Provided by: tcllib_1.21+dfsg-1_all 
NAME
struct::record - Define and create records (similar to 'C' structures)
SYNOPSIS
package require Tcl 8.2
package require struct::record ?1.2.2?
record define recordName recordMembers ?instanceName1 instanceName2 ...?
record show record
record show instances recordName
record show members recordName
record show values instanceName
record exists record recordName
record exists instance instanceName
record delete record recordName
record delete instance instanceName
instanceName cget -member
instanceName cget -member1 -member2
instanceName cget
instanceName configure
instanceName
instanceName configure -member value
instanceName configure -member1 value1 -member2 value2
recordName instanceName|#auto ?-member1 value1 -member2 value2 ...?
instanceName cget ?-member1 -member2 ...?
instanceName configure ?-member1 value1 -member2 value2 ...?
_________________________________________________________________________________________________
DESCRIPTION
The ::struct::record package provides a mechanism to group variables together as one data
structure, similar to a C structure. The members of a record can be variables or other
records. However, a record can not contain circular records, i.e. records that contain the
same record as a member.
This package was structured so that it is very similar to how Tk objects work. Each record
definition creates a record object that encompasses that definition. Subsequently, that
record object can create instances of that record. These instances can then be manipulated
with the cget and configure methods.
The package only contains one top level command, but several sub commands (see below). It
also obeys the namespace in which the record was defined, hence the objects returned are
fully qualified.
record define recordName recordMembers ?instanceName1 instanceName2 ...?
Defines a record. recordName is the name of the record, and is also used as an
object command. This object command is used to create instances of the record
definition. The recordMembers are the members of the record that make up the record
definition. These are variables and other records. If optional instanceName args
are specified, then an instance is generated after the definition is created for
each instanceName.
record show record
Returns a list of records that have been defined.
record show instances recordName
Returns the instances that have been instantiated by recordName.
record show members recordName
Returns the members that are defined for record recordName. It returns the same
format as how the records were defined.
record show values instanceName
Returns a list of values that are set for the instance instanceName. The output is
a list of key/value pairs. If there are nested records, then the values of the
nested records will itself be a list.
record exists record recordName
Tests for the existence of a record with the name recordName.
record exists instance instanceName
Tests for the existence of a instance with the name instanceName.
record delete record recordName
Deletes recordName, and all instances of recordName. It will return an error if
the record does not exist.
record delete instance instanceName
Deletes instance with the name of instanceName. It will return an error if the
instance does not exist. Note that this recursively deletes any nested instances as
well.
RECORD MEMBERS
Record members can either be variables, or other records, However, the same record can not
be nested witin itself (circular). To define a nested record, you need to specify the
record keyword, along the with name of the record, and the name of the instance of that
nested record (within the container). For example, it would look like this:
# this is the nested record
record define mynestedrecord {
nest1
nest2
}
# This is the main record
record define myrecord {
mem1
mem2
{record mynestedrecord mem3}
}
You can also assign default or initial values to the members of a record, by enclosing the
member entry in braces:
record define myrecord {
mem1
{mem2 5}
}
All instances created from this record definition will initially have 5 as the value for
member mem2. If no default is given, then the value will be the empty string.
GETTING VALUES
To get a value of a member, there are several ways to do this.
instanceName cget -member
In this form the built-in cget instance method returns the value of the specified
member. Note the leading dash.
To reach a nested member use dot notation:
instanceName cget -mem3.nest1
instanceName cget -member1 -member2
In this form the built-in cget instance method returns a list containing the values
of both specified members, in the order of specification.
instanceName cget
instanceName configure
instanceName
These forms are all equivalent. They return a dictionary of all members and the
associated values.
SETTING VALUES
To set a value of a member, there are several ways to do this.
instanceName configure -member value
In this form the built-in configure instance method sets the specified member to
the given value. Note the leading dash.
To reach a nested member use dot notation:
instanceName configure -mem3.nest1 value
instanceName configure -member1 value1 -member2 value2
In this form the built-in configure instance method sets all specified members to
the associated values.
ALIAS ACCESS
In the original implementation, access was done by using dot notation similar to how C
structures are accessed. However, there was a concensus to make the interface more Tcl
like, which made sense. However, the original alias access still exists. It might prove
to be helpful to some.
Basically, for every member of every instance, an alias is created. This alias is used to
get and set values for that member. An example will illustrate the point, using the above
defined records:
% # Create an instance first
% myrecord inst1
::inst1
% # To get a member of an instance, just use the alias. It behaves
% # like a Tcl command:
% inst1.mem1
% # To set a member via the alias, just include a value. And optionally
% # the equal sign - syntactic sugar.
% inst1.mem1 = 5
5
% inst1.mem1
5
% # For nested records, just continue with the dot notation.
% # note, no equal sign.
