NAME

       uxplay - start AirPlay server

SYNOPSIS

       uxplay [-n name] [-s wxh] [-p [n]] [more  OPTIONS  ...]

DESCRIPTION

       UxPlay 1.56: An open-source AirPlay mirroring server based on RPiPlay

OPTIONS

       -n name   Specify the network name of the AirPlay server

       -nh       Do NOT append "@hostname" at end of the AirPlay server name

       -s wxh[@r]Set display resolution [refresh_rate] default 1920x1080[@60]

       -o        Set display "overscanned" mode on (not usually needed)

       -fs       Full-screen (only with Wayland and VAAPI plugins)

       -p        Use legacy ports UDP 6000:6001:7011 TCP 7000:7001:7100

       -p n      Use TCP and UDP ports n,n+1,n+2. range 1024-65535

                 use "-p n1,n2,n3" to set each port, "n1,n2" for n3 = n2+1

                 "-p tcp n" or "-p udp n" sets TCP or UDP ports separately.

       -avdec    Force software h264 video decoding with libav decoder.

       -vp prs   Choose GStreamer h264 parser; default "h264parse"

       -vd dec   Choose GStreamer h264 decoder; default "decodebin"

                 choices: (software) avdec_h264; (hardware) v4l2h264dec,

                 nvdec, nvh264dec, vaapih264dec, vtdec, ...

       -vc cnv   Choose GStreamer videoconverter; default "videoconvert"

                 another choice when using v4l2h264dec: v4l2convert.

       -vs sink  Choose the GStreamer videosink; default "autovideosink"

                 choices: ximagesink,xvimagesink,vaapisink,glimagesink,

                 gtksink,waylandsink,osximagesink,kmssink,fpsdisplaysink,...

       -vs 0     Streamed audio only, with no video display window.

       -v4l2     Use Video4Linux2 for GPU hardware h264 video decoding.

       -bt709    A workaround (bt709 color) that may be needed with -rpi.

       -rpi      Same as "-v4l2" (for RPi=Rasberry Pi).

       -rpigl    Same as "-v4l2 -vs glimagesink" for RPi.

       -rpifb    Same as "-rpi -vs kmssink" for RPi using framebuffer.

       -rpiwl    Same as "-rpi -vs waylandsink" for RPi using Wayland.

       -as sink  Choose the GStreamer audiosink; default "autoaudiosink"

                 choices:pulsesink,alsasink,osssink,oss4sink,osxaudiosink,..

       -as 0     (or -a) Turn audio off, streamed video only.

       -ca fn    In Airplay Audio (ALAC) mode, write cover-art to file fn.

       -reset n  Reset after 3n seconds client silence (default 5, 0=never).

       -nc       Do not close video window when client stops mirroring

       -FPSdata  Show video-streaming performance reports sent by client.

       -fps n    Set maximum allowed streaming framerate, default 30

       -f {H|V|I}Horizontal|Vertical flip, or both=Inversion=rotate 180 deg

       -r {R|L}  Rotate 90 degrees Right (cw) or Left (ccw)

       -m        Use random MAC address (use for concurrent UxPlay's)

       -t n      Relaunch server if no connection existed in last n seconds

       -vdmp [n] Dump h264 video output to "fn.h264"; fn="videodump", change

                  with "-vdmp [n] filename". If [n] is given, file fn.x.h264

                  x=1,2,.. opens whenever a new SPS/PPS NAL arrives, and <=n

                  NAL units are dumped.

       -admp [n] Dump audio output to "fn.x.fmt", fmt ={aac, alac, aud}, x

                  =1,2,..; fn="audiodump"; change with "-admp [n] filename".

                  x increases when audio format changes. If n is given, <= n

                  audio packets are dumped. "aud"= unknown format.

       -d        Enable debug logging

       -v        Displays version information

       -h        Displays help information