Provided by: manpages_5.13-1_all 
NAME
core - core dump file
DESCRIPTION
The default action of certain signals is to cause a process to terminate and produce a
core dump file, a file containing an image of the process's memory at the time of
termination. This image can be used in a debugger (e.g., gdb(1)) to inspect the state of
the program at the time that it terminated. A list of the signals which cause a process
to dump core can be found in signal(7).
A process can set its soft RLIMIT_CORE resource limit to place an upper limit on the size
of the core dump file that will be produced if it receives a "core dump" signal; see
getrlimit(2) for details.
There are various circumstances in which a core dump file is not produced:
* The process does not have permission to write the core file. (By default, the core
file is called core or core.pid, where pid is the ID of the process that dumped core,
and is created in the current working directory. See below for details on naming.)
Writing the core file fails if the directory in which it is to be created is not
writable, or if a file with the same name exists and is not writable or is not a
regular file (e.g., it is a directory or a symbolic link).
* A (writable, regular) file with the same name as would be used for the core dump
already exists, but there is more than one hard link to that file.
* The filesystem where the core dump file would be created is full; or has run out of
inodes; or is mounted read-only; or the user has reached their quota for the
filesystem.
* The directory in which the core dump file is to be created does not exist.
* The RLIMIT_CORE (core file size) or RLIMIT_FSIZE (file size) resource limits for the
process are set to zero; see getrlimit(2) and the documentation of the shell's ulimit
command (limit in csh(1)).
* The binary being executed by the process does not have read permission enabled. (This
is a security measure to ensure that an executable whose contents are not readable does
not produce a—possibly readable—core dump containing an image of the executable.)
* The process is executing a set-user-ID (set-group-ID) program that is owned by a user
(group) other than the real user (group) ID of the process, or the process is executing
a program that has file capabilities (see capabilities(7)). (However, see the
description of the prctl(2) PR_SET_DUMPABLE operation, and the description of the
/proc/sys/fs/suid_dumpable file in proc(5).)
* /proc/sys/kernel/core_pattern is empty and /proc/sys/kernel/core_uses_pid contains the
value 0. (These files are described below.) Note that if
/proc/sys/kernel/core_pattern is empty and /proc/sys/kernel/core_uses_pid contains the
value 1, core dump files will have names of the form .pid, and such files are hidden
unless one uses the ls(1) -a option.
* (Since Linux 3.7) The kernel was configured without the CONFIG_COREDUMP option.
In addition, a core dump may exclude part of the address space of the process if the
madvise(2) MADV_DONTDUMP flag was employed.
On systems that employ systemd(1) as the init framework, core dumps may instead be placed
in a location determined by systemd(1). See below for further details.
Naming of core dump files
By default, a core dump file is named core, but the /proc/sys/kernel/core_pattern file
(since Linux 2.6 and 2.4.21) can be set to define a template that is used to name core
dump files. The template can contain % specifiers which are substituted by the following
values when a core file is created:
%% A single % character.
%c Core file size soft resource limit of crashing process (since Linux 2.6.24).
%d Dump mode—same as value returned by prctl(2) PR_GET_DUMPABLE (since Linux 3.7).
%e The process or thread's comm value, which typically is the same as the executable
filename (without path prefix, and truncated to a maximum of 15 characters), but
may have been modified to be something different; see the discussion of
/proc/[pid]/comm and /proc/[pid]/task/[tid]/comm in proc(5).
%E Pathname of executable, with slashes ('/') replaced by exclamation marks ('!')
(since Linux 3.0).
%g Numeric real GID of dumped process.
%h Hostname (same as nodename returned by uname(2)).
%i TID of thread that triggered core dump, as seen in the PID namespace in which the
thread resides (since Linux 3.18).
%I TID of thread that triggered core dump, as seen in the initial PID namespace
(since Linux 3.18).
%p PID of dumped process, as seen in the PID namespace in which the process resides.
%P PID of dumped process, as seen in the initial PID namespace (since Linux 3.12).
