Provided by: wmppp.app_1.3.2-2_amd64 bug

NAME

       wmppp - Graphically monitor the average PPP load

SYNOPSIS

       wmppp [OPTIONS]

DESCRIPTION

       wmppp.app  displays  a  dynamic  representation  of  the  load  on the PPP line on a 64x64
       miniwindow. It also starts and stops the connection and displays the time  enlapsed  since
       the it came up. The traffic on the interface is also monitored.

OPTIONS

       -display <display name>
              name of display to use

       -geometry +XPOS+YPOS
              initial window position

       -t     sets the on-line timer to display MM:SS instead of the default HH:MM.

       -u <update rate>
              sets  the  frequency, in seconds, for updates to the display.  Valid range is 1-10,
              default value is 5.

       -i <device>
              choose the net device (ppp1, ippp0, etc.) to monitor.  (Note that this  feature  is
              EXPERIMENTAL and should be used with caution.  Bug reports are welcomed.)

       -speed <cmd>
              command to report connection speed

       -start <cmd>
              command to connect

       -stop <cmd>
              command to disconnect

       -ifdown <cmd>
              command to redial

       -stampfile <path>
              file used to calculate uptime

       -h     displays a command line summary

       -v     displays the version number.

CONFIGURATION

       The  configuration  file (see below) may contain any of the following key-value pairs. The
       format is key: value.  Note that these values will be  overwritten  by  the  corresponding
       command line options.

       start  The program that starts the connection

       stop   The program that stops the connection

       speed  This  program  reports  the  speed  of  the  connection. This program should output
              <speed>, that is, a number is expected and not the whole

       ifdown This program is run if the line goes down, and the stop program  hasn't  been  run.
              (Redial program)

       stampfile
              The  modification  time  of  this  file is used to calculate the amount of time the
              connection has been up. Something like touch <stampfile> should be run for this  to
              work.

FILES

       /var/run/wmppp.ppp0
              this  is  the  stamp  file  use  to determine the amount of time enlapsed since the
              connection came up. This file should be managed by the ip-up and  ip-down  scripts.
              On  Debian  systems,  /etc/ppp/ip-up.d/00wmppp  creates  the file, and /etc/ppp/ip-
              down.d/00wmppp removes it.

       /etc/wmppprc
              System wide defaults

       $HOME/.wmppprc
              User defined settings

       /etc/wmppprc.fixed
              System wide fixed options, this overrides the user settings

AUTHORS

       wmppp.app  was  written  by  Martijn  Pieterse  <pieterse@xs4all.nl>  and  Antoine   Nulle
       <warp@xs4all.nl>,  and  it's  based  on  work  by  Beat  Christen  <bchriste@iiic.ethz.ch>
       (asclock) and Michael Callahan <callahan@maths.ox.ac.uk>, Al Longyear  longyear@netcom.com
       and Paul Mackerras <Paul.Mackerras@cs.anu.edu.au> (pppstats).

       Email regarding wmppp should be sent to wmaker-dev@lists.windowmaker.org.

       This manpage was written by Marcelo Magallon <mmagallo@debian.org for the Debian Project

SEE ALSO

       pppd(8), pppstats(8), plog(1), pon(1), poff(1)