the column number of the match.
%[ARG]B
if option -b is used: ARG, the byte offset and separator.
%b the byte offset of the match.
%[ARG]T
if option -T is used: ARG and a tab character.
%t a tab character.
%[SEP]$
set field separator to SEP for the rest of the format fields.
%[ARG]<
if the first match: ARG.
%[ARG]>
if not the first match: ARG.
%, if not the first match: a comma, same as %[,]>.
%: if not the first match: a colon, same as %[:]>.
%; if not the first match: a semicolon, same as %[;]>.
%| if not the first match: a vertical bar, same as %[|]>.
%[ARG]S
if not the first match: ARG and separator, see also %[SEP]$.
%s the separator, see also %[ARG]S and %[SEP]$.
%~ a newline character.
%m the number of matches or matched files.
%O the matching line is output as a raw string of bytes.
%o the match is output as a raw string of bytes.
%Q the matching line as a quoted string, \" and \\ replace " and \.
%q the match as a quoted string, \" and \\ replace " and \.
%C the matching line formatted as a quoted C/C++ string.
%c the match formatted as a quoted C/C++ string.
%J the matching line formatted as a quoted JSON string.
%j the match formatted as a quoted JSON string.
%V the matching line formatted as a quoted CSV string.
%v the match formatted as a quoted CSV string.
%X the matching line formatted as XML character data.
%x the match formatted as XML character data.
%w the width of the match, counting wide characters.
%d the size of the match, counting bytes.
%e the ending byte offset of the match.
%Z the edit distance cost of an approximate match with option -Z
%u select unique lines only, unless option -u is used.
%1 the first regex group capture of the match, and so on up to group %9, same as
%[1]#; requires option -P.
%[NUM]#
the regex group capture NUM; requires option -P.
%[NUM]b
the byte offset of the group capture NUM; requires option -P. Use e for the ending
byte offset and d for the byte length.
%[NUM1|NUM2|...]#
the first group capture NUM that matched; requires option -P.
%[NUM1|NUM2|...]b
the byte offset of the first group capture NUM that matched; requires option -P.
Use e for the ending byte offset and d for the byte length.
%[NAME]#
the NAMEd group capture; requires option -P and capturing pattern
`(?<NAME>PATTERN)', see also %G.
%[NAME]b
the byte offset of the NAMEd group capture; requires option -P and capturing
pattern `(?<NAME>PATTERN)'. Use e for the ending byte offset and d for the byte
length.
%[NAME1|NAME2|...]#
the first NAMEd group capture that matched; requires option -P and capturing
pattern `(?<NAME>PATTERN)', see also %G.
%[NAME1|NAME2|...]b
the byte offset of the first NAMEd group capture that matched; requires option -P
and capturing pattern `(?<NAME>PATTERN)'. Use e for the ending byte offset and d
for the byte length.
%G list of group capture indices/names that matched; requires option -P.
%[TEXT1|TEXT2|...]G
list of TEXT indexed by group capture indices that matched; requires option -P.
%g the group capture index/name matched or 1; requires option -P.
%[TEXT1|TEXT2|...]g
the first TEXT indexed by the first group capture index that matched; requires
option -P.
%% the percentage sign.
Formatted output is written without a terminating newline, unless %~ or `\n' is explicitly
specified in the format string.
The [ARG] part of a field is optional and may be omitted. When present, the argument must
be placed in [] brackets, for example %[,]F to output a comma, the pathname, and a
separator.
%[SEP]$ and %u are switches and do not send anything to the output.
The separator used by the %F, %H, %N, %K, %B, %S and %G fields may be changed by preceding
the field by %[SEP]$. When [SEP] is not provided, this reverts the separator to the
default separator or the separator specified with --separator.
Formatted output is written for each matching pattern, which means that a line may be
output multiple times when patterns match more than once on the same line. If field %u is
specified anywhere in a format string, matching lines are output only once, unless option
-u, --ungroup is specified or when more than one line of input matched the search pattern.
Additional formatting options:
--format-begin=FORMAT
the FORMAT when beginning the search.
--format-open=FORMAT
the FORMAT when opening a file and a match was found.
--format-close=FORMAT
the FORMAT when closing a file and a match was found.
--format-end=FORMAT
the FORMAT when ending the search.
The context options -A, -B, -C, -y, and display options --break, --heading, --color, -T,
and --null have no effect on formatted output.
