Provided by: git-man_2.37.2-1ubuntu1_all 
NAME
gitcore-tutorial - A Git core tutorial for developers
SYNOPSIS
git *
DESCRIPTION
This tutorial explains how to use the "core" Git commands to set up and work with a Git
repository.
If you just need to use Git as a revision control system you may prefer to start with "A
Tutorial Introduction to Git" (gittutorial(7)) or the Git User Manual[1].
However, an understanding of these low-level tools can be helpful if you want to
understand Git’s internals.
The core Git is often called "plumbing", with the prettier user interfaces on top of it
called "porcelain". You may not want to use the plumbing directly very often, but it can
be good to know what the plumbing does when the porcelain isn’t flushing.
Back when this document was originally written, many porcelain commands were shell
scripts. For simplicity, it still uses them as examples to illustrate how plumbing is fit
together to form the porcelain commands. The source tree includes some of these scripts in
contrib/examples/ for reference. Although these are not implemented as shell scripts
anymore, the description of what the plumbing layer commands do is still valid.
Note
Deeper technical details are often marked as Notes, which you can skip on your first
reading.
CREATING A GIT REPOSITORY
Creating a new Git repository couldn’t be easier: all Git repositories start out empty,
and the only thing you need to do is find yourself a subdirectory that you want to use as
a working tree - either an empty one for a totally new project, or an existing working
tree that you want to import into Git.
For our first example, we’re going to start a totally new repository from scratch, with no
pre-existing files, and we’ll call it git-tutorial. To start up, create a subdirectory for
it, change into that subdirectory, and initialize the Git infrastructure with git init:
$ mkdir git-tutorial
$ cd git-tutorial
$ git init
to which Git will reply
Initialized empty Git repository in .git/
which is just Git’s way of saying that you haven’t been doing anything strange, and that
it will have created a local .git directory setup for your new project. You will now have
a .git directory, and you can inspect that with ls. For your new empty project, it should
show you three entries, among other things:
• a file called HEAD, that has ref: refs/heads/master in it. This is similar to a
symbolic link and points at refs/heads/master relative to the HEAD file.
Don’t worry about the fact that the file that the HEAD link points to doesn’t even
exist yet — you haven’t created the commit that will start your HEAD development
branch yet.
• a subdirectory called objects, which will contain all the objects of your project. You
should never have any real reason to look at the objects directly, but you might want
to know that these objects are what contains all the real data in your repository.
• a subdirectory called refs, which contains references to objects.
In particular, the refs subdirectory will contain two other subdirectories, named heads
and tags respectively. They do exactly what their names imply: they contain references to
any number of different heads of development (aka branches), and to any tags that you have
created to name specific versions in your repository.
One note: the special master head is the default branch, which is why the .git/HEAD file
was created points to it even if it doesn’t yet exist. Basically, the HEAD link is
supposed to always point to the branch you are working on right now, and you always start
out expecting to work on the master branch.
However, this is only a convention, and you can name your branches anything you want, and
don’t have to ever even have a master branch. A number of the Git tools will assume that
.git/HEAD is valid, though.
Note
An object is identified by its 160-bit SHA-1 hash, aka object name, and a reference to
an object is always the 40-byte hex representation of that SHA-1 name. The files in
the refs subdirectory are expected to contain these hex references (usually with a
final \n at the end), and you should thus expect to see a number of 41-byte files
containing these references in these refs subdirectories when you actually start
populating your tree.
Note
An advanced user may want to take a look at gitrepository-layout(5) after finishing
this tutorial.
You have now created your first Git repository. Of course, since it’s empty, that’s not
very useful, so let’s start populating it with data.
POPULATING A GIT REPOSITORY
We’ll keep this simple and stupid, so we’ll start off with populating a few trivial files
just to get a feel for it.
Start off with just creating any random files that you want to maintain in your Git
repository. We’ll start off with a few bad examples, just to get a feel for how this
works:
$ echo "Hello World" >hello
$ echo "Silly example" >example
you have now created two files in your working tree (aka working directory), but to
actually check in your hard work, you will have to go through two steps:
• fill in the index file (aka cache) with the information about your working tree state.
• commit that index file as an object.
The first step is trivial: when you want to tell Git about any changes to your working
tree, you use the git update-index program. That program normally just takes a list of
filenames you want to update, but to avoid trivial mistakes, it refuses to add new entries
to the index (or remove existing ones) unless you explicitly tell it that you’re adding a
new entry with the --add flag (or removing an entry with the --remove) flag.
So to populate the index with the two files you just created, you can do
$ git update-index --add hello example
and you have now told Git to track those two files.
