Provided by: freebsd-manpages_12.2-1_all bug

NAME

     psm — PS/2 mouse style pointing device driver

SYNOPSIS

     options KBD_RESETDELAY=N
     options KBD_MAXWAIT=N
     options PSM_DEBUG=N
     options KBDIO_DEBUG=N
     device psm

     In /boot/device.hints:
     hint.psm.0.at="atkbdc"
     hint.psm.0.irq="12"

DESCRIPTION

     The psm driver provides support for the PS/2 mouse style pointing device.  Currently there
     can be only one psm device node in the system.  As the PS/2 mouse port is located at the
     auxiliary port of the keyboard controller, the keyboard controller driver, atkbdc, must also
     be configured in the kernel.  Note that there is currently no provision of changing the irq
     number.

     Basic PS/2 style pointing device has two or three buttons.  Some devices may have a roller
     or a wheel and/or additional buttons.

   Device Resolution
     The PS/2 style pointing device usually has several grades of resolution, that is,
     sensitivity of movement.  They are typically 25, 50, 100 and 200 pulse per inch.  Some
     devices may have finer resolution.  The current resolution can be changed at runtime.  The
     psm driver allows the user to initially set the resolution via the driver flag (see DRIVER
     CONFIGURATION) or change it later via the ioctl(2) command MOUSE_SETMODE (see IOCTLS).

   Report Rate
     Frequency, or report rate, at which the device sends movement and button state reports to
     the host system is also configurable.  The PS/2 style pointing device typically supports 10,
     20, 40, 60, 80, 100 and 200 reports per second.  60 or 100 appears to be the default value
     for many devices.  Note that when there is no movement and no button has changed its state,
     the device will not send anything to the host system.  The report rate can be changed via an
     ioctl call.

   Operation Levels
     The psm driver has three levels of operation.  The current operation level can be set via an
     ioctl call.

     At the level zero the basic support is provided; the device driver will report horizontal
     and vertical movement of the attached device and state of up to three buttons.  The movement
     and status are encoded in a series of fixed-length data packets (see Data Packet Format).
     This is the default level of operation and the driver is initially at this level when opened
     by the user program.

     The operation level one, the `extended' level, supports a roller (or wheel), if any, and up
     to 11 buttons.  The movement of the roller is reported as movement along the Z axis.  8 byte
     data packets are sent to the user program at this level.

     At the operation level two, data from the pointing device is passed to the user program as
     is.  Conversely, command from the user program is passed to the pointing device as is and
     the user program is responsible for status validation and error recovery.  Modern PS/2 type
     pointing devices often use proprietary data format.  Therefore, the user program is expected
     to have intimate knowledge about the format from a particular device when operating the
     driver at this level.  This level is called `native' level.

   Data Packet Format
     Data packets read from the psm driver are formatted differently at each operation level.

     A data packet from the PS/2 mouse style pointing device is three bytes long at the operation
     level zero:

     Byte 1
             bit 7  One indicates overflow in the vertical movement count.
             bit 6  One indicates overflow in the horizontal movement count.
             bit 5  Set if the vertical movement count is negative.
             bit 4  Set if the horizontal movement count is negative.
             bit 3  Always one.
             bit 2  Middle button status; set if pressed.  For devices without the middle button,
                    this bit is always zero.
             bit 1  Right button status; set if pressed.
             bit 0  Left button status; set if pressed.
     Byte 2  Horizontal movement count in two's complement; -256 through 255.  Note that the sign
             bit is in the first byte.
     Byte 3  Vertical movement count in two's complement; -256 through 255.  Note that the sign
             bit is in the first byte.

     At the level one, a data packet is encoded in the standard format MOUSE_PROTO_SYSMOUSE as
     defined in mouse(4).

     At the level two, native level, there is no standard on the size and format of the data
     packet.

   Acceleration
     The psm driver can somewhat `accelerate' the movement of the pointing device.  The faster
     you move the device, the further the pointer travels on the screen.  The driver has an
     internal variable which governs the effect of the acceleration.  Its value can be modified
     via the driver flag or via an ioctl call.