%s Number of signal causing dump.
%t Time of dump, expressed as seconds since the Epoch, 1970-01-01 00:00:00 +0000
(UTC).
%u Numeric real UID of dumped process.
A single % at the end of the template is dropped from the core filename, as is the
combination of a % followed by any character other than those listed above. All other
characters in the template become a literal part of the core filename. The template may
include '/' characters, which are interpreted as delimiters for directory names. The
maximum size of the resulting core filename is 128 bytes (64 bytes in kernels before
2.6.19). The default value in this file is "core". For backward compatibility, if
/proc/sys/kernel/core_pattern does not include %p and /proc/sys/kernel/core_uses_pid (see
below) is nonzero, then .PID will be appended to the core filename.
Paths are interpreted according to the settings that are active for the crashing process.
That means the crashing process's mount namespace (see mount_namespaces(7)), its current
working directory (found via getcwd(2)), and its root directory (see chroot(2)).
Since version 2.4, Linux has also provided a more primitive method of controlling the name
of the core dump file. If the /proc/sys/kernel/core_uses_pid file contains the value 0,
then a core dump file is simply named core. If this file contains a nonzero value, then
the core dump file includes the process ID in a name of the form core.PID.
Since Linux 3.6, if /proc/sys/fs/suid_dumpable is set to 2 ("suidsafe"), the pattern must
be either an absolute pathname (starting with a leading '/' character) or a pipe, as
defined below.
Piping core dumps to a program
Since kernel 2.6.19, Linux supports an alternate syntax for the
/proc/sys/kernel/core_pattern file. If the first character of this file is a pipe symbol
(|), then the remainder of the line is interpreted as the command-line for a user-space
program (or script) that is to be executed.
Since kernel 5.3.0, the pipe template is split on spaces into an argument list before the
template parameters are expanded. In earlier kernels, the template parameters are
expanded first and the resulting string is split on spaces into an argument list. This
means that in earlier kernels executable names added by the %e and %E template parameters
could get split into multiple arguments. So the core dump handler needs to put the
executable names as the last argument and ensure it joins all parts of the executable name
using spaces. Executable names with multiple spaces in them are not correctly represented
in earlier kernels, meaning that the core dump handler needs to use mechanisms to find the
executable name.
Instead of being written to a file, the core dump is given as standard input to the
program. Note the following points:
* The program must be specified using an absolute pathname (or a pathname relative to the
root directory, /), and must immediately follow the '|' character.
* The command-line arguments can include any of the % specifiers listed above. For
example, to pass the PID of the process that is being dumped, specify %p in an
argument.
* The process created to run the program runs as user and group root.
* Running as root does not confer any exceptional security bypasses. Namely, LSMs (e.g.,
SELinux) are still active and may prevent the handler from accessing details about the
crashed process via /proc/[pid].
* The program pathname is interpreted with respect to the initial mount namespace as it
is always executed there. It is not affected by the settings (e.g., root directory,
mount namespace, current working directory) of the crashing process.
* The process runs in the initial namespaces (PID, mount, user, and so on) and not in the
namespaces of the crashing process. One can utilize specifiers such as %P to find the
right /proc/[pid] directory and probe/enter the crashing process's namespaces if
needed.
* The process starts with its current working directory as the root directory. If
desired, it is possible change to the working directory of the dumping process by
employing the value provided by the %P specifier to change to the location of the
dumping process via /proc/[pid]/cwd.
* Command-line arguments can be supplied to the program (since Linux 2.6.24), delimited
by white space (up to a total line length of 128 bytes).
* The RLIMIT_CORE limit is not enforced for core dumps that are piped to a program via
this mechanism.
/proc/sys/kernel/core_pipe_limit
When collecting core dumps via a pipe to a user-space program, it can be useful for the
collecting program to gather data about the crashing process from that process's
/proc/[pid] directory. In order to do this safely, the kernel must wait for the program
collecting the core dump to exit, so as not to remove the crashing process's /proc/[pid]
files prematurely. This in turn creates the possibility that a misbehaving collecting
program can block the reaping of a crashed process by simply never exiting.
