Provided by: plc-utils-extra_0.0.6+git20211210.358dfcf-2_amd64 
NAME
xml2pib - Qualcomm Atheros XML driven PIB editor
SYNOPSIS
xml2pib [options] pib-file [pib-file] [...]
DESCRIPTION
The Atheros PIB XML Editor modifies an Atheros PIB file based on XML instructions defined
in one or more instruction files. Instruction files must be valid XML and conform to
schema file piboffset.xsd or errors will occur. Always validate XML files against this
schema with a validating parser before submitting them to this program. Firefox or
Internet Explorer are suitable for validation purposes purpose.
This program is part of the Qualcomm Atheros Powerline Toolkit. See the AMP man page for
an overview and installation instructions.
OPTIONS
-f filename
The XML instruction file. XML instruction files must conform to the Qualcomm
Atheros scheme designed for this purpose. If more that one .xml file is specified
then edits are applied in order of filename such that later edit instructions can
over-write eariler instructions. Instruction files usually have a .xml extension
but this program makes no assumption based on filename and does not enforce any
filename conventions.
-o Print the appropriate XML schema on stdout. This schema should be used to validate
XML instructions using a validating parser such as Firefox or Microsoft Internet
Explorer.
-q Suppresses printing of progress messages. This option has no effect at this time.
-v Print additional information. This option has no effect at this time.
-?,--help
Print program help summary on stdout. This option takes precedence over other
options on the command line.
-!,--version
Print program version information on stdout. This option takes precedence over
other options on the command line. Use this option when sending screen dumps to
Atheros Technical Support so that they know exactly which version of the Linux
Toolkit you are using.
ARGUMENTS
pib-file
An Atheros parameter filename. Only one parameter file can be edited at a time and
so care must be taken to avoid the use of wildcard filenames. Parameter files
usually have a .pib extension but this program makes no assumption based on
filename and does not enforce any filename conventions.
SCHEMA
The official Atheros XML PIB Edit schema follows. It defines general instruction file
structure and the elements used to edit PIB files. This file should be a controlled
document and instruction files should always be validated against it before using them to
edit a PIB file. An explanation of this file appears below.
<?xml version='1.0' encoding='iso-8859-1'?>
<xs:schema xmlns:xs='http://www.w3.org/2001/XMLSchema' elementFormDefault='qualified'>
<xs:element name='pib'>
<xs:complexType>
<xs:sequence>
<xs:element maxOccurs='unbounded' ref='object'/>
</xs:sequence>
</xs:complexType>
</xs:element>
<xs:element name='object'>
<xs:complexType>
<xs:attribute name='name' use='required' type='xs:NCName'/>
<xs:sequence>
<xs:sequence>
<xs:element ref='offset'/>
<xs:element ref='length'/>
</xs:sequence>
<xs:choice>
<xs:element ref='array'/>
<xs:element ref='dataString'/>
<xs:element ref='dataHuge'/>
<xs:element ref='dataLong'/>
<xs:element ref='dataWord'/>
<xs:element ref='dataByte'/>
</xs:choice>
</xs:sequence>
</xs:complexType>
</xs:element>
<xs:element name='length' type='xs:positiveInteger'/>
<xs:element name='offset' type='xs:hexBinary'/>
<xs:element name='array'>
<xs:complexType>
<xs:choice maxOccurs='unbounded'>
<xs:element ref='dataByte'/>
<xs:element ref='dataHex'/>
</xs:choice>
</xs:complexType>
</xs:element>
<xs:element name='dataString' type='xs:string'/>
<xs:element name='dataHuge' type='xs:unsignedLong'/>
<xs:element name='dataLong' type='xs:unsignedInt'/>
<xs:element name='dataWord' type='xs:unsignedShort'/>
<xs:element name='dataByte' type='xs:unsignedByte'/>
<xs:element name='dataHex' type='xs:hexBinary'/>
</xs:schema>
ELEMENTS
<pib> The Parameter Information Block subject to edit. There is exactly one pib defined
in an instruction file.
<object>
A data region withn a pib. There must be at least one object defined inside a pib.
Each object has an offset, a length and data where data is expressed as one
dataString, a dataByte, a dataHex or an array as described below. The name
attribute optional but may be used for clarity or for reporting purposes.
<offset>
The relative position of the object in bytes expressed in hexadecimal. The offset
plus the length of an object cannot exceed PIB length or an error will occur. The
offset and length element can appear in either order but both must appear before
the data element. The offset element is required.
