Provided by: xserver-xorg-input-wacom_1.0.0-3ubuntu1_amd64 bug

NAME

       wacom - Wacom input driver

SYNOPSIS

       Section "InputDevice"
         Identifier "idevname"
         Driver "wacom"
         Option "Device"   "devpath"
         ...
       EndSection

DESCRIPTION

       wacom is an X input driver for Wacom devices.

       The wacom driver functions as a pointer input device.

SUPPORTED HARDWARE

       This  driver  supports  the  Wacom IV and Wacom V protocols. Serial tablets only need this
       driver.  USB tablet support is available on some Linux platforms and  requires  the  wacom
       kernel driver being loaded before this driver starts.

       Please  check  https://github.com/linuxwacom  for  latest  updates  of  Wacom X and kernel
       drivers.

DRIVER-INTERNAL DEVICE HOTPLUGGING

       When input device hotplugging in the X server is enabled and no InputDevice section exists
       for  a  compatible  tablet  device and an InputClass section (see xorg.conf.d(5x)) assigns
       this driver for the device, the wacom  driver  creates  multiple  X  devices  for  each  a
       physical  device,  one  X  device  for each available tool. The list of tools is hardware-
       dependent. See Option Type as outlined in the CONFIGURATION DETAILS section.

       These tool-specific devices are referred to as parent device and  dependent  device.   The
       parent  device  is the one presented by the system and the one that causes the X server to
       load the wacom driver. This parent device then causes the automatic  addition  of  several
       dependent  devices.  If the parent device is unplugged or otherwise removed, the dependent
       devices will be automatically removed as well.

       Dependent devices may be assigned  tool-specific  options  through  additional  InputClass
       sections. We recommend that a MatchDriver wacom line is used in these sections in addition
       to the user-specific pattern.

       Match directives are applied by the X server before the driver is selected.  The type name
       of  the  parent device is appended by the driver. It is not possible to use a MatchProduct
       directive to match against this appended type name.

CONFIGURATION DETAILS

       Please refer to xorg.conf(5x) or xorg.conf.d(5x) for general configuration details and for
       options  that  can be used with all input drivers.  This section only covers configuration
       details specific to this driver.

       Multiple instances of the Wacom devices can cohabit. Each device  supports  the  following
       entries:

               Option "Type" "stylus"|"eraser"|"cursor"|"pad"|"touch"
                   sets  the  type  of tool the device represents. This option is mandatory.  The
                   core options, such as "SendCoreEvents" or  "AlwaysCore",  are  unnecessary  in
                   Gimp  if  you  don't  need to move system cursor outside of Gimp drawing area.
                   "pad" is for Intuos 3 or  Cintiq  21UX  tablet  ExpressKeys/menu  strips,  and
                   Graphire  4 or Bamboo tablet buttons, wheel, and/or ring.  It is required  for
                   Intuos3,  CintiqV5, Graphire 4, and  Bamboo  if  you  want  to  use  keystroke
                   features.   "pad"  is  reported as a second tool in the driver. "touch" is for
                   the tablet with touch support.  Right now only a  few  Tablet  PCs  have  this
                   feature.

               Option "Device" "path"
                   sets  the  path  to  the  special  file which represents serial line where the
                   tablet is plugged.  You have to specify it for each subsection with  the  same
                   value  if you want to have multiple devices with the same tablet.  This option
                   is mandatory.

               Option "Suppress" "number"
                   sets the position increment under which not  to  transmit  coordinates.   This
                   entry  must  be  specified  only  in  the  first  Wacom subsection if you have
                   multiple devices for one tablet. If you don't specify this entry, the  default
                   value,   which is 2, will be used. To disable suppression, the entry should be
                   specified as 0.  When suppress is defined,  an event will be sent only when at
                   least one of the following conditions is met:

                           the  change  between  the current X coordinate and the previous one is
                   greater than suppress;

                           the change between the current Y coordinate and the  previous  one  is
                   greater than suppress;

                           the  change  between  the  current  pressure  and  the previous one is
                   greater than suppress;

                           the change between the  current degree of rotation  and  the  previous
                   one of the transducer is greater than suppress;

                           the  change  between the current absolute wheel value and the previous
                   one is equal to or greater than suppress;

                           the change between the current tilt value  and  the  previous  one  is
                   equal to or greater than suppress (if tilt is supported);

                           relative wheel value has changed;

                           button value has changed;

                           proximity has changed.

               Option "Mode" "Relative"|"Absolute"
                   sets  the mode of the device.  The default value for stylus, pad and eraser is
                   Absolute; cursor is Relative; touch defaults  to  Relative  for  tablets  with
                   touch pads and Absolute for touch screens.

               Option "TopX" "number"
                   X coordinate of the top corner of the active zone.  Default to 0.

               Option "TopY" "number"
                   Y coordinate of the top corner of the active zone.  Default to 0.

               Option "BottomX" "number"
                   X coordinate of the bottom corner of the active zone.  Default to width of the
                   tablet.