DRIVER CONFIGURATION

   Kernel Configuration Options
     There are following kernel configuration options to control the psm driver.  They may be set
     in the kernel configuration file (see config(8)).

     KBD_RESETDELAY=X, KBD_MAXWAIT=Y
            The psm driver will attempt to reset the pointing device during the boot process.  It
            sometimes takes a long while before the device will respond after reset.  These
            options control how long the driver should wait before it eventually gives up
            waiting.  The driver will wait X * Y msecs at most.  If the driver seems unable to
            detect your pointing device, you may want to increase these values.  The default
            values are 200 msec for X and 5 for Y.

     PSM_DEBUG=N, KBDIO_DEBUG=N
            Sets the debug level to N.  The default debug level is zero.  See DIAGNOSTICS for
            debug logging.

   Driver Flags
     The psm driver accepts the following driver flags.  Set them in /boot/device.hints (see
     EXAMPLES below).

     bit 0..3 RESOLUTION
            This flag specifies the resolution of the pointing device.  It must be zero through
            four.  The greater the value is, the finer resolution the device will select.  Actual
            resolution selected by this field varies according to the model of the device.
            Typical resolutions are:

            1 (low)            25 pulse per inch (ppi)
            2 (medium low)     50 ppi
            3 (medium high)    100 ppi
            4 (high)           200 ppi

            Leaving this flag zero will selects the default resolution for the device (whatever
            it is).

     bit 4..7 ACCELERATION
            This flag controls the amount of acceleration effect.  The smaller the value of this
            flag is, more sensitive the movement becomes.  The minimum value allowed, thus the
            value for the most sensitive setting, is one.  Setting this flag to zero will
            completely disables the acceleration effect.

     bit 8 NOCHECKSYNC
            The psm driver tries to detect the first byte of the data packet by checking the bit
            pattern of that byte.  Although this method should work with most PS/2 pointing
            devices, it may interfere with some devices which are not so compatible with known
            devices.  If you think your pointing device is not functioning as expected, and the
            kernel frequently prints the following message to the console,

                  psmintr: out of sync (xxxx != yyyy).

            set this flag to disable synchronization check and see if it helps.

     bit 9 NOIDPROBE
            The psm driver will not try to identify the model of the pointing device and will not
            carry out model-specific initialization.  The device should always act like a
            standard PS/2 mouse without such initialization.  Extra features, such as wheels and
            additional buttons, will not be recognized by the psm driver.

     bit 10 NORESET
            When this flag is set, the psm driver will not reset the pointing device when
            initializing the device.  If the FreeBSD kernel is started after another OS has run,
            the pointing device will inherit settings from the previous OS.  However, because
            there is no way for the psm driver to know the settings, the device and the driver
            may not work correctly.  The flag should never be necessary under normal
            circumstances.

     bit 11 FORCETAP
            Some pad devices report as if the fourth button is pressed when the user `taps' the
            surface of the device (see CAVEATS).  This flag will make the psm driver assume that
            the device behaves this way.  Without the flag, the driver will assume this behavior
            for ALPS GlidePoint models only.

     bit 12 IGNOREPORTERROR
            This flag makes psm driver ignore certain error conditions when probing the PS/2
            mouse port.  It should never be necessary under normal circumstances.

     bit 13 HOOKRESUME
            The built-in PS/2 pointing device of some laptop computers is somehow not operable
            immediately after the system `resumes' from the power saving mode, though it will
            eventually become available.  There are reports that stimulating the device by
            performing I/O will help waking up the device quickly.  This flag will enable a piece
            of code in the psm driver to hook the `resume' event and exercise some harmless I/O
            operations on the device.

     bit 14 INITAFTERSUSPEND
            This flag adds more drastic action for the above problem.  It will cause the psm
            driver to reset and re-initialize the pointing device after the `resume' event.

