Provided by: gimp-data_2.10.32-1build1_all bug

NAME

       gimprc - gimp configuration file

DESCRIPTION

       The  gimprc file is a configuration file read by GIMP when it starts up.  There are two of
       these:   one   system-wide   one   stored   in   /etc/gimp/2.0/gimprc   and   a   per-user
       $XDG_CONFIG_HOME/GIMP/2.10/gimprc which may override system settings.

       Comments are introduced by a hash sign (#), and continue until the end of the line.  Blank
       lines are ignored.

       The gimprc file associates values with properties.  These properties may be set  by  lisp-
       like assignments of the form:

              (property-name value)

       where:

       property-name
                 is one of the property names described below.

       value     is the value the property is to be set to.

       Either spaces or tabs may be used to separate the name from the value.

PROPERTIES

       Valid properties and their default values are:

       (temp-path "${gimp_temp_dir}")

              Sets  the folder for temporary storage. Files will appear here during the course of
              running GIMP.  Most files will disappear when GIMP exits, but some files are likely
              to  remain,  so it is best if this folder not be one that is shared by other users.
              This is a single folder.

       (swap-path "${gimp_cache_dir}")

              Sets the swap file location. GIMP uses a tile based memory allocation scheme.   The
              swap  file  is  used  to  quickly and easily swap tiles out to disk and back in. Be
              aware that the swap file can easily get very large  if  GIMP  is  used  with  large
              images.  Also, things can get horribly slow if the swap file is created on a folder
              that is mounted over NFS.  For these reasons, it may be desirable to put your  swap
              file in "/tmp".  This is a single folder.

       (swap-compression "fast")

              The  compression  method  used  for  tile  data stored in the swap file.  This is a
              string value.

       (num-processors 1)

              Sets how many threads GIMP should use for operations that support it.  This  is  an
              integer value.

       (tile-cache-size 2g)

              When  the amount of pixel data exceeds this limit, GIMP will start to swap tiles to
              disk.  This is a lot slower but it  makes  it  possible  to  work  on  images  that
              wouldn't  fit into memory otherwise.  If you have a lot of RAM, you may want to set
              this to a higher value.  The integer size can contain a suffix of 'B', 'K', 'M'  or
              'G'  which  makes  GIMP  interpret the size as being specified in bytes, kilobytes,
              megabytes or gigabytes. If no suffix  is  specified  the  size  defaults  to  being
              specified in kilobytes.

       (use-opencl no)

              When enabled, uses OpenCL for some operations.  Possible values are yes and no.

       Specifies the language to use for the user interface.  This is a string value.

       (interpolation-type cubic)

              Sets  the  level  of  interpolation  used  for  scaling  and other transformations.
              Possible values are none, linear, cubic, nohalo and lohalo.

       (default-threshold 15)

              Tools such as fuzzy-select and bucket  fill  find  regions  based  on  a  seed-fill
              algorithm.   The seed fill starts at the initially selected pixel and progresses in
              all directions until the difference of pixel intensity from the original is greater
              than  a  specified threshold. This value represents the default threshold.  This is
              an integer value.

       (plug-in-path "${gimp_dir}/plug-ins:${gimp_plug_in_dir}/plug-ins")

              Sets the plug-in search path.  This is a colon-separated list of folders to search.

       (module-path "${gimp_dir}/modules:${gimp_plug_in_dir}/modules")

              Sets the module search path.  This is a colon-separated list of folders to search.

       (interpreter-path "${gimp_dir}/interpreters:${gimp_plug_in_dir}/interpreters")

              Sets the interpreter search path.  This is a colon-separated  list  of  folders  to
              search.

       (environ-path "${gimp_dir}/environ:${gimp_plug_in_dir}/environ")

              Sets the environ search path.  This is a colon-separated list of folders to search.

       (brush-path "${gimp_dir}/brushes:${gimp_data_dir}/brushes")

              Sets the brush search path.  This is a colon-separated list of folders to search.

       (brush-path-writable "${gimp_dir}/brushes")

              This is a colon-separated list of folders to search.

       (dynamics-path "${gimp_dir}/dynamics:${gimp_data_dir}/dynamics")

              Sets  the  dynamics  search  path.   This  is  a colon-separated list of folders to
              search.

       (dynamics-path-writable "${gimp_dir}/dynamics")

              This is a colon-separated list of folders to search.

       (mypaint-brush-path "/usr/share/mypaint-data/1.0/brushes:~/.mypaint/brushes")

              Sets the brush search path.  This is a colon-separated list of folders to search.

       (mypaint-brush-path-writable "~/.mypaint/brushes")

              This is a colon-separated list of folders to search.

       (pattern-path "${gimp_dir}/patterns:${gimp_data_dir}/patterns")

              Sets the pattern search path.  This is a colon-separated list of folders to search.

       (pattern-path-writable "${gimp_dir}/patterns")

              This is a colon-separated list of folders to search.