In fact, as you did that, if you now look into your object directory, you’ll notice that
Git will have added two new objects to the object database. If you did exactly the steps
above, you should now be able to do
$ ls .git/objects/??/*
and see two files:
.git/objects/55/7db03de997c86a4a028e1ebd3a1ceb225be238
.git/objects/f2/4c74a2e500f5ee1332c86b94199f52b1d1d962
which correspond with the objects with names of 557db... and f24c7... respectively.
If you want to, you can use git cat-file to look at those objects, but you’ll have to use
the object name, not the filename of the object:
$ git cat-file -t 557db03de997c86a4a028e1ebd3a1ceb225be238
where the -t tells git cat-file to tell you what the "type" of the object is. Git will
tell you that you have a "blob" object (i.e., just a regular file), and you can see the
contents with
$ git cat-file blob 557db03
which will print out "Hello World". The object 557db03 is nothing more than the contents
of your file hello.
Note
Don’t confuse that object with the file hello itself. The object is literally just
those specific contents of the file, and however much you later change the contents in
file hello, the object we just looked at will never change. Objects are immutable.
Note
The second example demonstrates that you can abbreviate the object name to only the
first several hexadecimal digits in most places.
Anyway, as we mentioned previously, you normally never actually take a look at the objects
themselves, and typing long 40-character hex names is not something you’d normally want to
do. The above digression was just to show that git update-index did something magical, and
actually saved away the contents of your files into the Git object database.
Updating the index did something else too: it created a .git/index file. This is the index
that describes your current working tree, and something you should be very aware of.
Again, you normally never worry about the index file itself, but you should be aware of
the fact that you have not actually really "checked in" your files into Git so far, you’ve
only told Git about them.
However, since Git knows about them, you can now start using some of the most basic Git
commands to manipulate the files or look at their status.
In particular, let’s not even check in the two files into Git yet, we’ll start off by
adding another line to hello first:
$ echo "It's a new day for git" >>hello
and you can now, since you told Git about the previous state of hello, ask Git what has
changed in the tree compared to your old index, using the git diff-files command:
$ git diff-files
Oops. That wasn’t very readable. It just spit out its own internal version of a diff, but
that internal version really just tells you that it has noticed that "hello" has been
modified, and that the old object contents it had have been replaced with something else.
To make it readable, we can tell git diff-files to output the differences as a patch,
using the -p flag:
$ git diff-files -p
diff --git a/hello b/hello
index 557db03..263414f 100644
--- a/hello
+++ b/hello
@@ -1 +1,2 @@
Hello World
+It's a new day for git
i.e. the diff of the change we caused by adding another line to hello.
In other words, git diff-files always shows us the difference between what is recorded in
the index, and what is currently in the working tree. That’s very useful.
A common shorthand for git diff-files -p is to just write git diff, which will do the same
thing.
$ git diff
diff --git a/hello b/hello
index 557db03..263414f 100644
--- a/hello
+++ b/hello
@@ -1 +1,2 @@
Hello World
+It's a new day for git
COMMITTING GIT STATE
Now, we want to go to the next stage in Git, which is to take the files that Git knows
about in the index, and commit them as a real tree. We do that in two phases: creating a
tree object, and committing that tree object as a commit object together with an
explanation of what the tree was all about, along with information of how we came to that
state.
Creating a tree object is trivial, and is done with git write-tree. There are no options
or other input: git write-tree will take the current index state, and write an object that
describes that whole index. In other words, we’re now tying together all the different
filenames with their contents (and their permissions), and we’re creating the equivalent
of a Git "directory" object:
$ git write-tree
and this will just output the name of the resulting tree, in this case (if you have done
exactly as I’ve described) it should be
8988da15d077d4829fc51d8544c097def6644dbb
which is another incomprehensible object name. Again, if you want to, you can use git
cat-file -t 8988d... to see that this time the object is not a "blob" object, but a "tree"
object (you can also use git cat-file to actually output the raw object contents, but
you’ll see mainly a binary mess, so that’s less interesting).
However — normally you’d never use git write-tree on its own, because normally you always
commit a tree into a commit object using the git commit-tree command. In fact, it’s easier
to not actually use git write-tree on its own at all, but to just pass its result in as an
argument to git commit-tree.
git commit-tree normally takes several arguments — it wants to know what the parent of a
commit was, but since this is the first commit ever in this new repository, and it has no
parents, we only need to pass in the object name of the tree. However, git commit-tree
also wants to get a commit message on its standard input, and it will write out the
resulting object name for the commit to its standard output.
And this is where we create the .git/refs/heads/master file which is pointed at by HEAD.
This file is supposed to contain the reference to the top-of-tree of the master branch,
and since that’s exactly what git commit-tree spits out, we can do this all with a
sequence of simple shell commands:
$ tree=$(git write-tree)
$ commit=$(echo 'Initial commit' | git commit-tree $tree)
$ git update-ref HEAD $commit
In this case this creates a totally new commit that is not related to anything else.
Normally you do this only once for a project ever, and all later commits will be parented
on top of an earlier commit.