% inst1.mem3.nest1 10
10
% inst1.mem3.nest1
10
% # just the instance by itself gives all member/values pairs for that
% # instance
% inst1
-mem1 5 -mem2 {} -mem3 {-nest1 10 -nest2 {}}
% # and to get all members within the nested record
% inst1.mem3
-nest1 10 -nest2 {}
RECORD COMMAND
The following subcommands and corresponding arguments are available to any record command:
recordName instanceName|#auto ?-member1 value1 -member2 value2 ...?
Using the recordName object command that was created from the record definition,
instances of the record definition can be created. Once an instance is created, it
inherits the members of the record definition, very similar to how objects work.
During instance generation, an object command for the instance is created as well,
using instanceName.
This object command is used to access the data members of the instance. During the
instantiation, while values for that instance may be given, when done, all values
must be given, and be given as key/value pairs, like for method configure. Nested
records have to be in list format.
Optionally, #auto can be used in place of instanceName. When #auto is used, the
instance name will be automatically generated, and of the form recordNameN, where N
is a unique integer (starting at 0) that is generated.
INSTANCE COMMAND
The following subcommands and corresponding arguments are available to any record instance
command:
instanceName cget ?-member1 -member2 ...?
Each instance has the method cget. This is very similar to how Tk widget's cget
command works. It queries the values of the members for that particular instance.
If no arguments are given, then a dictionary is returned.
instanceName configure ?-member1 value1 -member2 value2 ...?
Each instance has the method configure. This is very similar to how Tk widget's
configure command works. It sets the values of the particular members for that
particular instance. If no arguments are given, then a dictionary list is returned.
EXAMPLES
Two examples are provided to give a good illustration on how to use this package.
EXAMPLE 1 - CONTACT INFORMATION
Probably the most obvious example would be to hold contact information, such as addresses,
phone numbers, comments, etc. Since a person can have multiple phone numbers, multiple
email addresses, etc, we will use nested records to define these. So, the first thing we
do is define the nested records:
##
## This is an interactive example, to see what is returned by
## each command as well.
##
% namespace import ::struct::record::*
% # define a nested record. Notice that country has default 'USA'.
% record define locations {
street
street2
city
state
zipcode
{country USA}
phone
}
::locations
% # Define the main record. Notice that it uses the location record twice.
% record define contacts {
first
middle
last
{record locations home}
{record locations work}
}
::contacts
% # Create an instance for the contacts record.
% contacts cont1
::cont1
% # Display some introspection values
% record show records
::contacts ::locations
% #
% record show values cont1
-first {} -middle {} -last {} -home {-street {} -street2 {} -city {} -state {} -zipcode {} -country USA -phone {}} -work {-street {} -street2 {} -city {} -state {} -zipcode {} -country USA -phone {}}
% #
% record show instances contacts
::cont1
% #
% cont1 config
-first {} -middle {} -last {} -home {-street {} -street2 {} -city {} -state {} -zipcode {} -country USA -phone {}} -work {-street {} -street2 {} -city {} -state {} -zipcode {} -country USA -phone {}}
% #
% cont1 cget
-first {} -middle {} -last {} -home {-street {} -street2 {} -city {} -state {} -zipcode {} -country USA -phone {}} -work {-street {} -street2 {} -city {} -state {} -zipcode {} -country USA -phone {}}
% # copy one record to another record
% record define contacts2 [record show members contacts]
::contacts2
% record show members contacts2
first middle last {record locations home} {record locations work}
% record show members contacts
first middle last {record locations home} {record locations work}
%
EXAMPLE 2 - LINKED LIST
This next example just illustrates a simple linked list
% # define a very simple record for linked list
% record define linkedlist {
value
next
}
::linkedlist
% linkedlist lstart
::lstart
% lstart config -value 1 -next [linkedlist #auto]
% [lstart cget -next] config -value 2 -next [linkedlist #auto]
% [[lstart cget -next] cget -next] config -value 3 -next "end"
% set next lstart
lstart
% while 1 {
lappend values [$next cget -value]
set next [$next cget -next]
if {[string match "end" $next]} break
}
% puts "$values"
1 2 3
% # cleanup linked list
% # We could just use delete record linkedlist also
% foreach I [record show instances linkedlist] {
record delete instance $I
}
% record show instances linkedlist
%
BUGS, IDEAS, FEEDBACK
This document, and the package it describes, will undoubtedly contain bugs and other
problems. Please report such in the category struct :: record of the Tcllib Trackers
[http://core.tcl.tk/tcllib/reportlist]. Please also report any ideas for enhancements you
may have for either package and/or documentation.
When proposing code changes, please provide unified diffs, i.e the output of diff -u.
Note further that attachments are strongly preferred over inlined patches. Attachments can
be made by going to the Edit form of the ticket immediately after its creation, and then
using the left-most button in the secondary navigation bar.
KEYWORDS
data structures, record, struct
CATEGORY
Data structures
COPYRIGHT
Copyright (c) 2002, Brett Schwarz <brett_schwarz@yahoo.com>