Provided by: libteam-utils_1.31-1build2_amd64 bug

NAME

       teamd.conf — libteam daemon configuration file

DESCRIPTION

       teamd uses JSON format configuration.

OPTIONS

       device (string)
              Desired name of new team device.

       debug_level (int)
              Level  of debug messages. The higher it is the more debug messages will be printed.
              It is the same as adding "-g" command line options.

              Default: 0 (disabled)

       hwaddr (string)
              Desired hardware address of new team device. Usual MAC address format is accepted.

       runner.name (string)
              Name of team device. The following runners are available:

              broadcast — Simple runner which directs the team device to transmit packets via all
              ports.

              roundrobin  — Simple runner which directs the team device to transmits packets in a
              round-robin fashion.

              random — Simple runner which directs the team device  to  transmits  packets  on  a
              randomly selected port.

              activebackup — Watches for link changes and selects active port to be used for data
              transfers.

              loadbalance — To do passive load balancing, runner only sets up BPF  hash  function
              which  will determine port for packet transmit. To do active load balancing, runner
              moves hashes among available ports trying to reach perfect balance.

              lacp  —  Implements  802.3ad  LACP  protocol.  Can  use  same  Tx  port   selection
              possibilities as loadbalance runner.

              Default: roundrobin

       notify_peers.count (int)
              Number  of  bursts of unsolicited NAs and gratuitous ARP packets sent after port is
              enabled or disabled.

              Default: 0 (disabled)

              Default for activebackup runner: 1

       notify_peers.interval (int)
              Value is positive number in milliseconds. Specifies an interval between  bursts  of
              notify-peer packets.

              Default: 0

       mcast_rejoin.count (int)
              Number  of  bursts of multicast group rejoin requests sent after port is enabled or
              disabled.

              Default: 0 (disabled)

              Default for activebackup runner: 1

       mcast_rejoin.interval (int)
              Value is positive number in milliseconds. Specifies an interval between  bursts  of
              multicast group rejoin requests.

              Default: 0

       link_watch.name | ports.PORTIFNAME.link_watch.name (string)
              Name of link watcher to be used. The following link watchers are available:

              ethtool — Uses Libteam lib to get port ethtool state changes.

              arp_ping  —  ARP requests are sent through a port. If an ARP reply is received, the
              link is considered to be up.

              nsna_ping — Similar to the previous, except that it uses IPv6 Neighbor Solicitation
              /  Neighbor Advertisement mechanism. This is an alternative to arp_ping and becomes
              handy in pure-IPv6 environments.

       ports (object)
              List of ports, network devices, to be used in a team device.

              See examples for more information.

       ports.PORTIFNAME.queue_id (int)
              ID of queue which this port should be mapped to.

              Default: None

ACTIVE-BACKUP RUNNER SPECIFIC OPTIONS

       runner.hwaddr_policy (string)
              This defines the policy of how hardware addresses of team device and  port  devices
              should be set during the team lifetime. The following are available:

              same_all  —  All ports will always have the same hardware address as the associated
              team device.

              by_active — Team device adopts the hardware address of the currently  active  port.
              This is useful when the port device is not able to change its hardware address.

              only_active  — Only the active port adopts the hardware address of the team device.
              The others have their own.

              Default: same_all

       ports.PORTIFNAME.prio (int)
              Port priority. The higher number means higher priority.

              Default: 0

       ports.PORTIFNAME.sticky (bool)
              Flag which indicates if the port is sticky. If set, it means the port does not  get
              unselected  if  another  port  with  higher  priority  or better parameters becomes
              available.

              Default: false

LOAD BALANCE RUNNER SPECIFIC OPTIONS

       runner.tx_hash (array)
              List of  fragment  types  (strings)  which  should  be  used  for  packet  Tx  hash
              computation. The following are available:

              eth — Uses source and destination MAC addresses.

              vlan — Uses VLAN id.

              ipv4 — Uses source and destination IPv4 addresses.

              ipv6 — Uses source and destination IPv6 addresses.

              ip — Uses source and destination IPv4 and IPv6 addresses.

              l3 — Uses source and destination IPv4 and IPv6 addresses.

              tcp — Uses source and destination TCP ports.

              udp — Uses source and destination UDP ports.

              sctp — Uses source and destination SCTP ports.

              l4 — Uses source and destination TCP and UDP and SCTP ports.

