Provided by: freebsd-manpages_12.2-1_all bug

NAME

     snd_sbc, snd_sb16, snd_sb8 — Creative Sound Blaster ISA and compatible bridge device driver

SYNOPSIS

     To compile this driver into the kernel, place the following lines in your kernel
     configuration file:

           device sound
           device snd_sbc
           device snd_sb16
           device snd_sb8

     Alternatively, to load the driver as a module at boot time, place the following lines in
     loader.conf(5):

           snd_sbc_load="YES"
           snd_sb16_load="YES"
           snd_sb8_load="YES"

     Non-PnP cards require the following lines in device.hints(5):

           hint.sbc.0.at="isa"
           hint.sbc.0.port="0x220"
           hint.sbc.0.irq="5"
           hint.sbc.0.drq="1"
           hint.sbc.0.flags="0x15"

DESCRIPTION

     The snd_sbc bridge driver allows the generic audio driver sound(4) to attach to Creative
     Sound Blaster ISA (mostly SB16 or SB8, known as SoundBlaster Pro) compatible audio cards.

     The value of flags specifies the secondary DMA channel.  If the secondary DMA channel is C,
     set the flags to (C | 0x10).  For a sound card without the secondary DMA channel, the flags
     should be set to zero.

HARDWARE

     The snd_sbc driver supports the following sound cards:

        Avance Asound 110
        Avance Logic ALS100+
        Avance Logic ALS120
        Creative SB16
        Creative SB32
        Creative AWE64
        Creative AWE64 Gold
        Creative ViBRA16C
        Creative ViBRA16X
        ESS ES1681
        ESS ES1688
        ESS ES1868
        ESS ES1869
        ESS ES1878
        ESS ES1879
        ESS ES1888

DIAGNOSTICS

     sb_dspwr(XX) timed out.  A command to the DSP has timed out.  Check the I/O port
     configuration.

     bad irq XX (5/7/9/10 valid)  The IRQ given to the driver is not valid.

SEE ALSO

     sound(4)

HISTORY

     The snd_sbc device driver first appeared in FreeBSD 4.0.

AUTHORS

     Seigo Tanimura <tanimura@r.dl.itc.u-tokyo.ac.jp>