       (palette-path "${gimp_dir}/palettes:${gimp_data_dir}/palettes")

              Sets the palette search path.  This is a colon-separated list of folders to search.

       (palette-path-writable "${gimp_dir}/palettes")

              This is a colon-separated list of folders to search.

       (gradient-path "${gimp_dir}/gradients:${gimp_data_dir}/gradients")

              Sets the gradient search path.  This  is  a  colon-separated  list  of  folders  to
              search.

       (gradient-path-writable "${gimp_dir}/gradients")

              This is a colon-separated list of folders to search.

       (tool-preset-path "${gimp_dir}/tool-presets:${gimp_data_dir}/tool-presets")

              Sets  the  dynamics  search  path.   This  is  a colon-separated list of folders to
              search.

       (tool-preset-path-writable "${gimp_dir}/tool-presets")

              This is a colon-separated list of folders to search.

       (font-path "${gimp_dir}/fonts:${gimp_data_dir}/fonts")

              Where to look for fonts in addition to the system-wide installed fonts.  This is  a
              colon-separated list of folders to search.

       (default-brush "2. Hardness 050")

              Specify  a  default  brush.  The brush is searched for in the specified brush path.
              This is a string value.

       (default-dynamics "Dynamics Off")

              Specify a default dynamics.  The dynamics is searched for in the specified dynamics
              path.  This is a string value.

       (default-mypaint-brush "Fixme")

              Specify a default MyPaint brush.  This is a string value.

       (default-pattern "Pine")

              Specify a default pattern.  This is a string value.

       (default-palette "Default")

              Specify a default palette.  This is a string value.

       (default-gradient "FG to BG (RGB)")

              Specify a default gradient.  This is a string value.

       (default-tool-preset "Current Options")

              Specify  a  default  tool preset.  The tool preset is searched for in the specified
              tool prests path.  This is a string value.

       (default-font "Sans-serif")

              Specify a default font.  This is a string value.

       (global-brush yes)

              When enabled, the selected brush will be used for all tools.  Possible  values  are
              yes and no.

       (global-dynamics yes)

              When  enabled,  the  selected dynamics will be used for all tools.  Possible values
              are yes and no.

       (global-pattern yes)

              When enabled, the selected pattern will be used for all tools.  Possible values are
              yes and no.

       (global-palette yes)

              When enabled, the selected palette will be used for all tools.  Possible values are
              yes and no.

       (global-gradient yes)

              When enabled, the selected gradient will be used for all  tools.   Possible  values
              are yes and no.

       (global-font yes)

              When  enabled,  the  selected font will be used for all tools.  Possible values are
              yes and no.

       (default-image
                  (width 1920)
                  (height 1080)
                  (unit pixels)
                  (xresolution 300)
                  (yresolution 300)
                  (resolution-unit inches)
                  (image-type rgb)
                  (precision u8-gamma)
                  (color-managed yes)
                  (color-profile NULL)
                  (fill-type background)
                  (comment "Created with GIMP"))

              Sets the default image in the "File/New" dialog.  This is a parameter list.

       (default-grid
                  (style solid)
                  (fgcolor (color-rgba 0 0 0 1))
                  (bgcolor (color-rgba 1 1 1 1))
                  (xspacing 10)
                  (yspacing 10)
                  (spacing-unit inches)
                  (xoffset 0)
                  (yoffset 0)
                  (offset-unit inches))

              Specify a default image grid.  This is a parameter list.

       (undo-levels 5)

              Sets the minimal number of operations that can be undone. More undo levels are kept
              available until the undo-size limit is reached.  This is an integer value.

       (undo-size 1g)

              Sets  an upper limit to the memory that is used per image to keep operations on the
              undo stack. Regardless of this setting, at least as many undo-levels as  configured
              can be undone.  The integer size can contain a suffix of 'B', 'K', 'M' or 'G' which
              makes GIMP interpret the size as being specified in bytes, kilobytes, megabytes  or
              gigabytes.  If  no  suffix  is  specified  the  size defaults to being specified in
              kilobytes.

       (undo-preview-size large)

              Sets the size of the previews in the  Undo  History.   Possible  values  are  tiny,
              extra-small, small, medium, large, extra-large, huge, enormous and gigantic.

       (plug-in-history-size 10)

              How  many  recently used filters and plug-ins to keep on the Filters menu.  This is
              an integer value.

       (pluginrc-path "${gimp_dir}/pluginrc")

              Sets the pluginrc search path.  This is a single filename.

       (layer-previews yes)

              Sets whether GIMP should create previews of layers and channels.  Previews  in  the
              layers  and  channels  dialog  are  nice to have but they can slow things down when
              working with large images.  Possible values are yes and no.

       (group-layer-previews yes)

              Sets whether GIMP should create previews of layer groups. Layer group previews  are
              more expensive than ordinary layer previews.  Possible values are yes and no.