Since Linux 2.6.32, the /proc/sys/kernel/core_pipe_limit can be used to defend against
this possibility. The value in this file defines how many concurrent crashing processes
may be piped to user-space programs in parallel. If this value is exceeded, then those
crashing processes above this value are noted in the kernel log and their core dumps are
skipped.
A value of 0 in this file is special. It indicates that unlimited processes may be
captured in parallel, but that no waiting will take place (i.e., the collecting program is
not guaranteed access to /proc/<crashing-PID>). The default value for this file is 0.
Controlling which mappings are written to the core dump
Since kernel 2.6.23, the Linux-specific /proc/[pid]/coredump_filter file can be used to
control which memory segments are written to the core dump file in the event that a core
dump is performed for the process with the corresponding process ID.
The value in the file is a bit mask of memory mapping types (see mmap(2)). If a bit is
set in the mask, then memory mappings of the corresponding type are dumped; otherwise they
are not dumped. The bits in this file have the following meanings:
bit 0 Dump anonymous private mappings.
bit 1 Dump anonymous shared mappings.
bit 2 Dump file-backed private mappings.
bit 3 Dump file-backed shared mappings.
bit 4 (since Linux 2.6.24)
Dump ELF headers.
bit 5 (since Linux 2.6.28)
Dump private huge pages.
bit 6 (since Linux 2.6.28)
Dump shared huge pages.
bit 7 (since Linux 4.4)
Dump private DAX pages.
bit 8 (since Linux 4.4)
Dump shared DAX pages.
By default, the following bits are set: 0, 1, 4 (if the
CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS kernel configuration option is enabled), and 5. This
default can be modified at boot time using the coredump_filter boot option.
The value of this file is displayed in hexadecimal. (The default value is thus displayed
as 33.)
Memory-mapped I/O pages such as frame buffer are never dumped, and virtual DSO (vdso(7))
pages are always dumped, regardless of the coredump_filter value.
A child process created via fork(2) inherits its parent's coredump_filter value; the
coredump_filter value is preserved across an execve(2).
It can be useful to set coredump_filter in the parent shell before running a program, for
example:
$ echo 0x7 > /proc/self/coredump_filter
$ ./some_program
This file is provided only if the kernel was built with the CONFIG_ELF_CORE configuration
option.
Core dumps and systemd
On systems using the systemd(1) init framework, core dumps may be placed in a location
determined by systemd(1). To do this, systemd(1) employs the core_pattern feature that
allows piping core dumps to a program. One can verify this by checking whether core dumps
are being piped to the systemd-coredump(8) program:
$ cat /proc/sys/kernel/core_pattern
|/usr/lib/systemd/systemd-coredump %P %u %g %s %t %c %e
In this case, core dumps will be placed in the location configured for
systemd-coredump(8), typically as lz4(1) compressed files in the directory
/var/lib/systemd/coredump/. One can list the core dumps that have been recorded by
systemd-coredump(8) using coredumpctl(1):
$ coredumpctl list | tail -5
Wed 2017-10-11 22:25:30 CEST 2748 1000 1000 3 present /usr/bin/sleep
Thu 2017-10-12 06:29:10 CEST 2716 1000 1000 3 present /usr/bin/sleep
Thu 2017-10-12 06:30:50 CEST 2767 1000 1000 3 present /usr/bin/sleep
Thu 2017-10-12 06:37:40 CEST 2918 1000 1000 3 present /usr/bin/cat
Thu 2017-10-12 08:13:07 CEST 2955 1000 1000 3 present /usr/bin/cat
The information shown for each core dump includes the date and time of the dump, the PID,
UID, and GID of the dumping process, the signal number that caused the core dump, and the
pathname of the executable that was being run by the dumped process. Various options to
coredumpctl(1) allow a specified coredump file to be pulled from the systemd(1) location
into a specified file. For example, to extract the core dump for PID 2955 shown above to
a file named core in the current directory, one could use:
$ coredumpctl dump 2955 -o core
For more extensive details, see the coredumpctl(1) manual page.