EXAMPLES
Display lines containing the word `patricia' in `myfile.txt':
$ ugrep -w patricia myfile.txt
Display lines containing the word `patricia', ignoring case:
$ ugrep -wi patricia myfile.txt
Display lines approximately matching the word `patricia', ignoring case and allowing up to
2 spelling errors using fuzzy search:
$ ugrep -Z2 -wi patricia myfile.txt
Count the number of lines containing `patricia', ignoring case:
$ ugrep -cwi patricia myfile.txt
Count the number of words `patricia', ignoring case:
$ ugrep -cowi patricia myfile.txt
List lines with `amount' and a decimal, ignoring case (space is AND):
$ ugrep -i --bool 'amount +(.+)?' myfile.txt
Alternative query:
$ ugrep -wi -e amount --and '+(.+)?' myfile.txt
List all Unicode words in a file:
$ ugrep -o '\w+' myfile.txt
List all ASCII words in a file:
$ ugrep -o '[[:word:]]+' myfile.txt
List the laughing face emojis (Unicode code points U+1F600 to U+1F60F):
$ ugrep -o '[\x{1F600}-\x{1F60F}]' myfile.txt
Check if a file contains any non-ASCII (i.e. Unicode) characters:
$ ugrep -q '[^[:ascii:]]' myfile.txt && echo "contains Unicode"
Display the line and column number of `FIXME' in C++ files using recursive search, with
one line of context before and after a matched line:
$ ugrep -C1 -R -n -k -tc++ FIXME
Display the line and column number of `FIXME' in long Javascript files using recursive
search, showing only matches with up to 10 characters of context before and after:
$ ugrep -o -C20 -R -n -k -tjs FIXME
List the C/C++ comments in a file with line numbers:
$ ugrep -n -e '//.*' -e '/\*([^*]|(\*+[^*/]))*\*+\/' myfile.cpp
The same, but using predefined pattern c++/comments:
$ ugrep -n -f c++/comments myfile.cpp
List the lines that need fixing in a C/C++ source file by looking for the word `FIXME'
while skipping any `FIXME' in quoted strings:
$ ugrep -e FIXME -N '"(\\.|\\\r?\n|[^\\\n"])*"' myfile.cpp
The same, but using predefined pattern cpp/zap_strings:
$ ugrep -e FIXME -f cpp/zap_strings myfile.cpp
Find lines with `FIXME' or `TODO', showing line numberes:
$ ugrep -n -e FIXME -e TODO myfile.cpp
Find lines with `FIXME' that also contain `urgent':
$ ugrep -n -e FIXME --and urgent myfile.cpp
The same, but with a Boolean query pattern (a space is AND):
$ ugrep -n --bool 'FIXME urgent' myfile.cpp
Find lines with `FIXME' that do not also contain `later':
$ ugrep -n -e FIXME --andnot later myfile.cpp
The same, but with a Boolean query pattern (a space is AND, - is NOT):
$ ugrep -n --bool 'FIXME -later' myfile.cpp
Output a list of line numbers of lines with `FIXME' but not `later':
$ ugrep -e FIXME --andnot later --format='%,%n' myfile.cpp
Recursively list all files with both `FIXME' and `LICENSE' anywhere in the file, not
necessarily on the same line:
$ ugrep -l --files --bool 'FIXME LICENSE'
Find lines with `FIXME' in the C/C++ files stored in a tarball:
$ ugrep -z -tc++ -n FIXME project.tgz
Recursively find lines with `FIXME' in C/C++ files, but do not search any `bak' and `old'
directories:
$ ugrep -n FIXME -tc++ -g^bak/,^old/
Recursively search for the word `copyright' in cpio/jar/pax/tar/zip archives, compressed
and regular files, and in PDFs using a PDF filter:
$ ugrep -z -w --filter='pdf:pdftotext % -' copyright
Match the binary pattern `A3hhhhA3' (hex) in a binary file without Unicode pattern
matching -U (which would otherwise match `\xaf' as a Unicode character U+00A3 with UTF-8
byte sequence C2 A3) and display the results in hex with --hexdump with C1 to output one
hex line before and after each match:
$ ugrep -U --hexdump=C1 '\xa3[\x00-\xff]{2}\xa3' a.out
Hexdump an entire file using a pager for viewing:
$ ugrep -X --pager '' a.out
List all files that are not ignored by one or more `.gitignore':
$ ugrep -l '' --ignore-files
List all files containing a RPM signature, located in the `rpm' directory and recursively
below up to two levels deeper (3 levels total):
$ ugrep -3 -l -tRpm '' rpm/
Monitor the system log for bug reports and ungroup multiple matches on a line:
$ tail -f /var/log/system.log | ugrep -u -i -w bug
Interactive fuzzy search with Boolean search queries:
$ ugrep -Q --bool -Z3 --sort=best
Display all words in a MacRoman-encoded file that has CR newlines:
$ ugrep --encoding=MACROMAN '\w+' mac.txt
Display options related to "fuzzy" searching:
$ ugrep --help fuzzy
BUGS
Report bugs at:
https://github.com/Genivia/ugrep/issues
LICENSE
ugrep is released under the BSD-3 license. All parts of the software have reasonable
copyright terms permitting free redistribution. This includes the ability to reuse all or
parts of the ugrep source tree.
SEE ALSO
grep(1).