LOADER TUNABLES

     Extended support for Synaptics touchpads can be enabled by setting hw.psm.synaptics_support
     to 1 at boot-time.  This will enable psm to handle packets from guest devices (sticks) and
     extra buttons.  Similarly, extended support for IBM/Lenovo TrackPoint and Elantech touchpads
     can be enabled by setting hw.psm.trackpoint_support or hw.psm.elantech_support,
     respectively, to 1 at boot-time.

     Tap and drag gestures can be disabled by setting hw.psm.tap_enabled to 0 at boot-time.
     Currently, this is supported on Synaptics touchpads regardless of Extended support state and
     on Elantech touchpads with Extended support enabled.  The behaviour may be changed after
     boot by setting the sysctl with the same name and by restarting moused(8) using
     /etc/rc.d/moused.

     Active multiplexing support can be disabled by setting hw.psm.mux_disabled to 1 at boot-
     time.  This will prevent psm from enabling active multiplexing mode needed for some
     Synaptics touchpads.

IOCTLS

     There are a few ioctl(2) commands for mouse drivers.  These commands and related structures
     and constants are defined in <sys/mouse.h>.  General description of the commands is given in
     mouse(4).  This section explains the features specific to the psm driver.

     MOUSE_GETLEVEL int *level
     MOUSE_SETLEVEL int *level
            These commands manipulate the operation level of the psm driver.

     MOUSE_GETHWINFO mousehw_t *hw
            Returns the hardware information of the attached device in the following structure.

            typedef struct mousehw {
                int buttons;    /* number of buttons */
                int iftype;     /* I/F type */
                int type;       /* mouse/track ball/pad... */
                int model;      /* I/F dependent model ID */
                int hwid;       /* I/F dependent hardware ID */
            } mousehw_t;

            The buttons field holds the number of buttons on the device.  The psm driver
            currently can detect the 3 button mouse from Logitech and report accordingly.  The 3
            button mouse from the other manufacturer may or may not be reported correctly.
            However, it will not affect the operation of the driver.

            The iftype is always MOUSE_IF_PS2.

            The type tells the device type: MOUSE_MOUSE, MOUSE_TRACKBALL, MOUSE_STICK, MOUSE_PAD,
            or MOUSE_UNKNOWN.  The user should not heavily rely on this field, as the driver may
            not always, in fact it is very rarely able to, identify the device type.

            The model is always MOUSE_MODEL_GENERIC at the operation level 0.  It may be
            MOUSE_MODEL_GENERIC or one of MOUSE_MODEL_XXX constants at higher operation levels.
            Again the psm driver may or may not set an appropriate value in this field.

            The hwid is the ID value returned by the device.  Known IDs include:

            0    Mouse (Microsoft, Logitech and many other manufacturers)
            2    Microsoft Ballpoint mouse
            3    Microsoft IntelliMouse

     MOUSE_SYN_GETHWINFO synapticshw_t *synhw
            Retrieves extra information associated with Synaptics Touchpad.  Only available when
            a supported device has been detected.

            typedef struct synapticshw {
                int infoMajor;      /* major hardware revision */
                int infoMinor;      /* minor hardware revision */
                int infoRot180;     /* touchpad is rotated */
                int infoPortrait;   /* touchpad is a portrait */
                int infoSensor;     /* sensor model */
                int infoHardware;   /* hardware model */
                int infoNewAbs;     /* supports the newabs format */
                int capPen;         /* can detect a pen */
                int infoSimplC;     /* supports simple commands */
                int infoGeometry;   /* touchpad dimensions */
                int capExtended;    /* supports extended packets */
                int capSleep;       /* can be suspended/resumed */
                int capFourButtons; /* has four buttons */
                int capMultiFinger; /* can detect multiple fingers */
                int capPalmDetect;  /* can detect a palm */
                int capPassthrough; /* can passthrough guest packets */
                int capMiddle;      /* has a physical middle button */
                int nExtendedButtons; /* has N additional buttons */
                int nExtendedQueries; /* supports N extended queries */
            } synapticshw_t;

            See the Synaptics TouchPad Interfacing Guide for more information about the fields in
            this structure.