       (layer-preview-size medium)

              Sets  the  preview  size  used  for  layers  and  channel previews in newly created
              dialogs.  Possible values are tiny, extra-small, small, medium, large, extra-large,
              huge, enormous and gigantic.

       (thumbnail-size normal)

              Sets the size of the thumbnail shown in the Open dialog.  Possible values are none,
              normal and large.

       (thumbnail-filesize-limit 4M)

              The thumbnail in the Open dialog will be automatically updated if  the  file  being
              previewed is smaller than the size set here.  The integer size can contain a suffix
              of 'B', 'K', 'M' or 'G' which makes GIMP interpret the size as being  specified  in
              bytes,  kilobytes,  megabytes  or  gigabytes.  If  no  suffix is specified the size
              defaults to being specified in kilobytes.

       (color-management
                  (mode display)
                  (display-profile-from-gdk no)
                  (display-rendering-intent relative-colorimetric)
                  (display-use-black-point-compensation yes)
                  (display-optimize yes)
                  (simulation-rendering-intent perceptual)
                  (simulation-use-black-point-compensation no)
                  (simulation-optimize yes)
                  (simulation-gamut-check no)
                  (out-of-gamut-color (color-rgb 1 0 1))
                  (display-module "CdisplayLcms"))

              Defines the color management behavior.  This is a parameter list.

       (save-document-history yes)

              Keep a permanent record of all opened and saved files in the Recent Documents list.
              Possible values are yes and no.

       (quick-mask-color (color-rgba 1 0 0 0.5))

              Sets  the default quick mask color.  The color is specified in the form (color-rgba
              red green blue alpha) with channel values as floats in the range of 0.0 to 1.0.

       (import-promote-float no)

              Promote imported images to floating point precision.  Does  not  apply  to  indexed
              images.  Possible values are yes and no.

       (import-promote-dither yes)

              When  promoting imported images to floating point precision, also add minimal noise
              in order to distribute color values a bit.  Possible values are yes and no.

       (import-add-alpha no)

              Add an alpha channel to all layers of imported images.  Possible values are yes and
              no.

       (import-raw-plug-in "")

              Which  plug-in  to  use  for  importing raw digital camera files.  This is a single
              filename.

       (export-file-type png)

              Export file type used by default.  Possible values are png,  jpg,  ora,  psd,  pdf,
              tif, bmp and webp.

       (export-color-profile yes)

              Export the image's color profile by default.  Possible values are yes and no.

       (export-metadata-exif yes)

              Export Exif metadata by default.  Possible values are yes and no.

       (export-metadata-xmp yes)

              Export XMP metadata by default.  Possible values are yes and no.

       (export-metadata-iptc yes)

              Export IPTC metadata by default.  Possible values are yes and no.

       (debug-policy fatal)

              Try  generating debug data for bug reporting when appropriate.  Possible values are
              warning, critical, fatal and never.

       (check-updates yes)

              Check for  availability  of  GIMP  updates  through  background  internet  queries.
              Possible values are yes and no.

       (check-update-timestamp 0)

              Timestamp of the last update check.  (null)

       (last-release-timestamp 0)

              The timestamp for the last known release date.  (null)

       The last known release version of GIMP as queried from official website.  This
              is a string value.

       (last-revision 0)

              The timestamp for the last known release date.  This is an integer value.

       The last known release version of GIMP as queried from official website.  This
              is a string value.

       (transparency-size medium-checks)

              Sets  the  size  of the checkerboard used to display transparency.  Possible values
              are small-checks, medium-checks and large-checks.

       (transparency-type gray-checks)

              Sets the manner in which transparency is displayed in images.  Possible values  are
              light-checks, gray-checks, dark-checks, white-only, gray-only and black-only.

       (snap-distance 8)

              This is the distance in pixels where Guide and Grid snapping activates.  This is an
              integer value.

       (marching-ants-speed 200)

              Speed of marching ants in the selection outline.  This  value  is  in  milliseconds
              (less time indicates faster marching).  This is an integer value.

       (resize-windows-on-zoom no)

              When  enabled,  the image window will automatically resize itself when zooming into
              and out of images. This setting only takes effect in multi-window  mode.   Possible
              values are yes and no.

       (resize-windows-on-resize no)

              When  enabled,  the  image  window  will  automatically  resize itself whenever the
              physical image size changes. This setting only takes effect in  multi-window  mode.
              Possible values are yes and no.

       (default-show-all no)

              Show full image content by default.  Possible values are yes and no.

       (default-dot-for-dot yes)

              When  enabled,  this will ensure that each pixel of an image gets mapped to a pixel
              on the screen.  Possible values are yes and no.

       (initial-zoom-to-fit yes)

              When enabled, this will ensure that the full image  is  visible  after  a  file  is
              opened,  otherwise  it  will be displayed with a scale of 1:1.  Possible values are
              yes and no.

       (cursor-mode tool-crosshair)

              Sets the type of mouse pointers to  use.   Possible  values  are  tool-icon,  tool-
              crosshair and crosshair.

