Provided by: systemd_251.4-1ubuntu7_amd64 bug

NAME

       journald.conf, journald.conf.d, journald@.conf - Journal service configuration files

SYNOPSIS

       /etc/systemd/journald.conf

       /etc/systemd/journald.conf.d/*.conf

       /run/systemd/journald.conf.d/*.conf

       /usr/lib/systemd/journald.conf.d/*.conf

       /etc/systemd/journald@NAMESPACE.conf

       /etc/systemd/journald@NAMESPACE.conf.d/*.conf

       /run/systemd/journald@NAMESPACE.conf.d/*.conf

       /usr/lib/systemd/journald@NAMESPACE.conf.d/*.conf

DESCRIPTION

       These files configure various parameters of the systemd journal service, systemd-
       journald.service(8). See systemd.syntax(7) for a general description of the syntax.

       The systemd-journald instance managing the default namespace is configured by
       /etc/systemd/journald.conf and associated drop-ins. Instances managing other namespaces
       read /etc/systemd/journald@NAMESPACE.conf and associated drop-ins with the namespace
       identifier filled in. This allows each namespace to carry a distinct configuration. See
       systemd-journald.service(8) for details about journal namespaces.

CONFIGURATION DIRECTORIES AND PRECEDENCE

       The default configuration is set during compilation, so configuration is only needed when
       it is necessary to deviate from those defaults. Initially, the main configuration file in
       /etc/systemd/ contains commented out entries showing the defaults as a guide to the
       administrator. Local overrides can be created by editing this file or by creating
       drop-ins, as described below. Using drop-ins for local configuration is recommended over
       modifications to the main configuration file.

       In addition to the "main" configuration file, drop-in configuration snippets are read from
       /usr/lib/systemd/*.conf.d/, /usr/local/lib/systemd/*.conf.d/, and /etc/systemd/*.conf.d/.
       Those drop-ins have higher precedence and override the main configuration file. Files in
       the *.conf.d/ configuration subdirectories are sorted by their filename in lexicographic
       order, regardless of in which of the subdirectories they reside. When multiple files
       specify the same option, for options which accept just a single value, the entry in the
       file sorted last takes precedence, and for options which accept a list of values, entries
       are collected as they occur in the sorted files.

       When packages need to customize the configuration, they can install drop-ins under /usr/.
       Files in /etc/ are reserved for the local administrator, who may use this logic to
       override the configuration files installed by vendor packages. Drop-ins have to be used to
       override package drop-ins, since the main configuration file has lower precedence. It is
       recommended to prefix all filenames in those subdirectories with a two-digit number and a
       dash, to simplify the ordering of the files.

       To disable a configuration file supplied by the vendor, the recommended way is to place a
       symlink to /dev/null in the configuration directory in /etc/, with the same filename as
       the vendor configuration file.

OPTIONS

       All options are configured in the [Journal] section:

       Storage=
           Controls where to store journal data. One of "volatile", "persistent", "auto" and
           "none". If "volatile", journal log data will be stored only in memory, i.e. below the
           /run/log/journal hierarchy (which is created if needed). If "persistent", data will be
           stored preferably on disk, i.e. below the /var/log/journal hierarchy (which is created
           if needed), with a fallback to /run/log/journal (which is created if needed), during
           early boot and if the disk is not writable.  "auto" behaves like "persistent" if the
           /var/log/journal directory exists, and "volatile" otherwise (the existence of the
           directory controls the storage mode).  "none" turns off all storage, all log data
           received will be dropped (but forwarding to other targets, such as the console, the
           kernel log buffer, or a syslog socket will still work). Defaults to "auto" in the
           default journal namespace, and "persistent" in all others.

           Note that journald will initially use volatile storage, until a call to journalctl
           --flush (or sending SIGUSR1 to journald) will cause it to switch to persistent logging
           (under the conditions mentioned above). This is done automatically on boot via
           "systemd-journal-flush.service".

           Note that when this option is changed to "volatile", existing persistent data is not
           removed. In the other direction, journalctl(1) with the --flush option may be used to
           move volatile data to persistent storage.

       Compress=
           Can take a boolean value. If enabled (the default), data objects that shall be stored
           in the journal and are larger than the default threshold of 512 bytes are compressed
           before they are written to the file system. It can also be set to a number of bytes to
           specify the compression threshold directly. Suffixes like K, M, and G can be used to
           specify larger units.