<length>
The extent of the object expressed in decimal bytes. The offset plus length of an
object cannot exceed PIB length. The the offset and length elements can occur in
either order but both must precede the data element. The length element is
required for elements array and dataString but may be omitted for elements
dataHuge, dataLong, dataWord and dataByte.
<array>
A sequence of dataByte and/or dataHex elements. The implied length is determined
by array members but must equal the object length attribute or an error will occur.
A dataString is illegal inside an array.
<dataString>
Any sequence of printable characters. The implied length is 1 byte longer than the
number of characters. The string will be truncated or padded with NUL bytes to
match the object length attribute. An object length attribute of 0 stores one NUL
byte. A dataString element is illegal within an array block.
<dataHuge>
A unsigned decimal integer string that represents any 64 bit binary value. The
implied length is 8 bytes. The object length attribute is ignored and may be
omitted.
<dataLong>
A unsigned decimal integer string that represents any 32 bit binary value. The
implied length is 4 bytes. The object length attribute is ignored and may be
omitted.
<dataWord>
A unsigned decimal integer string that represents any 16 bit binary value. The
implied length is 2 bytes. The object length attribute is ignored and may be
omitted.
<dataByte>
An unsigned decimal digit string that represents any 8 bit binary value. The
implied length is 1 byte. The object length attribute is ignored and may be
omitted.
<dataHex>
A hexadecimal digit string that represents one byte for each digit pair (octet)
present. There must be an even number of digits or an error will occur. The
resulting length must equal the object length unless the value appears inside an
array. Inside an array, the resulting length must not exceed the remaining array
length.
PROCESS
The program reads one PIB file and replaces selected values with new ones, computes the
new checksum and re-writes the file. New values are defined by offset, length, format and
value. The object name is actually irrelevant. Critical values are the offset, length
and data type/value. Obviously, care must be taken when specifying offsets and lengths to
avoid editing objects incorrectly.
INSTRUCTIONS
An example instruction file follows. It references the Qualcomm Atheros XML PIB Edit
schema file, piboffset.xsd, that is shown above so that a validating parser can find the
schema and perform document checks. The remainder of the file describes a series of
object names, offsets, lengths and values that describe the edits to be performed.
<pib xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance"
xsi:noNamespaceSchemaLocation="piboffset.xsd">
<object name="HFID_Manufacturer">
<offset>0024</offset>
<length>64</length>
<dataString>Atheros HomePlug AV Device</dataString>
</object>
<object name="HFID_User">
<length>64</length>
<offset>0074</offset>
<dataString>Atheros</dataString>
</object>
<object name="MDURole">
<offset>0101</offset>
<dataByte>0</dataByte>
</object>
<object name="PriorityTTl">
<offset>0210</offset>
<length>16</length>
<array>
<dataHex>80841E008084</dataHex>
<dataHex>1e</dataHex>
<dataByte>0</dataByte>
<dataHex></dataHex>
<dataHex></dataHex>
<dataHex></dataHex>
<dataHex></dataHex>
<dataHex>C0</dataHex>
<dataByte>198</dataByte>
<dataHex>2d</dataHex>
<dataHex>00</dataHex>
</array>
</object>
<object name="VLANPrioTOSPrecMatrix">
<length>4</length>
<offset>0224</offset>
<array>
<dataByte>65</dataByte>
<dataByte>250</dataByte>
<dataHex></dataHex>
<dataHex>Fa</dataHex>
</array>
</object>
<object name="EnableLEDThroughputIndicate">
<length>1</length>
<offset>1E94</offset>
<dataByte>0</dataByte>
</object>
<object name="HFID_AVLN">
<length>64</length>
<offset>00B4</offset>
<dataString>Atheros-Net</dataString>
</object>
</pib>
EXAMPLES
The following example reads PIB file abc.pib and edits it according to instructions found
in XML file local.xml. The PIB file is always specified first, followed by one or more
XML instruction files.
# xml2pib abc.pib local.xml
The following example reads PIB file abc.pib and edits it according to three XML
instruction files, in the order specified. Order can be critical since later edits could
over-write earlier edits.
# xml2pib abc.pib standard.xml custom.xml errata.xml
The following example does nothing because no instruction files are specified.
# xml2pib abc.pib
SEE ALSO
chkpib(7), chkpib2(7), getpib(7), modpib(1), pib2xml(1), pibcomp(1), pibdump(1), setpib(1)
CREDITS
Charles Maier