Provided by: vmware-manager_0.2.0-4_all bug

NAME

       vwm - Manage VMware virtual machines

SYNOPSIS

               vwm <command> [options]

       Global syntax:
                   vwm <command> [-f] [-v+] [-w seconds] [@profile]

       Command specific syntax:
                   vwm clone [-o pool] [-c count] [-a datastore...] [-l folder] <source vm> <new vm name>
                   vwm deploy [synonym of 'clone']
                   vwm df [-h] [datastore...]
                   vwm host [maintenance|restore|restart|shutdown|disconnect|reconnect] <hosts...>
                   vwm list [-d col1,col2... | perl string] [-t title] [vm|datastore|host|pool|template][s] [patterns...]
                   vwm migrate [-p low|normal|high] [-o pool] <vms...> <host>
                   vwm move [-o pool] <vms...> <datastore>
                   vwm setpool <low|normal|high> <cpu|mem|all> <pools...>
                   vwm show [vm|datastore|host|pool] [items...]
                   vwm snapshot [-t title] <vms...>
                   vwm state <on|off|suspend|reboot|shutdown|restart|standby> <vms...>
                   vwm version

COMMANDS

       clone   Clone a given VM or template to another VM name.  If -c is specified multiple
               copies are made. Each VM name will be incremented in the usual Perlish way. e.g.:
               DB1, DB2, DB3 etc.

               If -a is unspcified the datastore of the source VM is copied as the new clones
               datastore.  If -a is specified the data store will be set during cloning. If -a
               contains a comma denoted list the datastores will be alternated during cloning.
               e.g. -a 1,2 copies to datastore 1 then 2 then starts again at 1. Patterns of
               repeating datastores can be specified - e.g. '-a 1,2,3,2,1'.

       deploy  Synonym of 'clone'.

       df      Display disk usage information about datastores.  If a list of matches is
               provided, the data store list is filtered for those items.

       list    Display a list of the given items matching a pattern.

               Possible lists include (selection can be plural or singular):

                       vms (default if unspecified)
                       datastores
                       hosts
                       pools

               If '-d' is specified without any containing '$' marks the string is evaluated as a
               CSV with each line extracting the requisite information that would be shown with
               the 'show' command. See the EXAMPLES section for further information.

               If '-d' is specified and contains a '$' it is evaluated as a perl expression with
               $_ being set to the currently active item.

               If '-t' is spcified the titles header for the table is set.

       migrate Migrate a given list of VMs to another host.

       move    Move a given list of VMs to another datastore.

       setpool Set the share level on the given resource pools.

       show    Show information about a given object. If no specific object type is specified
               'vm' is assumed.  If no specific matching pattern is specified all objects of that
               type are listed.

       snapshot
               Take a snapshot of the matching VM's.  If '-t' is specified, it is used as the
               title of the snapshot. Otherwise the current time is used.

       state   Set the state of a list of VMs.

               This can be any of the following choices:

                       on - Power up the specified VMs
                       off - Power down the specified VMs. This is a hard power state so data loss could occur.
                       suspend - Power the machine into standby mode. This is a hard power state which does not rely on VMware tools.
                       restart - Hard power cycle the VMs. Like 'off' this is a forced power state so data loss could occur.
                       shutdown - Try shutting down the machine via VMware tools.
                       standby - Try to put the machine into the soft standby state.
                       reboot - Try shutting down the machine via VMware tools.

       version Display various version informaiton about the connected vServer and local API.
               This command is the default if no actual command is specified (i.e. just running
               'vwm' with nothing else specified).

OPTIONS

       [@profile]
               Used during: All operations
               Default: First specified profile in config
               Type: Profile name or URL

               Specifies which profile to use when addressing the vServer.  This can be an entry
               within the config file or the URL (with optional login details) e.g.

                       vwm version @cluster1
                       vwm version @cluster2
                       vwm version @https://cluster1.acme.edu
                       vwm version @https://username@cluster1.acme.edu
                       vwm version @https://username:password@cluster1.acme.edu

               Examples 1 and two assume 'custer1' and 'customer2' have been defined in the
               examples file (see EXAMPLES). The further examples specify the connection
               information on the command line.  Specifying the password from the command line is
               exceptionally silly and should be avoided.

