Provided by: libtest-effects-perl_0.001005-3_all bug

NAME

       Test::Effects - Test all effects at once (return value, I/O, warnings, exceptions, etc.)

VERSION

       This document describes Test::Effects version 0.001005

SYNOPSIS

           use Test::Effects;

           # Test all possible detectable side-effects of some code...
           effects_ok { your_code_here() }
                  {
                      return => $expected_scalar_context_return_value,
                      warn   => qr/match expected warning text/,
                      stdout => '',  # i.e. Doesn't print anything.
                  }
                  => 'Description of test';

           # Test only specifically requested side-effects of some code...
           effects_ok { your_code_here() }
                  ONLY {
                      return => \@expected_list_context_return_values,
                      stderr => 'Expected output to STDERR',
                      die    => undef,  # i.e. Doesn't die.
                      exit   => undef,  # i.e. Doesn't exit either.
                  }
                  => 'Description of test';

           # Test that some code has no detectable side-effects...
           effects_ok { your_code_here() };

DESCRIPTION

       Test::Effects provides a single exported subroutine: "effects_ok"

       This sub expects a block of code (or sub ref) as its first argument, followed by an
       optional hash ref as its second, and an optional string as its third.

       The first argument specifies some code to be tested. This code is run in void context by
       default, but may instead be called in either list or scalar context, depending on the test
       specification provided by the second argument. The block is run within a call to
       "Test::Trap::trap()", so all warnings, exceptions, output, and exit attempts are trapped.
       The block may contain calls to other Test::Builder-based testing modules; these are
       handled correctly within the overall test.

       The second argument is a hash reference, whose entries specify the expected side-effects
       of executing the block. You specify the name of the side-effect you're interested in as
       the key, and the "effect" you expected as the value. Side-effects that are not explicitly
       specified are automatically tested for default behaviour (e.g. no warnings, no exceptions,
       no output, not call to "exit()", etc. If the entire hash is omitted, all possible side-
       effects are tested for default behaviour (in other words, did the block of code have no
       side-effects whatsoever?)

       The third argument is the overall description of the test (i.e. the usual final argument
       for Perl tests). If omitted, "effects_ok()" generates a description based on the line
       number at which it was called.

INTERFACE

   "use Test::Effects;"
       Loads the module, and exports the "effects_ok()", "VERBOSE()", "ONLY()", and "TIME()"
       subroutines (see below). Also exports the standard interface from the Test::More module.

   "use Test::Effects tests => $N;"
       Exactly the same as:

           use Test::More tests => $N;

       In fact, "use Test::Effects" can take all the same arguments as "use Test::More".

   "use Test::Effects import => [':minimal'];"
       Only export the "effects_ok()" subroutine.

       Do not export "VERBOSE()", "ONLY()", "TIME()", or any of the Test::More interface.

   "use Test::Effects import => [':more'];"
       Only export the "effects_ok()" subroutine and the Test::More interface

       Do not export "VERBOSE()", "ONLY()", or "TIME()".

   "effects_ok {BLOCK} {EFFECTS_HASH} => 'TEST_DESCRIPTION';"
       Test the code in the block, ensuring that the side-effects named by the keys of the hash
       match the corresponding hash values. Both the hash and the description arguments are
       optional.

       The effects that can be specified as key/value pairs in the hash are:

       "void_return => undef"
           Call the block in void context.

       "return      => $ARRAY_REFERENCE"
       "list_return => $ANY_SCALAR_VALUE"
           Call the block in list context. The final value evaluated in the block should (deeply)
           match the specified array ref or scalar value of the option.

       "return        => $NON_ARRAYREF"
       "scalar_return => $ANY_SCALAR_VALUE"
           Call the block in scalar context. The final value evaluated in block should match the
           specified scalar value of the option.

       "stdout => $STRING"
           What the block wrote to "STDOUT" should be "eq" to $STRING.

       "stdout => $REGEX"
           What the block wrote to "STDOUT" should be match $REGEX.

       "stdout => $CODE_REF"
           The subroutine specified by the code ref should return true when passed what the block
           wrote to "STDOUT".

           The subroutine can call nested tests (such as Test::More's "is") or Test::Tolerant's
           "is_tol") and these will be correctly handled.

       "stderr => $STRING"
       "stderr => $REGEX"
       "stderr => $CODE_REF"
           What the block writes to "STDERR" should "match" the specified value (either "eq", or
           "=~", or return true when passed as an argument).

           Note that, if this option is not specified, but the 'warn' option (see below) is
           specified, then this option defaults to the value of the 'warn' option.

       "warn => $STRING"
       "warn => $REGEX"
       "warn => $CODE_REF"
       "warn => [ $STRING1, $REGEX2, $CODE_REF3, $ETC ]"
           The block should issue the specified number of warnings, and each of these warnings
           should match the corresponding value specified, in the order specified.

       "die => $STRING"
       "die => $REGEX"
       "die => $CODE_REF"
           The block should raise an exception, which should match the value specified.