              Default: ["eth", "ipv4", "ipv6"]

       runner.tx_balancer.name (string)
              Name  of  active  Tx balancer. Active Tx balancing is disabled by default. The only
              value available is basic.

              Default: None

       runner.tx_balancer.balancing_interval (int)
              In tenths of a second. Periodic interval between rebalancing.

              Default: 50

LACP RUNNER SPECIFIC OPTIONS

       runner.active (bool)
              If active is true LACPDU frames are sent along the configured  links  periodically.
              If not, it acts as "speak when spoken to".

              Default: true

       runner.fast_rate (bool)
              Option  specifies  the  rate  at which our link partner is asked to transmit LACPDU
              packets. If this is true then packets will be sent once per second. Otherwise  they
              will be sent every 30 seconds.

              Default: false

       runner.tx_hash (array)
              Same as for load balance runner.

       runner.tx_balancer.name (string)
              Same as for load balance runner.

       runner.tx_balancer.balancing_interval (int)
              Same as for load balance runner.

       runner.sys_prio (int)
              System priority, value can be 0 – 65535.

              Default: 65535

       runner.min_ports (int)
              Specifies  the minimum number of ports that must be active before asserting carrier
              in the master interface, value can be 1 – 255.

              Default: 1

       runner.agg_select_policy (string)
              This selects the policy of how the aggregators will be selected. The following  are
              available:

              lacp_prio  —  Aggregator  with  highest priority according to LACP standard will be
              selected. Aggregator priority is affected by per-port option lacp_prio.

              lacp_prio_stable — Same as previous one, except do not replace selected  aggregator
              if it is still usable.

              bandwidth — Select aggregator with highest total bandwidth.

              count — Select aggregator with highest number of ports.

              port_config  —  Aggregator with highest priority according to per-port options prio
              and sticky will be selected. This means that the  aggregator  containing  the  port
              with  the highest priority will be selected unless at least one of the ports in the
              currently selected aggregator is sticky.

              Default: lacp_prio

       ports.PORTIFNAME.lacp_prio (int)
              Port priority according to LACP standard. The lower number means higher priority.

              Default: 255

       ports.PORTIFNAME.lacp_key (int)
              Port key according to LACP standard. It is only possible to  aggregate  ports  with
              the same key.

              Default: 0

ETHTOOL LINK WATCH SPECIFIC OPTIONS

       link_watch.delay_up | ports.PORTIFNAME.link_watch.delay_up (int)
              Value is a positive number in milliseconds. It is the delay between the link coming
              up and the runner being notified about it.

              Default: 0

       link_watch.delay_down | ports.PORTIFNAME.link_watch.delay_down (int)
              Value is a positive number in milliseconds. It is the delay between the link  going
              down and the runner being notified about it.

              Default: 0

ARP PING LINK WATCH SPECIFIC OPTIONS

       link_watch.interval | ports.PORTIFNAME.link_watch.interval (int)
              Value is a positive number in milliseconds. It is the interval between ARP requests
              being sent.

              Default: 1000

       link_watch.init_wait | ports.PORTIFNAME.link_watch.init_wait (int)
              Value is a positive number in milliseconds. It is  the  delay  between  link  watch
              initialization and the first ARP request being sent.

              Default: 0

       link_watch.missed_max | ports.PORTIFNAME.link_watch.missed_max (int)
              Maximum  number of missed ARP replies. If this number is exceeded, link is reported
              as down.

              Default: 3

       link_watch.source_host | ports.PORTIFNAME.link_watch.source_host (hostname)
              Hostname to be converted to IP address which will be filled  into  ARP  request  as
              source address.

              Default: 0.0.0.0

       link_watch.target_host | ports.PORTIFNAME.link_watch.target_host (hostname)
              Hostname  to  be  converted  to IP address which will be filled into ARP request as
              destination address.

       link_watch.validate_active | ports.PORTIFNAME.link_watch.validate_active (bool)
              Validate received ARP packets on active ports. If this is not set, all incoming ARP
              packets will be considered as a good reply.

              Default: false

       link_watch.validate_inactive | ports.PORTIFNAME.link_watch.validate_inactive (bool)
              Validate  received  ARP packets on inactive ports. If this is not set, all incoming
              ARP packets will be considered as a good reply.

              Default: false

       link_watch.vlanid | ports.PORTIFNAME.link_watch.vlanid (int)
              By default, ARP requests are sent without VLAN tags. This  option  causes  outgoing
              ARP requests to be sent with the specified VLAN ID number.