     MOUSE_GETMODE mousemode_t *mode
            The command gets the current operation parameters of the mouse driver.

            typedef struct mousemode {
                int protocol;    /* MOUSE_PROTO_XXX */
                int rate;        /* report rate (per sec), -1 if unknown */
                int resolution;  /* MOUSE_RES_XXX, -1 if unknown */
                int accelfactor; /* acceleration factor */
                int level;       /* driver operation level */
                int packetsize;  /* the length of the data packet */
                unsigned char syncmask[2]; /* sync. bits */
            } mousemode_t;

            The protocol is MOUSE_PROTO_PS2 at the operation level zero and two.
            MOUSE_PROTO_SYSMOUSE at the operation level one.

            The rate is the status report rate (reports/sec) at which the device will send
            movement report to the host computer.  Typical supported values are 10, 20, 40, 60,
            80, 100 and 200.  Some mice may accept other arbitrary values too.

            The resolution of the pointing device must be one of MOUSE_RES_XXX constants or a
            positive value.  The greater the value is, the finer resolution the mouse will
            select.  Actual resolution selected by the MOUSE_RES_XXX constant varies according to
            the model of mouse.  Typical resolutions are:

            MOUSE_RES_LOW           25 ppi
            MOUSE_RES_MEDIUMLOW     50 ppi
            MOUSE_RES_MEDIUMHIGH    100 ppi
            MOUSE_RES_HIGH          200 ppi

            The accelfactor field holds a value to control acceleration feature (see
            Acceleration).  It must be zero or greater.  If it is zero, acceleration is disabled.

            The packetsize field specifies the length of the data packet.  It depends on the
            operation level and the model of the pointing device.

            level 0    3 bytes
            level 1    8 bytes
            level 2    Depends on the model of the device

            The array syncmask holds a bit mask and pattern to detect the first byte of the data
            packet.  syncmask[0] is the bit mask to be ANDed with a byte.  If the result is equal
            to syncmask[1], the byte is likely to be the first byte of the data packet.  Note
            that this detection method is not 100% reliable, thus, should be taken only as an
            advisory measure.

     MOUSE_SETMODE mousemode_t *mode
            The command changes the current operation parameters of the mouse driver as specified
            in mode.  Only rate, resolution, level and accelfactor may be modifiable.  Setting
            values in the other field does not generate error and has no effect.

            If you do not want to change the current setting of a field, put -1 there.  You may
            also put zero in resolution and rate, and the default value for the fields will be
            selected.

     MOUSE_READDATA mousedata_t *data
     MOUSE_READSTATE mousedata_t *state
            These commands are not currently supported by the psm driver.

     MOUSE_GETSTATUS mousestatus_t *status
            The command returns the current state of buttons and movement counts as described in
            mouse(4).

FILES

     /dev/psm0   `non-blocking' device node
     /dev/bpsm0  `blocking' device node

EXAMPLES

     In order to install the psm driver, you need to add

           device atkbdc
           device psm

     to your kernel configuration file, and put the following lines to /boot/device.hints.

           hint.atkbdc.0.at="isa"
           hint.atkbdc.0.port="0x060"
           hint.psm.0.at="atkbdc"
           hint.psm.0.irq="12"

     If you add the following statement to /boot/device.hints,

           hint.psm.0.flags="0x2000"

     you will add the optional code to stimulate the pointing device after the `resume' event.

           hint.psm.0.flags="0x24"

     The above line will set the device resolution high (4) and the acceleration factor to 2.

DIAGNOSTICS

     At debug level 0, little information is logged except for the following line during boot
     process:

           psm0: device ID X

     where X the device ID code returned by the found pointing device.  See MOUSE_GETINFO for
     known IDs.

