Provided by: blt-dev_2.5.3+dfsg-4.1build2_amd64 bug

NAME

       spline -  Fit curves with spline interpolation

SYNOPSIS

       spline natural x y sx sy

       spline quadratic x y sx sy
_________________________________________________________________

DESCRIPTION

       The  spline  command  computes a spline fitting a set of data points (x and y vectors) and
       produces a vector of the  interpolated  images  (y-coordinates)  at  a  given  set  of  x-
       coordinates.

INTRODUCTION

       Curve  fitting  has  many  applications.   In  graphs,  curve  fitting  can  be useful for
       displaying curves which are aesthetically pleasing to the eye.  Another advantage is  that
       you can quickly generate arbitrary points on the curve from a small set of data points.

       A  spline  is  a  device  used  in drafting to produce smoothed curves.  The points of the
       curve, known as knots, are fixed and the spline, typically a thin strip of wood or  metal,
       is  bent  around  the  knots  to  create  the smoothed curve.  Spline interpolation is the
       mathematical equivalent.  The curves between adjacent knots are piecewise  functions  such
       that  the resulting spline runs exactly through all the knots.  The order and coefficients
       of the polynominal determine the "looseness" or "tightness" of the curve fit from the line
       segments formed by the knots.

       The  spline  command  performs  spline  interpolation using cubic ("natural") or quadratic
       polynomial functions.  It computes the spline based upon the knots, which are given  as  x
       and  y  vectors.   The  interpolated  new  points  are  determined by another vector which
       represents the abscissas (x-coordinates) or the new points.  The ordinates (y-coordinates)
       are interpolated using the spline and written to another vector.

EXAMPLE

       Before  we  can  use  the  spline  command,  we  need to create two BLT vectors which will
       represent the knots (x and y coordinates) of the data that we're going to fit.  Obviously,
       both vectors must be the same length.

              # Create sample data of ten points.
              vector x(10) y(10)

              for {set i 10} {$i > 0} {incr i -1} {
                  set x($i-1) [expr $i*$i]
                  set y($i-1) [expr sin($i*$i*$i)]
              }

       We now have two vectors x and y representing the ten data points we're trying to fit.  The
       order of the values of x must be monotonically increasing.  We can use the  vector's  sort
       operation to sort the vectors.

              x sort y

       The components of x are sorted in increasing order.  The components of y are rearranged so
       that the original x,y coordinate pairings are retained.

       A third vector is needed to indicate the abscissas (x-coordinates) of the new points to be
       interpolated  by  the  spline.   Like  the  x  vector,  the  vector  of  abscissas must be
       monotonically increasing.  All the abscissas must lie between the first and last knots  (x
       vector) forming the spline.

       How  the  abscissas  are  picked is arbitrary.  But if we are going to plot the spline, we
       will want to include the knots too.  Since both the quadratic and natural splines preserve
       the  knots  (an  abscissa from the x vector will always produce the corresponding ordinate
       from the y vector), we can simply make the new vector a superset of x.   It  will  contain
       the  same coordinates as x, but also the abscissas of the new points we want interpolated.
       A simple way is to use the vector's populate operation.

              x populate sx 10

       This creates a new vector sx.  It contains the abscissas of x, but  in  addition  sx  will
       have  ten evenly distributed values between each abscissa.  You can interpolate any points
       you wish, simply by setting the vector values.

       Finally, we generate the ordinates (the images of the spline) using  the  spline  command.
       The ordinates are stored in a fourth vector.

              spline natural x y sx sy

       This  creates a new vector sy.  It will have the same length as sx.  The vectors sx and sy
       represent the smoothed curve which we can now plot.

              graph .graph
              .graph element create original -x x -y x -color blue
              .graph element create spline -x sx -y sy -color red
              table . .graph

       The natural operation employs a cubic interpolant when forming the spline.   In  terms  of
       the  draftmen's  spline,  a natural spline requires the least amount of energy to bend the
       spline (strip of wood), while still passing through each knot.  In mathematical terms, the
       second derivatives of the first and last points are zero.

       Alternatively,  you  can  generate  a  spline  using  the  quadratic operation.  Quadratic
       interpolation produces a spline which follows the line segments of the  data  points  much
       more closely.

              spline quadratic x y sx sy

OPERATIONS

       spline natural x y sx sy
              Computes a cubic spline from the data points represented by the vectors x and y and
              interpolates new points using vector sx as the  x-coordinates.   The  resulting  y-
              coordinates  are  written  to a new vector sy. The vectors x and y must be the same
              length and contain at least three components.  The order of  the  components  of  x
              must be monotonically increasing.  Sx is the vector containing the x-coordinates of
              the points to be interpolated.  No component of sx can be less than first component
              of x or greater than the last component.  The order of the components of sx must be
              monotonically increasing.  Sy is the name of the vector  where  the  calculated  y-
              coordinates  will  be  stored.   If sy does not already exist, a new vector will be
              created.

       spline quadratic x y sx sy
              Computes a quadratic spline from the data points represented by the vectors x and y
              and interpolates new points using vector sx as the x-coordinates.  The resulting y-
              coordinates are written to a new vector sy.  The vectors x and y must be  the  same
              length  and  contain  at  least three components.  The order of the components of x
              must be monotonically increasing.  Sx is the vector containing the x-coordinates of
              the  points to be interpolated. No component of sx can be less than first component
              of x or greater than the last component.  The order of the components of sx must be
              monotonically  increasing.   Sy  is  the name of the vector where the calculated y-
              coordinates are stored.  If sy does  not  already  exist,  a  new  vector  will  be
              created.

REFERENCES

       Numerical Analysis
       by R. Burden, J. Faires and A. Reynolds.
       Prindle, Weber & Schmidt, 1981, pp. 112

       Shape Preserving Quadratic Splines
       by D.F.Mcallister & J.A.Roulier
       Coded by S.L.Dodd & M.Roulier N.C.State University.

       The original code for the quadratric spline can be found in TOMS #574.

KEYWORDS

       spline, vector, graph