               Option "BottomY" "number"
                   Y coordinate of the bottom corner of the active zone.  Default  to  height  of
                   the tablet.

               Option "ButtonsOnly" "on"|"off"
                   disables the device's motion events.  Default to off.

               Option "ButtonM" "AC"
                   reports  an  action AC when button M is pressed,  where M is one of the device
                   supported  button numbers,  it can be 1 to 32. Wacom  uses  a  driver-internal
                   button  mapping,  where  any  physical  button  appears to the X server as the
                   button specified by the ButtonM mapping. Hence, if two physical  buttons  have
                   the  same  ButtonM  mapping,  the server will think they are the same physical
                   button.  The default action reported to the X server is mouse button M  click.
                   Because  X  uses  buttons  4,  5,  6,  and 7 as the four scrolling directions,
                   physical buttons 4 and higher are mapped to 8 and  higher  by  default.   Only
                   simple  button  presses  can be configured here; for more complex actions, use
                   xsetwacom(1).  To ignore the button click, i.e.,  to  not  report  any  button
                   click event to the X server,  use "0" or "button 0".

               Option "TPCButton" "on"|"off"
                   enables  the  stylus  buttons  as  Tablet  PC  buttons. If enabled, the stylus
                   reports button events only when its tip is pressed. If  any  button  is  down,
                   pressing the tip reports a button event for the button. Otherwise if no button
                   is down, the tip reports as usual.  Default to "on" for Tablet PCs; "off"  for
                   all other models. Only available on the stylus tool.

               Option "Touch" "on"|"off"
                   enables  touch  events for touch devices,  i.e., system cursor moves when user
                   touches the tablet.  Default to "on" for devices that support touch; "off" for
                   all other models.

               Option "Rotate" "CW"|"CCW"|"HALF"|"NONE"
                   rotates the tablet orientation counterclockwise (CCW) or clockwise (CW) or 180
                   degrees (HALF).   If  you  have  specific  tablet  mappings,  i.e.  TopX/Y  or
                   BottomX/Y were set, the mapping will be applied before rotation. Rotation must
                   be applied to the parent device (usually the stylus), rotation settings on in-
                   driver  hotplugged  devices  (see DRIVER-INTERNAL DEVICE HOTPLUGGING ) will be
                   ignored. The default is "NONE".

               Option "PressCurve" "x1,y1,x2,y2"
                   sets pressure curve by control points x1, y1, x2, and y2.  Their values are in
                   range  from  0..100.  The pressure curve is interpreted as Bezier curve with 4
                   control points, the first and the  last  control  point  being  fixed  on  the
                   coordinates  0/0  and  100/100,  respectively.  The  middle control points are
                   adjustible by this setting and thus define the shape of the curve.  The  input
                   for linear curve (default) is "0,0,100,100"; slightly depressed curve (firmer)
                   might be "5,0,100,95"; slightly raised curve (softer) might  be  "0,5,95,100".
                   The  pressure  curve  is  only applicable to devices of type stylus or eraser,
                   other devices do not honor this setting.

               Option "Pressure2K" "bool"
                   reduces  the  pressure  range  to  the  range  of  0  to  2048  for  backwards
                   compatibility  with  applications that have this range hardcoded.  See section
                   BUGS.  This option should not be  used  unless  the  user  runs  one  or  more
                   applications that rely on a hardcoded pressure range.

               Option "DebugLevel" "number"
                   sets  the  level  of  debugging info for tool-specific messages.  There are 12
                   levels, specified by the integers between 1 and 12.  All debug messages with a
                   level  less  than  or  equal  to the "number" will be logged into the Xorg log
                   file. This option is only available if the driver  was  built  with  debugging
                   support.

               Option "CommonDBG" "number"
                   sets  the  level  of  debugging  info for common (i.e. not tool-specific) code
                   paths on the tablet. There are 12 levels, specified by the integers between  1
                   and  12.  All  debug  messages with a level less than or equal to the "number"
                   will be logged into the Xorg log file. This option is only  available  if  the
                   driver was built with debugging support.

               Option "GrabDevice" "bool"
                   sets  whether  the  underlying  event  device will be grabbed by the driver to
                   prevent the data from leaking to /dev/input/mice. When enabled,  while  the  X
                   server  is  running,  no other programs will be able to read the event stream.
                   Default: "false".

               Option "CursorProx" "number"
                   sets the distance at which  a  relative  tool  is  treated  as  being  out  of
                   proximity.   Beyond  this  distance  the  cursor  will stop responding to tool
                   motion. The default value for pucks is 10 (Intuos Pro) or 42  (Intuos/Bamboo).
                   The default value for pens is 30.

               Option "RawSample" "number"
                   Set   the   sample   window   size  (a  sliding  average  sampling window) for
                   incoming input tool raw data points.  Default:  4, range of 1 to 20.

               Option "Serial" "number"
                   sets the serial number associated with the physical  device.  This  allows  to
                   have  multiple  devices  of the same type (i.e. multiple pens). This option is
                   only available on wacom V devices (Intuos series  and  Cintiq  21U).   To  see
                   which  serial number belongs to a device, you need to run the utility program,
                   xsetwacom, which comes with linuxwacom package.