       (cursor-updating yes)

              Context-dependent  mouse  pointers  are  helpful.   They  are  enabled  by default.
              However, they require overhead that you may want to do  without.   Possible  values
              are yes and no.

       (show-brush-outline yes)

              When  enabled,  all paint tools will show a preview of the current brush's outline.
              Possible values are yes and no.

       (snap-brush-outline no)

              When enabled, the brush outline  will  snap  to  individual  dabs  while  painting.
              Possible values are yes and no.

       (show-paint-tool-cursor yes)

              When  enabled,  the  mouse pointer will be shown over the image while using a paint
              tool.  Possible values are yes and no.

       (image-title-format "%D*%f-%p.%i (%t, %o, %L) %wx%h")

              Sets the text to appear in image window titles.  This is a format string; certain %
              character sequences are recognised and expanded as follows:

              %%  literal percent sign
              %f  bare filename, or "Untitled"
              %F  full path to file, or "Untitled"
              %p  PDB image id
              %i  view instance number
              %t  image type (RGB, grayscale, indexed)
              %z  zoom factor as a percentage
              %s  source scale factor
              %d  destination scale factor
              %Dx expands to x if the image is dirty, the empty string otherwise
              %Cx expands to x if the image is clean, the empty string otherwise
              %B  expands to (modified) if the image is dirty, the empty string otherwise
              %A  expands to (clean) if the image is clean, the empty string otherwise
              %Nx expands to x if the image is export-dirty, the empty string otherwise
              %Ex expands to x if the image is export-clean, the empty string otherwise
              %l  the number of layers
              %L  the number of layers (long form)
              %m  memory used by the image
              %n  the name of the active layer/channel
              %P  the PDB id of the active layer/channel
              %w  image width in pixels
              %W  image width in real-world units
              %h  image height in pixels
              %H  image height in real-world units
              %M  the image size expressed in megapixels
              %u  unit symbol
              %U  unit abbreviation
              %x  the width of the active layer/channel in pixels
              %X  the width of the active layer/channel in real-world units
              %y  the height of the active layer/channel in pixels
              %Y  the height of the active layer/channel in real-world units
              %o  the name of the image's color profile

       (image-status-format "%n (%m)")

              Sets  the  text  to  appear  in image window status bars.  This is a format string;
              certain % character sequences are recognised and expanded as follows:

              %%  literal percent sign
              %f  bare filename, or "Untitled"
              %F  full path to file, or "Untitled"
              %p  PDB image id
              %i  view instance number
              %t  image type (RGB, grayscale, indexed)
              %z  zoom factor as a percentage
              %s  source scale factor
              %d  destination scale factor
              %Dx expands to x if the image is dirty, the empty string otherwise
              %Cx expands to x if the image is clean, the empty string otherwise
              %B  expands to (modified) if the image is dirty, the empty string otherwise
              %A  expands to (clean) if the image is clean, the empty string otherwise
              %Nx expands to x if the image is export-dirty, the empty string otherwise
              %Ex expands to x if the image is export-clean, the empty string otherwise
              %l  the number of layers
              %L  the number of layers (long form)
              %m  memory used by the image
              %n  the name of the active layer/channel
              %P  the PDB id of the active layer/channel
              %w  image width in pixels
              %W  image width in real-world units
              %h  image height in pixels
              %H  image height in real-world units
              %M  the image size expressed in megapixels
              %u  unit symbol
              %U  unit abbreviation
              %x  the width of the active layer/channel in pixels
              %X  the width of the active layer/channel in real-world units
              %y  the height of the active layer/channel in pixels
              %Y  the height of the active layer/channel in real-world units
              %o  the name of the image's color profile

       (monitor-xresolution 96)

              Sets the monitor's horizontal resolution, in dots per inch.  If set  to  0,  forces
              the X server to be queried for both horizontal and vertical resolution information.
              This is a float value.

       (monitor-yresolution 96)

              Sets the monitor's vertical resolution, in dots per inch.  If set to 0, forces  the
              X  server  to  be  queried for both horizontal and vertical resolution information.
              This is a float value.

       (monitor-resolution-from-windowing-system yes)

              When enabled, GIMP will use the  monitor  resolution  from  the  windowing  system.
              Possible values are yes and no.

       (navigation-preview-size medium)

              Sets  the size of the navigation preview available in the lower right corner of the
              image window.  Possible values are tiny, extra-small, small, medium, large,  extra-
              large, huge, enormous and gigantic.

       (default-view
                  (show-menubar yes)
                  (show-statusbar yes)
                  (show-rulers yes)
                  (show-scrollbars yes)
                  (show-selection yes)
                  (show-layer-boundary yes)
                  (show-canvas-boundary yes)
                  (show-guides yes)
                  (show-grid no)
                  (show-sample-points yes)
                  (snap-to-guides yes)
                  (snap-to-grid no)
                  (snap-to-canvas no)
                  (snap-to-path no)
                  (padding-mode default)
                  (padding-color (color-rgb 1 1 1))
                  (padding-in-show-all no))

              Sets the default settings for the image view.  This is a parameter list.

