Ubuntu Manpage: machine-id - Local machine ID configuration file

Provided by: systemd_251.4-1ubuntu7_amd64

NAME

       machine-id - Local machine ID configuration file

SYNOPSIS

       /etc/machine-id

DESCRIPTION

The /etc/machine-id file contains the unique machine ID of the local system that is set
during installation or boot. The machine ID is a single newline-terminated, hexadecimal,
32-character, lowercase ID. When decoded from hexadecimal, this corresponds to a
16-byte/128-bit value. This ID may not be all zeros.

The machine ID is usually generated from a random source during system installation or
first boot and stays constant for all subsequent boots. Optionally, for stateless systems,
it is generated during runtime during early boot if necessary.

The machine ID may be set, for example when network booting, with the systemd.machine_id=
kernel command line parameter or by passing the option --machine-id= to systemd. An ID
specified in this manner has higher priority and will be used instead of the ID stored in
/etc/machine-id.

The machine ID does not change based on local or network configuration or when hardware is
replaced. Due to this and its greater length, it is a more useful replacement for the
gethostid(3) call that POSIX specifies.

This machine ID adheres to the same format and logic as the D-Bus machine ID.

This ID uniquely identifies the host. It should be considered "confidential", and must not
be exposed in untrusted environments, in particular on the network. If a stable unique
identifier that is tied to the machine is needed for some application, the machine ID or
any part of it must not be used directly. Instead the machine ID should be hashed with a
cryptographic, keyed hash function, using a fixed, application-specific key. That way the
ID will be properly unique, and derived in a constant way from the machine ID but there
will be no way to retrieve the original machine ID from the application-specific one. The
sd_id128_get_machine_app_specific(3) API provides an implementation of such an algorithm.

INITIALIZATION

Each machine should have a non-empty ID in normal operation. The ID of each machine should
be unique. To achieve those objectives, /etc/machine-id can be initialized in a few
different ways.

For normal operating system installations, where a custom image is created for a specific
machine, /etc/machine-id should be populated during installation.

systemd-machine-id-setup(1) may be used by installer tools to initialize the machine ID at
install time, but /etc/machine-id may also be written using any other means.

For operating system images which are created once and used on multiple machines, for
example for containers or in the cloud, /etc/machine-id should be either missing or an
empty file in the generic file system image (the difference between the two options is
described under "First Boot Semantics" below). An ID will be generated during boot and
saved to this file if possible. Having an empty file in place is useful because it allows
a temporary file to be bind-mounted over the real file, in case the image is used
read-only. Also see Safely Building Images[1].

systemd-firstboot(1) may be used to initialize /etc/machine-id on mounted (but not booted)
system images.

When a machine is booted with systemd(1) the ID of the machine will be established. If
systemd.machine_id= or --machine-id= options (see first section) are specified, this value
will be used. Otherwise, the value in /etc/machine-id will be used. If this file is empty
or missing, systemd will attempt to use the D-Bus machine ID from
/var/lib/dbus/machine-id, the value of the kernel command line option container_uuid, the
KVM DMI product_uuid or the devicetree vm,uuid (on KVM systems), and finally a randomly
generated UUID.

After the machine ID is established, systemd(1) will attempt to save it to
/etc/machine-id. If this fails, it will attempt to bind-mount a temporary file over
/etc/machine-id. It is an error if the file system is read-only and does not contain a
(possibly empty) /etc/machine-id file.

systemd-machine-id-commit.service(8) will attempt to write the machine ID to the file
system if /etc/machine-id or /etc/ are read-only during early boot but become writable
later on.

FIRST BOOT SEMANTICS

       /etc/machine-id is used to decide whether a boot is the first one. The rules are as
       follows:

        1. If /etc/machine-id does not exist, this is a first boot. During early boot, systemd
           will write "uninitialized\n" to this file and overmount a temporary file which
           contains the actual machine ID. Later (after first-boot-complete.target has been
           reached), the real machine ID will be written to disk.

        2. If /etc/machine-id contains the string "uninitialized", a boot is also considered the
           first boot. The same mechanism as above applies.

        3. If /etc/machine-id exists and is empty, a boot is not considered the first boot.
           systemd will still bind-mount a file containing the actual machine-id over it and
           later try to commit it to disk (if /etc/ is writable).

        4. If /etc/machine-id already contains a valid machine-id, this is not a first boot.

       If by any of the above rules, a first boot is detected, units with ConditionFirstBoot=yes
       will be run.

RELATION TO OSF UUIDS

       Note that the machine ID historically is not an OSF UUID as defined by RFC 4122[2], nor a
       Microsoft GUID; however, starting with systemd v30, newly generated machine IDs do qualify
       as Variant 1 Version 4 UUIDs, as per RFC 4122.

       In order to maintain compatibility with existing installations, an application requiring a
       strictly RFC 4122 compliant UUID should decode the machine ID, and then (non-reversibly)
       apply the following operations to turn it into a valid RFC 4122 Variant 1 Version 4 UUID.
       With "id" being an unsigned character array:

           /* Set UUID version to 4 --- truly random generation */
           id[6] = (id[6] & 0x0F) | 0x40;
           /* Set the UUID variant to DCE */
           id[8] = (id[8] & 0x3F) | 0x80;

       (This code is inspired by "generate_random_uuid()" of drivers/char/random.c from the Linux
       kernel sources.)

HISTORY

       The simple configuration file format of /etc/machine-id originates in the
       /var/lib/dbus/machine-id file introduced by D-Bus. In fact, this latter file might be a
       symlink to /etc/machine-id.

NOTES

        1. Safely Building Images
           https://systemd.io/BUILDING_IMAGES

        2. RFC 4122
           https://tools.ietf.org/html/rfc4122