              Default: None

       link_watch.send_always | ports.PORTIFNAME.link_watch.send_always (bool)
              By  default, ARP requests are sent on active ports only. This option allows sending
              even on inactive ports.

              Default: false

NS/NA PING LINK WATCH SPECIFIC OPTIONS

       link_watch.interval | ports.PORTIFNAME.link_watch.interval (int)
              Value is a positive number in milliseconds. It is the interval between  sending  NS
              packets.

              Default: 1000

       link_watch.init_wait | ports.PORTIFNAME.link_watch.init_wait (int)
              Value  is  a  positive  number  in milliseconds. It is the delay between link watch
              initialization and the first NS packet being sent.

       link_watch.missed_max | ports.PORTIFNAME.link_watch.missed_max (int)
              Maximum number of missed NA reply packets. If this  number  is  exceeded,  link  is
              reported as down.

              Default: 3

       link_watch.target_host | ports.PORTIFNAME.link_watch.target_host (hostname)
              Hostname  to  be  converted  to IPv6 address which will be filled into NS packet as
              target address.

EXAMPLES

       {
         "device": "team0",
         "runner": {"name": "roundrobin"},
         "ports": {"eth1": {}, "eth2": {}}
       }

       Very basic configuration.

       {
         "device": "team0",
         "runner": {"name": "activebackup"},
         "link_watch": {"name": "ethtool"},
         "ports": {
           "eth1": {
             "prio": -10,
             "sticky": true
           },
           "eth2": {
             "prio": 100
           }
         }
       }

       This configuration uses active-backup runner with ethtool  link  watcher.  Port  eth2  has
       higher  priority, but the sticky flag ensures that if eth1 becomes active, it stays active
       while the link remains up.

       {
         "device": "team0",
         "runner": {"name": "activebackup"},
         "link_watch": {
           "name": "ethtool",
           "delay_up": 2500,
           "delay_down": 1000
         },
         "ports": {
           "eth1": {
             "prio": -10,
             "sticky": true
           },
           "eth2": {
             "prio": 100
           }
         }
       }

       Similar to the previous one. Only difference is that link changes are  not  propagated  to
       the runner immediately, but delays are applied.

       {
         "device": "team0",
         "runner": {"name": "activebackup"},
         "link_watch":     {
           "name": "arp_ping",
           "interval": 100,
           "missed_max": 30,
           "target_host": "192.168.23.1"
         },
         "ports": {
           "eth1": {
             "prio": -10,
             "sticky": true
           },
           "eth2": {
             "prio": 100
           }
         }
       }

       This configuration uses ARP ping link watch.

       {
       "device": "team0",
       "runner": {"name": "activebackup"},
       "link_watch": [
         {
           "name": "arp_ping",
           "interval": 100,
           "missed_max": 30,
           "target_host": "192.168.23.1"
         },
         {
           "name": "arp_ping",
           "interval": 50,
           "missed_max": 20,
           "target_host": "192.168.24.1"
         }
       ],
       "ports": {
         "eth1": {
           "prio": -10,
           "sticky": true
         },
         "eth2": {
           "prio": 100
           }
         }
       }

       Similar to the previous one, only this time two link watchers are used at the same time.

       {
         "device": "team0",
         "runner": {
           "name": "loadbalance",
           "tx_hash": ["eth", "ipv4", "ipv6"]
         },
         "ports": {"eth1": {}, "eth2": {}}
       }

       Configuration for hash-based passive Tx load balancing.

       {
         "device": "team0",
         "runner": {
           "name": "loadbalance",
           "tx_hash": ["eth", "ipv4", "ipv6"],
           "tx_balancer": {
             "name": "basic"
           }
         },
         "ports": {"eth1": {}, "eth2": {}}
       }

       Configuration for active Tx load balancing using basic load balancer.

       {
         "device": "team0",
         "runner": {
           "name": "lacp",
           "active": true,
           "fast_rate": true,
           "tx_hash": ["eth", "ipv4", "ipv6"]
         },
         "link_watch": {"name": "ethtool"},
         "ports": {"eth1": {}, "eth2": {}}
       }

       Configuration for connection to LACP capable counterpart.

SEE ALSO

       teamd(8), teamdctl(8), teamnl(8), bond2team(1)

AUTHOR

       Jiri Pirko is the original author and current maintainer of libteam.