       (default-fullscreen-view
                  (show-menubar yes)
                  (show-statusbar yes)
                  (show-rulers yes)
                  (show-scrollbars yes)
                  (show-selection yes)
                  (show-layer-boundary yes)
                  (show-canvas-boundary yes)
                  (show-guides yes)
                  (show-grid no)
                  (show-sample-points yes)
                  (snap-to-guides yes)
                  (snap-to-grid no)
                  (snap-to-canvas no)
                  (snap-to-path no)
                  (padding-mode default)
                  (padding-color (color-rgb 1 1 1))
                  (padding-in-show-all no))

              Sets the default settings used when an image is viewed in fullscreen mode.  This is
              a parameter list.

       (activate-on-focus yes)

              When enabled, an image will become the active image when its image window  receives
              the focus. This is useful for window managers using "click to focus".
               Possible values are yes and no.

       (space-bar-action pan)

              What  to do when the space bar is pressed in the image window.  Possible values are
              none, pan and move.

       (zoom-quality high)

              There's a tradeoff between speed and quality of the zoomed-out  display.   Possible
              values are low and high.

       (use-event-history no)

              Bugs  in  event  history  buffer  are frequent so in case of cursor offset problems
              turning it off helps.  Possible values are yes and no.

       (edit-non-visible no)

              When enabled, non-visible layers can be edited as normal.  Possible values are  yes
              and no.

       (move-tool-changes-active no)

              If enabled, the move tool sets the edited layer or path as active.  This used to be
              the default behaviour in older versions.  Possible values are yes and no.

       (filter-tool-max-recent 10)

              How many recent settings to keep around in filter tools.  This is an integer value.

       (filter-tool-use-last-settings no)

              Default to the last used settings in filter tools.  Possible values are yes and no.

       (filter-tool-show-color-options no)

              Show advanced color options in filter tools.  Possible values are yes and no.

       (trust-dirty-flag no)

              When enabled, GIMP will not save an image if it has not been changed since  it  was
              opened.  Possible values are yes and no.

       (save-device-status yes)

              Remember  the  current  tool,  pattern,  color,  and  brush  across  GIMP sessions.
              Possible values are yes and no.

       (devices-share-tool no)

              When enabled, the same tool and tool options will be used for all input devices. No
              tool  switching  will occur when the input device changes.  Possible values are yes
              and no.

       (save-session-info yes)

              Save the positions and sizes of the main dialogs when GIMP exits.  Possible  values
              are yes and no.

       (restore-session yes)

              Let  GIMP  try to restore your last saved session on each startup.  Possible values
              are yes and no.

       (restore-monitor no)

              When enabled, GIMP will try to restore  windows  on  the  monitor  they  were  open
              before.   When  disabled,  windows  will  appear  on  the  currently  used monitor.
              Possible values are yes and no.

       (save-tool-options yes)

              Save the tool options when GIMP exits.  Possible values are yes and no.

       (compact-sliders yes)

              Use compact style for sliders.  Possible values are yes and no.

       (show-tooltips yes)

              Show a tooltip when the pointer hovers over an item.  Possible values are  yes  and
              no.

       (tearoff-menus yes)

              When enabled, menus can be torn off.  Possible values are yes and no.

       (can-change-accels no)

              When  enabled,  you  can  change keyboard shortcuts for menu items by hitting a key
              combination while the menu item is highlighted.  Possible values are yes and no.

       (save-accels yes)

              Save changed keyboard shortcuts when GIMP exits.  Possible values are yes and no.

       (restore-accels yes)

              Restore saved keyboard shortcuts on each GIMP startup.  Possible values are yes and
              no.

       (last-opened-size 10)

              How  many  recently  opened  image  filenames to keep on the File menu.  This is an
              integer value.

       (max-new-image-size 128M)

              GIMP will warn the user if an attempt is made to create an image  that  would  take
              more memory than the size specified here.  The integer size can contain a suffix of
              'B', 'K', 'M' or 'G' which makes GIMP interpret the  size  as  being  specified  in
              bytes,  kilobytes,  megabytes  or  gigabytes.  If  no  suffix is specified the size
              defaults to being specified in kilobytes.

       (toolbox-color-area yes)

              Show the current foreground and background colors in the toolbox.  Possible  values
              are yes and no.

       (toolbox-foo-area no)

              Show  the  currently selected brush, pattern and gradient in the toolbox.  Possible
              values are yes and no.

       (toolbox-image-area no)

              Show the currently active image in the toolbox.  Possible values are yes and no.

       (toolbox-wilber yes)

              Show the GIMP mascot at the top of the toolbox.  Possible values are yes and no.

       (toolbox-groups yes)

              Use a single toolbox button for grouped tools.  Possible values are yes and no.

