NAME

       virt-v2v-input-xen - Using virt-v2v to convert guests from Xen

SYNOPSIS

        virt-v2v -ic 'xen+ssh://root@xen.example.com'
                 -ip passwordfile
                 GUEST_NAME [-o* options]

DESCRIPTION

       This page documents how to use virt-v2v(1) to convert guests from RHEL 5 Xen, or SLES and
       OpenSUSE Xen hosts.

INPUT FROM XEN

   SSH authentication
       You can use SSH password authentication, by supplying the name of a file containing the
       password to the -ip option (note this option does not take the password directly).  You
       may need to adjust /etc/ssh/sshd_config on the Xen server to set "PasswordAuthentication
       yes".

       If you are not using password authentication, an alternative is to use ssh-agent, and add
       your ssh public key to /root/.ssh/authorized_keys (on the Xen host).  After doing this,
       you should check that passwordless access works from the virt-v2v server to the Xen host.
       For example:

        $ ssh root@xen.example.com
        [ logs straight into the shell, no password is requested ]

       With some modern ssh implementations, legacy crypto policies required to interoperate with
       RHEL 5 sshd are disabled.  To enable them you may need to run this command on the
       conversion server (ie. ssh client), but read update-crypto-policies(8) first:

        # update-crypto-policies --set LEGACY

   Test libvirt connection to remote Xen host
       Use the virsh(1) command to list the guests on the remote Xen host:

        $ virsh -c xen+ssh://root@xen.example.com list --all
         Id    Name                           State
        ----------------------------------------------------
         0     Domain-0                       running
         -     rhel49-x86_64-pv               shut off

       You should also try dumping the metadata from any guest on your server, like this:

        $ virsh -c xen+ssh://root@xen.example.com dumpxml rhel49-x86_64-pv
        <domain type='xen'>
          <name>rhel49-x86_64-pv</name>
          [...]
        </domain>

       If the above commands do not work, then virt-v2v is not going to work either.  Fix your
       libvirt configuration or the remote server before continuing.

       If the guest disks are located on a host block device, then the conversion will fail.  See
       "Xen or ssh conversions from block devices" below for a workaround.

   Importing a guest
       To import a particular guest from a Xen server, do:

        $ virt-v2v -ic 'xen+ssh://root@xen.example.com' \
                  rhel49-x86_64-pv \
                  -o local -os /var/tmp

       where "rhel49-x86_64-pv" is the name of the guest (which must be shut down).

       In this case the output flags are set to write the converted guest to a temporary
       directory as this is just an example, but you can also write to libvirt or any other
       supported target.

   Xen or ssh conversions from block devices
       Currently virt-v2v cannot directly access a Xen guest (or any guest located remotely over
       ssh) if that guest’s disks are located on host block devices.

       To tell if a Xen guest uses host block devices, look at the guest XML.  You will see:

         <disk type='block' device='disk'>
           ...
           <source dev='/dev/VG/guest'/>

       where "type='block'", "source dev=" and "/dev/..." are all indications that the disk is
       located on a host block device.

       This happens because the qemu ssh block driver that we use to access remote disks uses the
       ssh sftp protocol, and this protocol cannot correctly detect the size of host block
       devices.

       The workaround is to copy the block device from the remote Xen server to a regular local
       file, copy the libvirt guest XML, adjust the "disk" element to point to the local file,
       and use "-i libvirtxml" mode instead.

SEE ALSO

       virt-v2v(1).

AUTHOR

       Richard W.M. Jones

COPYRIGHT

       Copyright (C) 2009-2020 Red Hat Inc.

LICENSE

       This program is free software; you can redistribute it and/or modify it under the terms of
       the GNU General Public License as published by the Free Software Foundation; either
       version 2 of the License, or (at your option) any later version.

       This program is distributed in the hope that it will be useful, but WITHOUT ANY WARRANTY;
       without even the implied warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.
       See the GNU General Public License for more details.

       You should have received a copy of the GNU General Public License along with this program;
       if not, write to the Free Software Foundation, Inc., 51 Franklin Street, Fifth Floor,
       Boston, MA 02110-1301 USA.

BUGS

       To get a list of bugs against libguestfs, use this link:
       https://bugzilla.redhat.com/buglist.cgi?component=libguestfs&product=Virtualization+Tools

       To report a new bug against libguestfs, use this link:
       https://bugzilla.redhat.com/enter_bug.cgi?component=libguestfs&product=Virtualization+Tools

       When reporting a bug, please supply:

       •   The version of libguestfs.

       •   Where you got libguestfs (eg. which Linux distro, compiled from source, etc)

       •   Describe the bug accurately and give a way to reproduce it.

       •   Run libguestfs-test-tool(1) and paste the complete, unedited output into the bug
           report.