       Seal=
           Takes a boolean value. If enabled (the default), and a sealing key is available (as
           created by journalctl(1)'s --setup-keys command), Forward Secure Sealing (FSS) for all
           persistent journal files is enabled. FSS is based on Seekable Sequential Key
           Generators[1] by G. A. Marson and B. Poettering (doi:10.1007/978-3-642-40203-6_7) and
           may be used to protect journal files from unnoticed alteration.

       SplitMode=
           Controls whether to split up journal files per user, either "uid" or "none". Split
           journal files are primarily useful for access control: on UNIX/Linux access control is
           managed per file, and the journal daemon will assign users read access to their
           journal files. If "uid", all regular users (with UID outside the range of system
           users, dynamic service users, and the nobody user) will each get their own journal
           files, and system users will log to the system journal. See Users, Groups, UIDs and
           GIDs on systemd systems[2] for more details about UID ranges. If "none", journal files
           are not split up by user and all messages are instead stored in the single system
           journal. In this mode unprivileged users generally do not have access to their own log
           data. Note that splitting up journal files by user is only available for journals
           stored persistently. If journals are stored on volatile storage (see Storage= above),
           only a single journal file is used. Defaults to "uid".

       RateLimitIntervalSec=, RateLimitBurst=
           Configures the rate limiting that is applied to all messages generated on the system.
           If, in the time interval defined by RateLimitIntervalSec=, more messages than
           specified in RateLimitBurst= are logged by a service, all further messages within the
           interval are dropped until the interval is over. A message about the number of dropped
           messages is generated. This rate limiting is applied per-service, so that two services
           which log do not interfere with each other's limits. Defaults to 10000 messages in
           30s. The time specification for RateLimitIntervalSec= may be specified in the
           following units: "s", "min", "h", "ms", "us". To turn off any kind of rate limiting,
           set either value to 0.

           Note that the effective rate limit is multiplied by a factor derived from the
           available free disk space for the journal. Currently, this factor is calculated using
           the base 2 logarithm.

           Table 1. Example RateLimitBurst= rate modifications by the available disk space
           ┌─────────────────────┬──────────────────┐
           │Available Disk SpaceBurst Multiplier │
           ├─────────────────────┼──────────────────┤
           │<= 1MB               │ 1                │
           ├─────────────────────┼──────────────────┤
           │<= 16MB              │ 2                │
           ├─────────────────────┼──────────────────┤
           │<= 256MB             │ 3                │
           ├─────────────────────┼──────────────────┤
           │<= 4GB               │ 4                │
           ├─────────────────────┼──────────────────┤
           │<= 64GB              │ 5                │
           ├─────────────────────┼──────────────────┤
           │<= 1TB               │ 6                │
           └─────────────────────┴──────────────────┘
           If a service provides rate limits for itself through LogRateLimitIntervalSec= and/or
           LogRateLimitBurst= in systemd.exec(5), those values will override the settings
           specified here.

       SystemMaxUse=, SystemKeepFree=, SystemMaxFileSize=, SystemMaxFiles=, RuntimeMaxUse=,
       RuntimeKeepFree=, RuntimeMaxFileSize=, RuntimeMaxFiles=
           Enforce size limits on the journal files stored. The options prefixed with "System"
           apply to the journal files when stored on a persistent file system, more specifically
           /var/log/journal. The options prefixed with "Runtime" apply to the journal files when
           stored on a volatile in-memory file system, more specifically /run/log/journal. The
           former is used only when /var/ is mounted, writable, and the directory
           /var/log/journal exists. Otherwise, only the latter applies. Note that this means that
           during early boot and if the administrator disabled persistent logging, only the
           latter options apply, while the former apply if persistent logging is enabled and the
           system is fully booted up.  journalctl and systemd-journald ignore all files with
           names not ending with ".journal" or ".journal~", so only such files, located in the
           appropriate directories, are taken into account when calculating current disk usage.

           SystemMaxUse= and RuntimeMaxUse= control how much disk space the journal may use up at
           most.  SystemKeepFree= and RuntimeKeepFree= control how much disk space
           systemd-journald shall leave free for other uses.  systemd-journald will respect both
           limits and use the smaller of the two values.