       (toolbox-group-menu-mode hover-single-column)

              Menu mode of grouped tools.  Possible values are  click,  hover  and  hover-single-
              column.

       (theme-path "${gimp_dir}/themes:${gimp_data_dir}/themes")

              Sets the theme search path.  This is a colon-separated list of folders to search.

       (theme "Dark")

              The name of the theme to use.  This is a string value.

       (icon-theme-path "${gimp_dir}/icons:${gimp_data_dir}/icons")

              Sets  the  icon  theme  search  path.  This is a colon-separated list of folders to
              search.

       (icon-theme "Symbolic")

              The name of the icon theme to use.  This is a string value.

       (icon-size auto)

              The size of the icons to use.  Possible values  are  auto,  theme,  small,  medium,
              large and huge.

       (use-help yes)

              When  enabled, pressing F1 will open the help browser.  Possible values are yes and
              no.

       (show-help-button yes)

              When enabled, dialogs will show a help button that gives access to the related help
              page.   Without  this  button,  the  help page can still be reached by pressing F1.
              Possible values are yes and no.

       (help-locales "")

              Specifies the language preferences used by  the  help  system.  This  is  a  colon-
              separated  list  of  language  identifiers  with decreasing priority. If empty, the
              language is taken from the user's locale setting.  This is a string value.

       (help-browser web-browser)

              Sets the browser used by the help  system.   Possible  values  are  gimp  and  web-
              browser.

       (search-show-unavailable-actions no)

              When  enabled,  a  search  of  actions will also return inactive actions.  Possible
              values are yes and no.

       (action-history-size 100)

              The maximum number of actions saved in history.  This is an integer value.

       (user-manual-online no)

              When enabled, the online user manual will be used by the  help  system.   Otherwise
              the locally installed copy is used.  Possible values are yes and no.

       (user-manual-online-uri "https://docs.gimp.org/2.10")

              The  location  of  the  online user manual. This is used if 'user-manual-online' is
              enabled.  This is a string value.

       (dock-window-hint utility)

              The window type hint that is set on dock windows and the toolbox window.  This  may
              affect  the  way your window manager decorates and handles these windows.  Possible
              values are normal, utility and keep-above.

       (cursor-handedness right)

              Sets the handedness for cursor positioning.  Possible values are left and right.

       (playground-npd-tool no)

              Enable the N-Point Deformation tool.  Possible values are yes and no.

       (playground-seamless-clone-tool no)

              Enable the Seamless Clone tool.  Possible values are yes and no.

       (color-profile-policy ask)

              How to handle embedded color profiles when opening a  file.   Possible  values  are
              ask, keep and convert.

       Sets the default folder path for all color profile file dialogs.  This is a
              single filename.

       (image-convert-profile-intent relative-colorimetric)

              Sets  the  default  rendering  intent  for  the  'Convert to Color Profile' dialog.
              Possible values are perceptual,  relative-colorimetric,  saturation  and  absolute-
              colorimetric.

       (image-convert-profile-black-point-compensation yes)

              Sets  the  default  'Black  Point  Compensation'  state  for  the 'Convert to Color
              Profile' dialog.  Possible values are yes and no.

       (image-convert-precision-layer-dither-method none)

              Sets the default  layer  dithering  method  for  the  'Convert  Precision'  dialog.
              Possible  values  are  none, floyd-steinberg, bayer, random, random-covariant, add,
              add-covariant, xor, xor-covariant, blue-noise and blue-noise-covariant.

       (image-convert-precision-text-layer-dither-method none)

              Sets the default text layer dithering method for the  'Convert  Precision'  dialog.
              Possible  values  are  none, floyd-steinberg, bayer, random, random-covariant, add,
              add-covariant, xor, xor-covariant, blue-noise and blue-noise-covariant.

       (image-convert-precision-channel-dither-method none)

              Sets the default channel dithering  method  for  the  'Convert  Precision'  dialog.
              Possible  values  are  none, floyd-steinberg, bayer, random, random-covariant, add,
              add-covariant, xor, xor-covariant, blue-noise and blue-noise-covariant.

       (image-convert-indexed-palette-type generate)

              Sets the default palette type for the 'Convert to Indexed' dialog.  Possible values
              are generate, web, mono and custom.

       (image-convert-indexed-max-colors 256)

              Sets the default maximum number of colors for the 'Convert to Indexed' dialog.
               This is an integer value.

       (image-convert-indexed-remove-duplicates yes)

              Sets  the  default  'Remove  duplicate  colors'  state for the 'Convert to Indexed'
              dialog.  Possible values are yes and no.

       (image-convert-indexed-dither-type none)

              Sets the default dithering type for the  'Convert  to  Indexed'  dialog.   Possible
              values are none, fs, fs-lowbleed and fixed.

       (image-convert-indexed-dither-alpha no)

              Sets  the  default  'Dither  alpha'  state  for  the  'Convert  to Indexed' dialog.
              Possible values are yes and no.