               Option "ToolSerials" "number[,type[,label]][;...]"
                   sets the list of serial numbered devices that need  to  be  hotplugged  for  a
                   physical  device. The 'type' option may be any of "pen", "airbrush", "artpen",
                   or "cursor".  This option is only available  on  wacom  V  devices  which  are
                   capable  of  reporting  a  serial  number.  To  see  if  a connected device is
                   supported, or to identify which serial number belongs to a device, you need to
                   run  the  utility program, xsetwacom, that comes with this driver. In layman's
                   terms, this option will add additional X devices for this specific tool's  tip
                   (and  eraser,  if  applicable).   This is useful for programs like gimp (which
                   remembers tools based on the X  device)  to  recall  additional  drawing  tool
                   selections for an airbrush+eraser, art pen, extra pen, etc.

               Option "Threshold" "number"
                   sets the pressure threshold used to generate a button 1 events of stylus.  The
                   threshold applies to the normalised pressure range of [0..2048].  The  default
                   is 27.

               Option "Gesture" "bool"
                   Enable  or  disable  multi-finger  in-driver  gesture  support  on the device.
                   Default: off unless the tablet supports multi-touch. Note that disabling  this
                   option  may  allow  the  desktop  environment  to detect multi-finger gestures
                   instead.

               Option "ZoomDistance" "number"
                   If Option "Gesture" is enabled, this option  specifies  the  minimum  movement
                   distance before a zoom gesture is recognized.

               Option "ScrollDistance" "number"
                   If  Option  "Gesture"  is  enabled, this option specifies the minimum movement
                   distance before a scroll gesture is recognized.

               Option "TapTime" "number"
                   If Option "Gesture" is enabled, this option determines the maximum time  of  a
                   touch  event  to  be recognized as tap. A press and release event shorter than
                   TapTime generates button press and release events. Presses longer than TapTime
                   do not generate button events, only motion events.

               Option "PressureRecalibration" "bool"
                   Allows  to  disable  pressure  recalibration.  Default:  true.  If the initial
                   pressure of a device is != 0 the driver recalibrates the pressure range.  This
                   is  to  account for worn out devices.  The downside is that when the user hits
                   the tablet very hard the initial pressure reading may be unequal to zero  even
                   for  a perfectly good pen. If the consecutive pressure readings are not higher
                   than the initial pressure by a threshold no button event  will  be  generated.
                   This option allows to disable the recalibration.

               Option "PanScrollThreshold" "number"
                   Specifies  the  distance  the  pen must move (in tablet units) before a scroll
                   event is generated when using the "pan" action. Smaller  values  will  require
                   less  distance and be more sensitive. Larger values will require more distance
                   and be less sensitive.  Default: 1300 or 2600 depending on  tablet  resolution
                   (corresponds to 13 mm of distance).

TOUCH GESTURES

   Single finger (1FG)
       Left click: tap, actual click happens after TapTime period elapses.

       Left  click  drag:  tap  to select, quickly (within TapTime period) touch selection again.
       Then drag.  Available on touchpads, e.g. BambooPT, not touchscreens.

   Two finger (2FG)
       Right click: one finger down + tap second finger

       Vertical scroll: two fingers side by side (in  any  orientation)  moving  vertically  with
       constant  separation  initiates a vertical scroll.  By driver default a gesture up results
       in a scroll down event (the document moves up) and a gesture down results in a  scroll  up
       event (moving the document down).

       Horizontal  scroll:  two  fingers  side  by  side  held  at  a  constant  distance  moving
       horizontally initiates a horizontal scroll.  A gesture to the left  results  in  a  scroll
       right  event  (the document moves left) and a gesture right results in a scroll left event
       (moving the document right).

       Zoom in: two separated fingers side by side, bring together i.e. pinch.

       Zoom out: two fingers side by side, spread.  Not all applications support zoom.

BUGS

   Pressure range increase leads to unexpected behavior
       In version 0.34, the driver's pressure range increased from 2048 steps to 65536 steps. The
       pressure  axis range is advertised through the X Input Protocol but some applications have
       the previous pressure range hardcoded and cannot handle pressure values above  2048.  This
       is  an application bug but for backwards-compatibility with such applications, this driver
       provides the Pressure2K option to reduce the range to 2048 steps. Note that  this  setting
       applies to the device. Once applied, all applications will see the reduced pressure range.
       It is not possible to provide this setting on a per-application basis.

SEE ALSO

       Xorg(1), xorg.conf(5), xorg.conf.d(5), X(7)

       More information is available at https://github.com/linuxwacom/xf86-input-wacom

AUTHORS

       Peter Hutterer <peter.hutterer@who-t.net>, Ping Cheng <pingc@wacom.com>,  Frederic  Lepied
       <lepied@xfree86.org>,    John    E.    Joganic    <jej@j-arkadia.com>,   Magnus   Vigerlöf
       <Magnus.Vigerlof@ipbo.se>