           The first pair defaults to 10% and the second to 15% of the size of the respective
           file system, but each value is capped to 4G. If the file system is nearly full and
           either SystemKeepFree= or RuntimeKeepFree= are violated when systemd-journald is
           started, the limit will be raised to the percentage that is actually free. This means
           that if there was enough free space before and journal files were created, and
           subsequently something else causes the file system to fill up, journald will stop
           using more space, but it will not be removing existing files to reduce the footprint
           again, either. Also note that only archived files are deleted to reduce the space
           occupied by journal files. This means that, in effect, there might still be more space
           used than SystemMaxUse= or RuntimeMaxUse= limit after a vacuuming operation is
           complete.

           SystemMaxFileSize= and RuntimeMaxFileSize= control how large individual journal files
           may grow at most. This influences the granularity in which disk space is made
           available through rotation, i.e. deletion of historic data. Defaults to one eighth of
           the values configured with SystemMaxUse= and RuntimeMaxUse=, so that usually seven
           rotated journal files are kept as history.

           Specify values in bytes or use K, M, G, T, P, E as units for the specified sizes
           (equal to 1024, 1024², ... bytes). Note that size limits are enforced synchronously
           when journal files are extended, and no explicit rotation step triggered by time is
           needed.

           SystemMaxFiles= and RuntimeMaxFiles= control how many individual journal files to keep
           at most. Note that only archived files are deleted to reduce the number of files until
           this limit is reached; active files will stay around. This means that, in effect,
           there might still be more journal files around in total than this limit after a
           vacuuming operation is complete. This setting defaults to 100.

       MaxFileSec=
           The maximum time to store entries in a single journal file before rotating to the next
           one. Normally, time-based rotation should not be required as size-based rotation with
           options such as SystemMaxFileSize= should be sufficient to ensure that journal files
           do not grow without bounds. However, to ensure that not too much data is lost at once
           when old journal files are deleted, it might make sense to change this value from the
           default of one month. Set to 0 to turn off this feature. This setting takes time
           values which may be suffixed with the units "year", "month", "week", "day", "h" or "m"
           to override the default time unit of seconds.

       MaxRetentionSec=
           The maximum time to store journal entries. This controls whether journal files
           containing entries older than the specified time span are deleted. Normally,
           time-based deletion of old journal files should not be required as size-based deletion
           with options such as SystemMaxUse= should be sufficient to ensure that journal files
           do not grow without bounds. However, to enforce data retention policies, it might make
           sense to change this value from the default of 0 (which turns off this feature). This
           setting also takes time values which may be suffixed with the units "year", "month",
           "week", "day", "h" or " m" to override the default time unit of seconds.

       SyncIntervalSec=
           The timeout before synchronizing journal files to disk. After syncing, journal files
           are placed in the OFFLINE state. Note that syncing is unconditionally done immediately
           after a log message of priority CRIT, ALERT or EMERG has been logged. This setting
           hence applies only to messages of the levels ERR, WARNING, NOTICE, INFO, DEBUG. The
           default timeout is 5 minutes.

       ForwardToSyslog=, ForwardToKMsg=, ForwardToConsole=, ForwardToWall=
           Control whether log messages received by the journal daemon shall be forwarded to a
           traditional syslog daemon, to the kernel log buffer (kmsg), to the system console, or
           sent as wall messages to all logged-in users. These options take boolean arguments. If
           forwarding to syslog is enabled but nothing reads messages from the socket, forwarding
           to syslog has no effect. By default, only forwarding to syslog and wall is enabled.
           These settings may be overridden at boot time with the kernel command line options
           "systemd.journald.forward_to_syslog", "systemd.journald.forward_to_kmsg",
           "systemd.journald.forward_to_console", and "systemd.journald.forward_to_wall". If the
           option name is specified without "=" and the following argument, true is assumed.
           Otherwise, the argument is parsed as a boolean.

           When forwarding to the console, the TTY to log to can be changed with TTYPath=,
           described below.

           When forwarding to the kernel log buffer (kmsg), make sure to select a suitably large
           size for the log buffer, for example by adding "log_buf_len=8M" to the kernel command
           line.  systemd will automatically disable kernel's rate-limiting applied to userspace
           processes (equivalent to setting "printk.devkmsg=on").