To (persistently) disable the systemd(1) mechanism that archives core dumps, restoring to
something more like traditional Linux behavior, one can set an override for the systemd(1)
mechanism, using something like:
# echo "kernel.core_pattern=core.%p" > \
/etc/sysctl.d/50-coredump.conf
# /lib/systemd/systemd-sysctl
It is also possible to temporarily (i.e., until the next reboot) change the core_pattern
setting using a command such as the following (which causes the names of core dump files
to include the executable name as well as the number of the signal which triggered the
core dump):
# sysctl -w kernel.core_pattern="%e-%s.core"
NOTES
The gdb(1) gcore command can be used to obtain a core dump of a running process.
In Linux versions up to and including 2.6.27, if a multithreaded process (or, more
precisely, a process that shares its memory with another process by being created with the
CLONE_VM flag of clone(2)) dumps core, then the process ID is always appended to the core
filename, unless the process ID was already included elsewhere in the filename via a %p
specification in /proc/sys/kernel/core_pattern. (This is primarily useful when employing
the obsolete LinuxThreads implementation, where each thread of a process has a different
PID.)
EXAMPLES
The program below can be used to demonstrate the use of the pipe syntax in the
/proc/sys/kernel/core_pattern file. The following shell session demonstrates the use of
this program (compiled to create an executable named core_pattern_pipe_test):
$ cc -o core_pattern_pipe_test core_pattern_pipe_test.c
$ su
Password:
# echo "|$PWD/core_pattern_pipe_test %p UID=%u GID=%g sig=%s" > \
/proc/sys/kernel/core_pattern
# exit
$ sleep 100
^\ # type control-backslash
Quit (core dumped)
$ cat core.info
argc=5
argc[0]=</home/mtk/core_pattern_pipe_test>
argc[1]=<20575>
argc[2]=<UID=1000>
argc[3]=<GID=100>
argc[4]=<sig=3>
Total bytes in core dump: 282624
Program source
/* core_pattern_pipe_test.c */
#define _GNU_SOURCE
#include <sys/stat.h>
#include <fcntl.h>
#include <limits.h>
#include <stdio.h>
#include <stdlib.h>
#include <unistd.h>
#define BUF_SIZE 1024
int
main(int argc, char *argv[])
{
ssize_t nread, tot;
char buf[BUF_SIZE];
FILE *fp;
char cwd[PATH_MAX];
/* Change our current working directory to that of the
crashing process. */
snprintf(cwd, PATH_MAX, "/proc/%s/cwd", argv[1]);
chdir(cwd);
/* Write output to file "core.info" in that directory. */
fp = fopen("core.info", "w+");
if (fp == NULL)
exit(EXIT_FAILURE);
/* Display command-line arguments given to core_pattern
pipe program. */
fprintf(fp, "argc=%d\n", argc);
for (int j = 0; j < argc; j++)
fprintf(fp, "argc[%d]=<%s>\n", j, argv[j]);
/* Count bytes in standard input (the core dump). */
tot = 0;
while ((nread = read(STDIN_FILENO, buf, BUF_SIZE)) > 0)
tot += nread;
fprintf(fp, "Total bytes in core dump: %zd\n", tot);
fclose(fp);
exit(EXIT_SUCCESS);
}
SEE ALSO
bash(1), coredumpctl(1), gdb(1), getrlimit(2), mmap(2), prctl(2), sigaction(2), elf(5),
proc(5), pthreads(7), signal(7), systemd-coredump(8)
COLOPHON
This page is part of release 5.13 of the Linux man-pages project. A description of the
project, information about reporting bugs, and the latest version of this page, can be
found at https://www.kernel.org/doc/man-pages/.