               If username and/or password is omitted (such as in examples 3 and 4 above) they
               will be prompted for when vwm is run.

       -c
               Used during: migrate
               Default: 1
               Type: Number

               Specifies how many VMs should be created during a clone operation.  The name of
               the target VM is incremented in the usual Perlish way.  e.g.

               DBS1, DBS2, DBS3... DBS10 DB00, DB01, DB02... DB99 DBAA, DBAB, DBAC... DBZZ

       --display [col1,col2...]
       -d [col1,col2...]
               Used during: list
               Default: Name
               Type:
                   Command seperated list of columns to display in tabular output when using the
                   'list' command.  See also: -s to specify the seperation character to use
                   between the columns.

               Specify a data store for operations that require it.

       --datastore [datastore]
       --ds [datastore]
       -a [datastore]
               Used during: migrate
               Default: Same as source VM
               Type: Datastore name

               Specify a data store for operations that require it.

       --force
       -f
               Used during: All operations
               Default: off
               Type: Switch

               Force continue if an error occurs.  Normaly if an error occurs vwm will stop
               processing any operations specified on the command line.  If this flag is enabled
               vwm will continue operation as if no error occured.

       --human
       -h
               Used during: df
               Default: off
               Type: Switch

               Display the numbers of the 'df' command in a human readable format.

       --dryrun
       -n
               Used during: All operations
               Default: off
               Type: Switch

               Dry run mode.  When enabled vwm will continue as normal but no actual call to the
               VMware VServer is made.

       --folder
       -l
               Used during: clone
               Default: Source VM / templates folder
               Type: String

               Specifies the folder that the cloned machine should be moved into. If unspecified
               the source VM's folder is used instead.

       --pool [pool]
       -o [pool]
               Used during: clone, migrate, move
               Default: Same as the source VM
               Type: Pool name

               Specifies the alternate pool name to use when migrating or cloning machines. If
               unspecified the source VM's pool is used instead.

       --priority [priority]
       -p [priority]
               Used during: migrate
               Default: low
               Type: Choice of: low, normal, high

               Specifies the priority when migrating VMs.

       --seperator [character]
       -s [character]
               Used during: list
               Default: \t (tab)
               Type: String

               Specifies the string to display between columns when outputing a list.

       --title [title]
       -t [title]
               Used during: list, snapshot
               Default: The Unix EPOC (for VMs)
               Type: String

               The title of the snapshot to create or the title row of the list table.

       -v
       --verbose
               Used during: All operations
               Default: 0
               Type: Accumulating switch

               Be more verbose when outputting information to STDERR.  Specify multiple times to
               increase verbosity.

       -w [seconds]
       -wait [seconds]
               Used during: clone, host, migrate, setpool, state
               Default: 0
               Type: Number of seconds

               Force a wait for the specified number of seconds between operations.

DESCRIPTION

       A command line tool for the manipulation of VMware Virtual Machines (VM).

EXAMPLES

       vwm clone VM01 VM02
           Clone VM01 to VM02.  Since neither the datasource (-d) or pool (-o) is specified these
           details are copied from VM01.

       vwm clone DB00 DB01 -c 30
           Clone DB01 to DB02 creating 30 copies. This will actually make the machines DB01 to
           DB30.  Since neither the datasource (-d) or pool (-o) is specified these details are
           copied from VM01.

       vwm clone DB00 DB01 -c 30 -d SAN1,SAN2 -o Active
           Same as the above example but spread the datastores across SAN1 and SAN2 and move the
           machine to the 'Active' pool.

       vwm deploy Template-DBServer DB05 -l Databases
           Deploys the template Template-DBServer into DB05, moving the destination into the
           Databases folder.

       vwm clone Template-DBServer DB05 -l Databases
           This is exactly the same as above. A clone and deploy operations will automatically
           figure out if the source is a template and act accordingly.

       vwm df *2
           Display a datastore usage sheet (similar to the Unix 'df' command) for all datastores
           ending in '2'.

       vwm host maintenance Moe Homer
           Put the hosts 'Moe' and 'Homer' into maintenance mode (use 'restore' to recover from
           this).