       (image-convert-indexed-dither-text-layers no)

              Sets the default 'Dither text layers' state for the 'Convert  to  Indexed'  dialog.
              Possible values are yes and no.

       (image-resize-fill-type transparent)

              Sets  the  default  fill  type  for  the 'Canvas Size' dialog.  Possible values are
              foreground, background, white, transparent and pattern.

       (image-resize-layer-set none)

              Sets the default set of layers to resize for the 'Canvas  Size'  dialog.   Possible
              values are none, all, image-sized, visible and linked.

       (image-resize-resize-text-layers no)

              Sets the default 'Resize text layers' state for the 'Canvas Size' dialog.  Possible
              values are yes and no.

       (layer-new-name "Layer")

              Sets the default layer name for the 'New Layer' dialog.  This is a string value.

       (layer-new-mode normal)

              Sets the default mode for the 'New Layer'  dialog.   Possible  values  are  normal-
              legacy,  dissolve,  behind-legacy,  multiply-legacy, screen-legacy, overlay-legacy,
              difference-legacy, addition-legacy, subtract-legacy,  darken-only-legacy,  lighten-
              only-legacy,  hsv-hue-legacy,  hsv-saturation-legacy,  hsl-color-legacy, hsv-value-
              legacy,  divide-legacy,  dodge-legacy,  burn-legacy,  hardlight-legacy,  softlight-
              legacy, grain-extract-legacy, grain-merge-legacy, color-erase-legacy, overlay, lch-
              hue,  lch-chroma,  lch-color,  lch-lightness,  normal,  behind,  multiply,  screen,
              difference, addition, subtract, darken-only, lighten-only, hsv-hue, hsv-saturation,
              hsl-color, hsv-value, divide, dodge,  burn,  hardlight,  softlight,  grain-extract,
              grain-merge,  vivid-light,  pin-light,  linear-light,  hard-mix, exclusion, linear-
              burn, luma-darken-only, luma-lighten-only, luminance,  color-erase,  erase,  merge,
              split, pass-through, replace and anti-erase.

       (layer-new-blend-space auto)

              Sets the default blend space for the 'New Layer' dialog.  Possible values are auto,
              rgb-linear, rgb-perceptual and lab.

       (layer-new-composite-space auto)

              Sets the default composite space for the 'New Layer' dialog.  Possible  values  are
              auto, rgb-linear, rgb-perceptual and lab.

       (layer-new-composite-mode auto)

              Sets  the  default  composite mode for the 'New Layer' dialog.  Possible values are
              auto, union, clip-to-backdrop, clip-to-layer and intersection.

       (layer-new-opacity 1)

              Sets the default opacity for the 'New Layer' dialog.  This is a float value.

       (layer-new-fill-type transparent)

              Sets the default fill type  for  the  'New  Layer'  dialog.   Possible  values  are
              foreground, background, white, transparent and pattern.

       (layer-resize-fill-type transparent)

              Sets  the  default fill type for the 'Layer Boundary Size' dialog.  Possible values
              are foreground, background, white, transparent and pattern.

       (layer-add-mask-type white)

              Sets the default mask for the 'Add Layer Mask' dialog.  Possible values are  white,
              black, alpha, alpha-transfer, selection, copy and channel.

       (layer-add-mask-invert no)

              Sets  the  default  'invert  mask' state for the 'Add Layer Mask' dialog.  Possible
              values are yes and no.

       (layer-merge-type expand-as-necessary)

              Sets the default merge type for the 'Merge Visible Layers' dialog.  Possible values
              are expand-as-necessary, clip-to-image, clip-to-bottom-layer and flatten-image.

       (layer-merge-active-group-only yes)

              Sets  the  default  'Active  group  only'  for  the  'Merge Visible Layers' dialog.
              Possible values are yes and no.

       (layer-merge-discard-invisible no)

              Sets the default  'Discard  invisible'  for  the  'Merge  Visible  Layers'  dialog.
              Possible values are yes and no.

       (channel-new-name "Channel")

              Sets  the  default  channel  name  for  the 'New Channel' dialog.  This is a string
              value.

       (channel-new-color (color-rgba 0 0 0 0.5))

              Sets the default color and opacity for the 'New  Channel'  dialog.   The  color  is
              specified  in  the  form  (color-rgba  red green blue alpha) with channel values as
              floats in the range of 0.0 to 1.0.

       (path-new-name "Path")

              Sets the default path name for the 'New Path' dialog.  This is a string value.

       Sets the default folder path for the 'Export Path' dialog.  This is a single
              filename.

       (path-export-active-only yes)

              Sets the default 'Export the active path'  state  for  the  'Export  Path'  dialog.
              Possible values are yes and no.

       Sets the default folder path for the 'Import Path' dialog.  This is a single
              filename.