           Note: when using OO exceptions, use a code ref to test them:

               die => sub { shift->isa('X::BadData') }

           You can also use Test::More-ish tests, if you prefer:

               die => sub { isa_ok(shift, 'X::BadData') }

       "exit => $NUMBER"
       "exit => $REGEX"
       "exit => $CODE_REF"
           The block should call "exit()" and the exit code should match the value specified.

       "timing => { min => $MIN_SEC, max => $MAX_SEC }"
       "timing => [$MIN_SEC, $MAX_SEC]"
       "timing => $MAX_SEC"
           This option performs a separate timing measurment for the block, by running it
           multiple times over at least 1 cpu-second and averaging the times required for each
           run (i.e. like the Benchmark module does).

           When passed a hash reference, the 'min' and 'max' entries specify the range of
           allowable timings (in seconds) for the block.  For example:

               # Test our new snooze() function...
               effects_ok { snooze(1.5, plus_or_minus=>0.2); }
                          {
                               timing => { min => 1.3, max => 1.7 },
                          }
                          => 'snooze() slept about the right amount of time';

           The default for 'min' is zero seconds; the default for 'max' is eternity.

           If you use an array reference instead of a hash reference, the first value in the
           array is taken as the minimum time, and the final value is taken as the maximum
           allowed time. Hence the above time specification could also be written:

               timing => [ 1.3, 1.7 ],

           But don't write:

               timing => [ 1.3 .. 1.7 ],

           (unless your limits are integers), because Perl truncates the bounds of a range, so it
           treats "[1.3 .. 1.7]" as "[1 .. 1]".

           If you use a number instead of a reference, then number is taken as the maximum time
           allowed:

               timing => 3.2,    # Same as: timing => { min => 0, max => 3.2 }

           If you do not specify either time limit:

               timing => {},

           or:

               timing => [],

           then the "zero-to-eternity" defaults are used and "effects_ok()" simply times the
           block and reports the timing (as a success).

           Note that the timings measured using this option are considerably more accurate than
           those produced by the "TIME => 1" option (see below), but also take significantly
           longer to measure.

       Other configuration options that can be specified as key/value pairs in the hash are:

       "VERBOSE => $BOOLEAN"
           If the value is true, all side-effect tests are reported individually (running them in
           a subtest).

           When this option is false (or omitted) only the overall result, plus any individual
           failures, are reported.

       "ONLY => $BOOLEAN"
           If the value is true, only the effects explicitly requested by the other keys of this
           hash are tested for. In other words, this option causes "effects_ok()" to omit the
           "default" tests for unnamed side-effects.

           When this option is false (or omitted) unspecified options are tested for their
           expected default behaviour.

       "TIME => $BOOLEAN"
           If the value is true, the block is timed as it is executed.  The timing is reported in
           the final TAP line.

           Note that this option is entirely independent of the 'timing' option (which times the
           block repeatedly and then tests it against specified limits).

           In contrast, the 'TIME' option merely times the block once, while it is being
           evaluated for the other tests. This is much less accurate, but also much faster and
           much less intrusive, when you merely want an rough indication of performance.

       "WITHOUT => 'Module::Name'"
       "WITHOUT => qr/Module::.*/"
           Execute the block as if the specified module (or all modules matching the specified
           pattern) were not installed.

       "WITHOUT => 'lib/path/'"
       "WITHOUT => qr{lib/*}"
           Execute the block as if the specified library directory (or all directories matching
           the specified pattern) were not accessible.

           The specified patch must include at least one slash ("/"), otherwise it will be
           interpreted as a module name (see above). You can always add a redundant slash at the
           end of the path, if necessary:

               WITHOUT => 'lib',     # Test without the C<lib.pm> module

               WITHOUT => 'lib/',    # Test without the C<lib> directory

   "VERBOSE $HASH_REF"
       A call to:

           effects_ok { BLOCK }
                      VERBOSE { return => 0, stdout => 'ok' }

       is just a shorthand for:

           effects_ok { BLOCK }
                      { return => 0, stdout => 'ok', VERBOSE => 1 }

   "ONLY $HASH_REF"
       A call such as:

           effects_ok { BLOCK }
                      ONLY { return => 0, stdout => 'ok' }

       is just a shorthand for:

           effects_ok { BLOCK }
                      { return => 0, stdout => 'ok', ONLY => 1 }

   "TIME $HASH_REF"
       A call such as:

           effects_ok { BLOCK }
                      TIME { return => 0, stdout => 'ok' }

       is just a shorthand for:

           effects_ok { BLOCK }
                      { return => 0, stdout => 'ok', TIME => 1 }

       Note that the "VERBOSE", "ONLY", and "TIME" subs can be "stacked" (in any combination and
       order):

           effects_ok { BLOCK }
                      TIME ONLY VERBOSE { return => 0, stdout => 'ok' }

           effects_ok { BLOCK }
                      VERBOSE ONLY { return => 0, stdout => 'ok' }

   "use Test::Effects::VERBOSE;"
       This causes every subsequent call to "effects_ok()" in the current lexical scope to act as
       if it had a "VERBOSE => 1" option set.

