Provided by: swift-object-expirer_2.30.0+git2022100608.49d35e0c3-0ubuntu1_all 
NAME
object-expirer.conf - configuration file for the OpenStack Swift object expirer daemon
SYNOPSIS
object-expirer.conf
DESCRIPTION
This is the configuration file used by the object expirer daemon. The daemon's function is
to query the internal hidden expiring_objects_account to discover objects that need to be
deleted and to then delete them.
The configuration file follows the python-pastedeploy syntax. The file is divided into
sections, which are enclosed by square brackets. Each section will contain a certain
number of key/value parameters which are described later.
Any line that begins with a '#' symbol is ignored.
You can find more information about python-pastedeploy configuration format at
http://pythonpaste.org/deploy/#config-format
GLOBAL SECTION
This is indicated by section named [DEFAULT]. Below are the parameters that are acceptable
within this section.
swift_dir
Swift configuration directory. The default is /etc/swift.
user The system user that the object server will run as. The default is swift.
log_name
Label used when logging. The default is swift.
log_facility
Syslog log facility. The default is LOG_LOCAL0.
log_level
Logging level. The default is INFO.
log_address
Logging address. The default is /dev/log.
log_max_line_length
The following caps the length of log lines to the value given; no limit if set to
0, the default.
log_custom_handlers
Comma separated list of functions to call to setup custom log handlers. functions
get passed: conf, name, log_to_console, log_route, fmt, logger, adapted_logger. The
default is empty.
log_udp_host
If set, log_udp_host will override log_address.
log_udp_port
UDP log port, the default is 514.
log_statsd_host
StatsD server. IPv4/IPv6 addresses and hostnames are supported. If a hostname
resolves to an IPv4 and IPv6 address, the IPv4 address will be used.
log_statsd_port
The default is 8125.
log_statsd_default_sample_rate
The default is 1.
log_statsd_sample_rate_factor
The default is 1.
log_statsd_metric_prefix
The default is empty.
nice_priority
Modify scheduling priority of server processes. Niceness values range from -20
(most favorable to the process) to 19 (least favorable to the process). The
default does not modify priority.
ionice_class
Modify I/O scheduling class of server processes. I/O niceness class values are
IOPRIO_CLASS_RT (realtime), IOPRIO_CLASS_BE (best-effort) and IOPRIO_CLASS_IDLE
(idle). The default does not modify class and priority. Work only with
ionice_priority.
ionice_priority
Modify I/O scheduling priority of server processes. I/O niceness priority is a
number which goes from 0 to 7. The higher the value, the lower the I/O priority of
the process. Work only with ionice_class. Ignored if IOPRIO_CLASS_IDLE is set.
PIPELINE SECTION
This is indicated by section name [pipeline:main]. Below are the parameters that are
acceptable within this section.
pipeline
It is used when you need to apply a number of filters. It is a list of filters
ended by an application. The default should be "catch_errors cache proxy-server"
APP SECTION
This is indicated by section name [app:object-server]. Below are the parameters that are
acceptable within this section.
use Entry point for paste.deploy for the object server. This is the reference to the
installed python egg. The default is egg:swift#proxy. See proxy-server.conf-sample
for options or See proxy-server.conf manpage.
nice_priority
Modify scheduling priority of server processes. Niceness values range from -20
(most favorable to the process) to 19 (least favorable to the process). The
default does not modify priority.
ionice_class
Modify I/O scheduling class of server processes. I/O niceness class values are
IOPRIO_CLASS_RT (realtime), IOPRIO_CLASS_BE (best-effort) and IOPRIO_CLASS_IDLE
(idle). The default does not modify class and priority. Work only with
ionice_priority.
ionice_priority
Modify I/O scheduling priority of server processes. I/O niceness priority is a
number which goes from 0 to 7. The higher the value, the lower the I/O priority of
the process. Work only with ionice_class. Ignored if IOPRIO_CLASS_IDLE is set.
FILTER SECTION
Any section that has its name prefixed by "filter:" indicates a filter section. Filters
are used to specify configuration parameters for specific swift middlewares. Below are
the filters available and respective acceptable parameters.
[filter:cache]
Caching middleware that manages caching in swift.
use Entry point for paste.deploy for the memcache middleware. This is the reference
to the installed python egg. The default is egg:swift#memcache. See proxy-
server.conf-sample for options or See proxy-server.conf manpage.
[filter:catch_errors]
use Entry point for paste.deploy for the catch_errors middleware. This is the
reference to the installed python egg. The default is egg:swift#catch_errors.
See proxy-server.conf-sample for options or See proxy-server.conf manpage.
[filter:proxy-logging]
Logging for the proxy server now lives in this middleware. If the access_* variables are
not set, logging directives from [DEFAULT] without "access_" will be used.
use Entry point for paste.deploy for the proxy_logging middleware. This is the
reference to the installed python egg. This is normally
egg:swift#proxy_logging. See proxy-server.conf-sample for options or See proxy-
server.conf manpage.
OBJECT EXPIRER SECTION
[object-expirer]
interval
Replaces run_pause with the more standard "interval", which means the replicator
won't pause unless it takes less than the interval set. The default is 300.
auto_create_account_prefix [deprecated]
The default is ".". Should be configured in swift.conf instead.
expiring_objects_account_name
The default is 'expiring_objects'.
report_interval
The default is 300 seconds.
request_tries
The number of times the expirer's internal client will attempt any given request
in the event of failure. The default is 3.
concurrency
Number of expirer workers to spawn. The default is 1.
processes
Processes is how many parts to divide the work into, one part per process that
will be doing the work. Processes set 0 means that a single process will be
doing all the work. Processes can also be specified on the command line and
will override the config value. The default is 0.
process
Process is which of the parts a particular process will work on process can also
be specified on the command line and will override the config value process is
"zero based", if you want to use 3 processes, you should run processes with
process set to 0, 1, and 2. The default is 0.
reclaim_age
The expirer will re-attempt expiring if the source object is not available up to
reclaim_age seconds before it gives up and deletes the entry in the queue. The
default is 604800 seconds.
recon_cache_path
Path to recon cache directory. The default is /var/cache/swift.
nice_priority
Modify scheduling priority of server processes. Niceness values range from -20
(most favorable to the process) to 19 (least favorable to the process). The
default does not modify priority.
ionice_class
Modify I/O scheduling class of server processes. I/O niceness class values are
IOPRIO_CLASS_RT (realtime), IOPRIO_CLASS_BE (best-effort) and IOPRIO_CLASS_IDLE
(idle). The default does not modify class and priority. Work only with
ionice_priority.
ionice_priority
Modify I/O scheduling priority of server processes. I/O niceness priority is a
number which goes from 0 to 7. The higher the value, the lower the I/O priority
of the process. Work only with ionice_class. Ignored if IOPRIO_CLASS_IDLE is
set.
DOCUMENTATION
More in depth documentation about the swift-object-expirer and also OpenStack Swift as a
whole can be found at https://docs.openstack.org/swift/latest/admin_guide.html and
https://docs.openstack.org/swift/latest/
SEE ALSO
swift-proxy-server.conf(5),