       (path-import-merge no)

              Sets  the  default  'Merge  imported  paths'  state  for  the 'Import Path' dialog.
              Possible values are yes and no.

       (path-import-scale no)

              Sets the default 'Scale imported paths to fit size' state  for  the  'Import  Path'
              dialog.  Possible values are yes and no.

       (selection-feather-radius 5)

              Sets  the  default  feather  radius  for the 'Feather Selection' dialog.  This is a
              float value.

       (selection-feather-edge-lock yes)

              Sets the default 'Selected areas  continue  outside  the  image'  setting  for  the
              'Feather Selection' dialog.  Possible values are yes and no.

       (selection-grow-radius 1)

              Sets  the  default  grow  radius  for the 'Grow Selection' dialog.  This is a float
              value.

       (selection-shrink-radius 1)

              Sets the default shrink radius for the 'Shrink Selection' dialog.  This is a  float
              value.

       (selection-shrink-edge-lock no)

              Sets  the  default  'Selected  areas  continue  outside  the image' setting for the
              'Shrink Selection' dialog.  Possible values are yes and no.

       (selection-border-radius 5)

              Sets the default border radius for the 'Border Selection' dialog.  This is a  float
              value.

       (selection-border-style smooth)

              Sets  the  default border style for the 'Border Selection' dialog.  Possible values
              are hard, smooth and feathered.

       (selection-border-edge-lock no)

              Sets the default 'Selected areas  continue  outside  the  image'  setting  for  the
              'Border Selection' dialog.  Possible values are yes and no.

       (fill-options
                  (style solid)
                  (antialias yes)
                  (feather no)
                  (feather-radius 10))

              The default fill options for the fill dialogs.  This is a parameter list.

       (stroke-options
                  (style solid)
                  (antialias yes)
                  (feather no)
                  (feather-radius 10)
                  (method line)
                  (width 6)
                  (unit pixels)
                  (cap-style butt)
                  (join-style miter)
                  (miter-limit 10)
                  (dash-offset 0)
                  (dash-info 0)
                  (emulate-brush-dynamics no))

              The default stroke options for the stroke dialogs.  This is a parameter list.

       (fractalexplorer-path "${gimp_dir}/fractalexplorer:${gimp_data_dir}/fractalexplorer")

              Where  to  search  for  fractals  used  by the Fractal Explorer plug-in.  This is a
              colon-separated list of folders to search.

       (gfig-path "${gimp_dir}/gfig:${gimp_data_dir}/gfig")

              Where to search for Gfig figures used by  the  Gfig  plug-in.   This  is  a  colon-
              separated list of folders to search.

       (gflare-path "${gimp_dir}/gflare:${gimp_data_dir}/gflare")

              Where  to search for gflares used by the GFlare plug-in.  This is a colon-separated
              list of folders to search.

       (gimpressionist-path "${gimp_dir}/gimpressionist:${gimp_data_dir}/gimpressionist")

              Where to search for data used by the Gimpressionist  plug-in.   This  is  a  colon-
              separated list of folders to search.

       (script-fu-path "${gimp_dir}/scripts:${gimp_data_dir}/scripts")

              This  path will be searched for scripts when the Script-Fu plug-in is run.  This is
              a colon-separated list of folders to search.

PATH EXPANSION

       Strings of type PATH are expanded in a manner similar to bash(1).  Specifically: tilde (~)
       is  expanded  to  the  user's  home directory. Note that the bash feature of being able to
       refer to other user's home directories by writing ~userid/ is not valid in this file.

       ${variable} is expanded to the current value of an environment variable.  There are a  few
       variables that are pre-defined:

       gimp_dir
              The  personal  gimp directory which is set to the value of the environment variable
              GIMP2_DIRECTORY or to $XDG_CONFIG_HOME/GIMP/2.10.

       gimp_data_dir
              Base for paths to shareable data, which is set to  the  value  of  the  environment
              variable GIMP2_DATADIR or to the compiled-in default value ${datarootdir}/gimp/2.0.

       gimp_plug_in_dir
              Base  to  paths for architecture-specific plug-ins and modules, which is set to the
              value of the environment variable GIMP2_PLUGINDIR or  to  the  compiled-in  default
              value /usr/lib/gimp/2.0.

       gimp_sysconf_dir
              Path  to configuration files, which is set to the value of the environment variable
              GIMP2_SYSCONFDIR or to the compiled-in default value /etc/gimp/2.0.

       gimp_cache_dir
              Path to cached files, which is  set  to  the  value  of  the  environment  variable
              GIMP2_CACHEDIR or to the system default for per-user cached files.

       gimp_temp_dir
              Path  to  temporary  files,  which  is set to the value of the environment variable
              GIMP2_TEMPDIR or to the system default for temporary files.

FILES

       /etc/gimp/2.0/gimprc
              System-wide configuration file

       $XDG_CONFIG_HOME/GIMP/2.10/gimprc
              Per-user configuration file

SEE ALSO

       gimp(1)