       Note, however, that an explicit "VERBOSE => 0" in any call in the scope overrides this
       default.

   "no Test::Effects::VERBOSE;"
       This causes every subsequent call to "effects_ok()" in the current lexical scope to act as
       if it had a "VERBOSE => 0" option set. Again, however, an explicit "VERBOSE => 1" in any
       call in the scope overrides this default.

   "use Test::Effects::ONLY;"
       This causes every subsequent call to "effects_ok()" in the current lexical scope to act as
       if it had a "ONLY => 1" option set.

       Note, however, that an explicit "ONLY => 0" in any call in the scope overrides this
       default.

   "no Test::Effects::ONLY;"
       This causes every subsequent call to "effects_ok()" in the current lexical scope to act as
       if it had a "ONLY => 0" option set. Again, however, an explicit "ONLY => 1" in any call in
       the scope overrides this default.

   "use Test::Effects::TIME;"
       This causes every subsequent call to "effects_ok()" in the current lexical scope to act as
       if it had a "TIME => 1" option set.

       Note, however, that an explicit "TIME => 0" in any call in the scope overrides this
       default.

   "no Test::Effects::TIME;"
       This causes every subsequent call to "effects_ok()" in the current lexical scope to act as
       if it had no "TIME => 0" option set. Again, however, an explicit "TIME => 1" in any call
       in the scope overrides this default.

DIAGNOSTICS

       "Second argument to effects_ok() must be hash or hash reference, not %s"
           "effects_ok()" expects a hash as its second argument, but you passed something else.
           This can happen if you forget to put braces around a single option, such as:

               effects_ok { test_code() }
                          warn => qr/Missing arg/;

           That needs to be:

               effects_ok { test_code() }
                          { warn => qr/Missing arg };

           Or you may have accidentally used an array instead of a hash:

               effects_ok { test_code() }
                          [ warn => qr/Missing arg ];

           That is not supported, as it is being reserved for a future feature.

       "Invalid timing specification: timing => %s"
           The 'timing' option expects a hash reference, array reference, or a single number as
           its value. You specified some value that was something else (and which "effects_ok()"
           therefore didn't understand).

CONFIGURATION AND ENVIRONMENT

       Test::Effects requires no configuration files or environment variables.

DEPENDENCIES

       Requires Perl 5.14 (or better).

       Requires the Test::Trap module, v0.2.1 (or better).

INCOMPATIBILITIES

       None reported.

BUGS AND LIMITATIONS

       Ironically, the test suite for this module is as yet unsatisfactory.  (T.D.D. Barbie says:
       "Testing test modules is HARD!")

       No other bugs have been reported.

       Please report any bugs or feature requests to "bug-test-effects@rt.cpan.org", or through
       the web interface at <http://rt.cpan.org>.

AUTHOR

       Damian Conway  "<DCONWAY@CPAN.org>"

LICENCE AND COPYRIGHT

       Copyright (c) 2012, Damian Conway "<DCONWAY@CPAN.org>". All rights reserved.

       This module is free software; you can redistribute it and/or modify it under the same
       terms as Perl itself. See perlartistic.

DISCLAIMER OF WARRANTY

       BECAUSE THIS SOFTWARE IS LICENSED FREE OF CHARGE, THERE IS NO WARRANTY FOR THE SOFTWARE,
       TO THE EXTENT PERMITTED BY APPLICABLE LAW. EXCEPT WHEN OTHERWISE STATED IN WRITING THE
       COPYRIGHT HOLDERS AND/OR OTHER PARTIES PROVIDE THE SOFTWARE "AS IS" WITHOUT WARRANTY OF
       ANY KIND, EITHER EXPRESSED OR IMPLIED, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
       WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE. THE ENTIRE RISK AS TO
       THE QUALITY AND PERFORMANCE OF THE SOFTWARE IS WITH YOU. SHOULD THE SOFTWARE PROVE
       DEFECTIVE, YOU ASSUME THE COST OF ALL NECESSARY SERVICING, REPAIR, OR CORRECTION.

       IN NO EVENT UNLESS REQUIRED BY APPLICABLE LAW OR AGREED TO IN WRITING WILL ANY COPYRIGHT
       HOLDER, OR ANY OTHER PARTY WHO MAY MODIFY AND/OR REDISTRIBUTE THE SOFTWARE AS PERMITTED BY
       THE ABOVE LICENCE, BE LIABLE TO YOU FOR DAMAGES, INCLUDING ANY GENERAL, SPECIAL,
       INCIDENTAL, OR CONSEQUENTIAL DAMAGES ARISING OUT OF THE USE OR INABILITY TO USE THE
       SOFTWARE (INCLUDING BUT NOT LIMITED TO LOSS OF DATA OR DATA BEING RENDERED INACCURATE OR
       LOSSES SUSTAINED BY YOU OR THIRD PARTIES OR A FAILURE OF THE SOFTWARE TO OPERATE WITH ANY
       OTHER SOFTWARE), EVEN IF SUCH HOLDER OR OTHER PARTY HAS BEEN ADVISED OF THE POSSIBILITY OF
       SUCH DAMAGES.