       vwm list vms
           List all VMs.

       vwm list vms -d name,host,ip
           List all VMs - showing their name, currently allocated host and IP address.

       vwm migrate DBS* Carl
           Migrate all virtual machines matching 'DBS*' to the 'Carl' host.

       vwm migrate DBS* Lenny -w 60 -o Active -p high
           Migrate all virtual machines matching 'DBS*' with high priority to the 'Active' pool
           on the 'Lenny' host waiting 60 seconds between machine.

       vwm move DB00 DB01 SAN2 @cluster2
           Move VMs DB00 and DB01 to the SAN2 datastore within profile 'cluster2'.

       vwm show host Lisa
           Show information on host 'Lisa'.

       vwm snapshot DB04 DB05 -t 'Todays backup'
           Take a snapshot of VMs 'DB04' and 'DB05' using the title 'Todays backup'

       vwm state on DB00 DB01 -w 30
           Turn DB00 and DB01 on waiting 30 seconds between machines.

       vwm state on DB00 DB01 -w 30 -f
           Turn DB* VMs on.  -f ensures that even if any of the machines fail to turn on for any
           reason the remaining machines will still be sent the 'on' command.

FILES

       /etc/vmmrc
               VMM config file for all users.

       .vmmrc  VMM config file for the local user.

CONFIG

       The /etc/vmmrc and .vmmrc files will be processed to determine VMM's configuration, the
       latter file taking precedence.

       The layout of the config file spcifies which profiles to use.

               [GLOBAL]
               rewrite host = s/^(.+?)\./\1/
               verbose = 2
               profile = Cluster1
               dryrun = 0
               human = 1
               force = 0
               seperator = \t
               http_proxy = http://myproxy.example.com:8080
               https_proxy = http://myproxy.example.com:8080

               [Cluster1]
               url = https://cluster1.acme.edu
               username = admin
               password = password

               [Cluster2]
               url = https://cluster2.acme.edu
               username = administrator
               password = changeme

       [GLOBAL]
               The meta global section. Any option specified here will be automatically carried
               into each profiles config.

               In the main example Cluster1 will have a 'verbose' option of 2. Cluster2 will have
               a 'verbose' option of 1 since it overrides the global setting.

       [profile]
               The name (case-insensitive) of the profile to define.

       url     The connection URL of the vServer system within the profile

       username and password
               The authentication information when connecting to the vServer.

       dryrun  Specify a default dry run value. See -n for further information.

       force   If an error is encounted during a multiple VM operation the default behaviour is
               to stop execution. If this setting is set to '1' this behaviour will be overridden
               and operations will continue even if an error is encounted.

       http_proxy
       https_proxy
               Forceably set the HTTP(s)_PROXY environment variable to the provided value before
               connecting.  This is included to assist basic login shells where these variables
               are not imported correctly.

       human   Always output numbers in a human readable format rather than the raw form.

       priority
               Specify a default priority when using any command that is '-p' compatible.

       profile Specify the default profile to use if none is explicitally set. If not specified
               the first found profile in the config file is used.

       rewrite host
               Specify a substitution regular expression to use when correcting host names.  The
               value given in the above example will remove any trailing DNS name correcting
               'host1.a.very.long.dns.com' to 'host1'.

       seperator
               Specify the seperator character used when outputting tabular data with the 'list'
               command.

       verbose Specify a default verbosity level. See -v for further information.

INSTALLATION

       VMM requires a few external modules before it can work correctly. Follow the following
       stages to get everything working.

       * Install the VMware Perl SDK from http://www.vmware.com/support/developer/viperltoolkit/

        This requires the packages libclass-methodmaker-perl libcrypt-ssleay-perl
        libsoap-lite-perl libuuid-perl libxml-libxml-perl.

       * Setup the config file. See either the CONFIG section above or use the sample file from
       /usr/share/doc/vmware-manager.

       * Run VMM with a simple command to make sure everything is setup right.

               vwm version

       * Enjoy

BUGS

       Quite probably.

       Please report to https://github.com/hash-bang/VMM when found.

AUTHOR

       Matt Carter <m@ttcarter.com>