     At debug level 1 more information will be logged while the driver probes the auxiliary port
     (mouse port).  Messages are logged with the LOG_KERN facility at the LOG_DEBUG level (see
     syslogd(8)).

           psm0: current command byte:xxxx
           kbdio: TEST_AUX_PORT status:0000
           kbdio: RESET_AUX return code:00fa
           kbdio: RESET_AUX status:00aa
           kbdio: RESET_AUX ID:0000
           [...]
           psm: status 00 02 64
           psm0 irq 12 on isa
           psm0: model AAAA, device ID X, N buttons
           psm0: config:00000www, flags:0000uuuu, packet size:M
           psm0: syncmask:xx, syncbits:yy

     The first line shows the command byte value of the keyboard controller just before the
     auxiliary port is probed.  It usually is 40, 45, 47 or 65, depending on how the motherboard
     BIOS initialized the keyboard controller upon power-up.

     The second line shows the result of the keyboard controller's test on the auxiliary port
     interface, with zero indicating no error; note that some controllers report no error even if
     the port does not exist in the system, however.

     The third through fifth lines show the reset status of the pointing device.  The functioning
     device should return the sequence of FA AA <ID>.  The ID code is described above.

     The seventh line shows the current hardware settings.  These bytes are formatted as follows:

     Byte 1
             bit 7  Reserved.
             bit 6  0 - stream mode, 1 - remote mode.  In the stream mode, the pointing device
                    sends the device status whenever its state changes.  In the remote mode, the
                    host computer must request the status to be sent.  The psm driver puts the
                    device in the stream mode.
             bit 5  Set if the pointing device is currently enabled.  Otherwise zero.
             bit 4  0 - 1:1 scaling, 1 - 2:1 scaling.  1:1 scaling is the default.
             bit 3  Reserved.
             bit 2  Left button status; set if pressed.
             bit 1  Middle button status; set if pressed.
             bit 0  Right button status; set if pressed.
     Byte 2
             bit 7    Reserved.
             bit 6..0
                      Resolution code: zero through three.  Actual resolution for the resolution
                      code varies from one device to another.
     Byte 3  The status report rate (reports/sec) at which the device will send movement report
             to the host computer.

     Note that the pointing device will not be enabled until the psm driver is opened by the user
     program.

     The rest of the lines show the device ID code, the number of detected buttons and internal
     variables.

     At debug level 2, much more detailed information is logged.

SEE ALSO

     ioctl(2), syslog(3), atkbdc(4), mouse(4), mse(4), sysmouse(4), moused(8), syslogd(8)

     Synaptics TouchPad Interfacing Guide, http://www.synaptics.com/.

AUTHORS

     The psm driver is based on the work done by quite a number of people, including Eric
     Forsberg, Sandi Donno, Rick Macklem, Andrew Herbert, Charles Hannum, Shoji Yuen and Kazutaka
     Yokota to name the few.

     This manual page was written by Kazutaka Yokota <yokota@FreeBSD.org>.

CAVEATS

     Many pad devices behave as if the first (left) button were pressed if the user `taps' the
     surface of the pad.  In contrast, some pad products, e.g. some versions of ALPS GlidePoint
     and Interlink VersaPad, treat the tapping action as fourth button events.

     It is reported that ALPS GlidePoint, Synaptics Touchpad, IBM/Lenovo TrackPoint, and
     Interlink VersaPad require INITAFTERSUSPEND flag in order to recover from suspended state.
     This flag is automatically set when one of these devices is detected by the psm driver.

     Some PS/2 mouse models from MouseSystems require to be put in the high resolution mode to
     work properly.  Use the driver flag to set resolution.

     There is not a guaranteed way to re-synchronize with the first byte of the packet once we
     are out of synchronization with the data stream.  However, if you are using the XFree86
     server and experiencing the problem, you may be able to make the X server synchronize with
     the mouse by switching away to a virtual terminal and getting back to the X server, unless
     the X server is accessing the mouse via moused(8).  Clicking any button without moving the
     mouse may also work.

BUGS

     Enabling the extended support for Synaptics touchpads has been reported to cause problems
     with responsivity on some (newer) models of Synaptics hardware, particularly those with
     guest devices.