       MaxLevelStore=, MaxLevelSyslog=, MaxLevelKMsg=, MaxLevelConsole=, MaxLevelWall=
           Controls the maximum log level of messages that are stored in the journal, forwarded
           to syslog, kmsg, the console or wall (if that is enabled, see above). As argument,
           takes one of "emerg", "alert", "crit", "err", "warning", "notice", "info", "debug", or
           integer values in the range of 0–7 (corresponding to the same levels). Messages equal
           or below the log level specified are stored/forwarded, messages above are dropped.
           Defaults to "debug" for MaxLevelStore= and MaxLevelSyslog=, to ensure that the all
           messages are stored in the journal and forwarded to syslog. Defaults to "notice" for
           MaxLevelKMsg=, "info" for MaxLevelConsole=, and "emerg" for MaxLevelWall=. These
           settings may be overridden at boot time with the kernel command line options
           "systemd.journald.max_level_store=", "systemd.journald.max_level_syslog=",
           "systemd.journald.max_level_kmsg=", "systemd.journald.max_level_console=",
           "systemd.journald.max_level_wall=".

       ReadKMsg=
           Takes a boolean value. If enabled systemd-journal processes /dev/kmsg messages
           generated by the kernel. In the default journal namespace this option is enabled by
           default, it is disabled in all others.

       Audit=
           Takes a boolean value. If enabled systemd-journal will turn on kernel auditing on
           start-up. If disabled it will turn it off. If unset it will neither enable nor disable
           it, leaving the previous state unchanged. Note that this option does not control
           whether systemd-journald collects generated audit records, it just controls whether it
           tells the kernel to generate them. This means if another tool turns on auditing even
           if systemd-journald left it off, it will still collect the generated messages.
           Defaults to off.

       TTYPath=
           Change the console TTY to use if ForwardToConsole=yes is used. Defaults to
           /dev/console.

       LineMax=
           The maximum line length to permit when converting stream logs into record logs. When a
           systemd unit's standard output/error are connected to the journal via a stream socket,
           the data read is split into individual log records at newline ("\n", ASCII 10) and NUL
           characters. If no such delimiter is read for the specified number of bytes a hard log
           record boundary is artificially inserted, breaking up overly long lines into multiple
           log records. Selecting overly large values increases the possible memory usage of the
           Journal daemon for each stream client, as in the worst case the journal daemon needs
           to buffer the specified number of bytes in memory before it can flush a new log record
           to disk. Also note that permitting overly large line maximum line lengths affects
           compatibility with traditional log protocols as log records might not fit anymore into
           a single AF_UNIX or AF_INET datagram. Takes a size in bytes. If the value is suffixed
           with K, M, G or T, the specified size is parsed as Kilobytes, Megabytes, Gigabytes, or
           Terabytes (with the base 1024), respectively. Defaults to 48K, which is relatively
           large but still small enough so that log records likely fit into network datagrams
           along with extra room for metadata. Note that values below 79 are not accepted and
           will be bumped to 79.

FORWARDING TO TRADITIONAL SYSLOG DAEMONS

       Journal events can be transferred to a different logging daemon in two different ways.
       With the first method, messages are immediately forwarded to a socket
       (/run/systemd/journal/syslog), where the traditional syslog daemon can read them. This
       method is controlled by the ForwardToSyslog= option. With a second method, a syslog daemon
       behaves like a normal journal client, and reads messages from the journal files, similarly
       to journalctl(1). With this, messages do not have to be read immediately, which allows a
       logging daemon which is only started late in boot to access all messages since the start
       of the system. In addition, full structured meta-data is available to it. This method of
       course is available only if the messages are stored in a journal file at all. So it will
       not work if Storage=none is set. It should be noted that usually the second method is used
       by syslog daemons, so the Storage= option, and not the ForwardToSyslog= option, is
       relevant for them.

SEE ALSO

       systemd(1), systemd-journald.service(8), journalctl(1), systemd.journal-fields(7),
       systemd-system.conf(5)

NOTES

        1. Seekable Sequential Key Generators
           https://eprint.iacr.org/2013/397

        2. Users, Groups, UIDs and GIDs on systemd systems
           https://systemd.io/UIDS-GIDS