Again, normally you’d never actually do this by hand. There is a helpful script called git
commit that will do all of this for you. So you could have just written git commit
instead, and it would have done the above magic scripting for you.
MAKING A CHANGE
Remember how we did the git update-index on file hello and then we changed hello
afterward, and could compare the new state of hello with the state we saved in the index
file?
Further, remember how I said that git write-tree writes the contents of the index file to
the tree, and thus what we just committed was in fact the original contents of the file
hello, not the new ones. We did that on purpose, to show the difference between the index
state, and the state in the working tree, and how they don’t have to match, even when we
commit things.
As before, if we do git diff-files -p in our git-tutorial project, we’ll still see the
same difference we saw last time: the index file hasn’t changed by the act of committing
anything. However, now that we have committed something, we can also learn to use a new
command: git diff-index.
Unlike git diff-files, which showed the difference between the index file and the working
tree, git diff-index shows the differences between a committed tree and either the index
file or the working tree. In other words, git diff-index wants a tree to be diffed
against, and before we did the commit, we couldn’t do that, because we didn’t have
anything to diff against.
But now we can do
$ git diff-index -p HEAD
(where -p has the same meaning as it did in git diff-files), and it will show us the same
difference, but for a totally different reason. Now we’re comparing the working tree not
against the index file, but against the tree we just wrote. It just so happens that those
two are obviously the same, so we get the same result.
Again, because this is a common operation, you can also just shorthand it with
$ git diff HEAD
which ends up doing the above for you.
In other words, git diff-index normally compares a tree against the working tree, but when
given the --cached flag, it is told to instead compare against just the index cache
contents, and ignore the current working tree state entirely. Since we just wrote the
index file to HEAD, doing git diff-index --cached -p HEAD should thus return an empty set
of differences, and that’s exactly what it does.
Note
git diff-index really always uses the index for its comparisons, and saying that it
compares a tree against the working tree is thus not strictly accurate. In particular,
the list of files to compare (the "meta-data") always comes from the index file,
regardless of whether the --cached flag is used or not. The --cached flag really only
determines whether the file contents to be compared come from the working tree or not.
This is not hard to understand, as soon as you realize that Git simply never knows (or
cares) about files that it is not told about explicitly. Git will never go looking for
files to compare, it expects you to tell it what the files are, and that’s what the
index is there for.
However, our next step is to commit the change we did, and again, to understand what’s
going on, keep in mind the difference between "working tree contents", "index file" and
"committed tree". We have changes in the working tree that we want to commit, and we
always have to work through the index file, so the first thing we need to do is to update
the index cache:
$ git update-index hello
(note how we didn’t need the --add flag this time, since Git knew about the file already).
Note what happens to the different git diff-* versions here. After we’ve updated hello in
the index, git diff-files -p now shows no differences, but git diff-index -p HEAD still
does show that the current state is different from the state we committed. In fact, now
git diff-index shows the same difference whether we use the --cached flag or not, since
now the index is coherent with the working tree.
Now, since we’ve updated hello in the index, we can commit the new version. We could do it
by writing the tree by hand again, and committing the tree (this time we’d have to use the
-p HEAD flag to tell commit that the HEAD was the parent of the new commit, and that this
wasn’t an initial commit any more), but you’ve done that once already, so let’s just use
the helpful script this time:
$ git commit
which starts an editor for you to write the commit message and tells you a bit about what
you have done.
Write whatever message you want, and all the lines that start with # will be pruned out,
and the rest will be used as the commit message for the change. If you decide you don’t
want to commit anything after all at this point (you can continue to edit things and
update the index), you can just leave an empty message. Otherwise git commit will commit
the change for you.
You’ve now made your first real Git commit. And if you’re interested in looking at what
git commit really does, feel free to investigate: it’s a few very simple shell scripts to
generate the helpful (?) commit message headers, and a few one-liners that actually do the
commit itself (git commit).
INSPECTING CHANGES
While creating changes is useful, it’s even more useful if you can tell later what
changed. The most useful command for this is another of the diff family, namely git
diff-tree.
git diff-tree can be given two arbitrary trees, and it will tell you the differences
between them. Perhaps even more commonly, though, you can give it just a single commit
object, and it will figure out the parent of that commit itself, and show the difference
directly. Thus, to get the same diff that we’ve already seen several times, we can now do
$ git diff-tree -p HEAD
(again, -p means to show the difference as a human-readable patch), and it will show what
the last commit (in HEAD) actually changed.
Note
Here is an ASCII art by Jon Loeliger that illustrates how various diff-* commands
compare things.
diff-tree
+----+
| |
| |
V V
+-----------+
| Object DB |
| Backing |
| Store |
+-----------+
^ ^
| |
| | diff-index --cached
| |
diff-index | V
| +-----------+
| | Index |
| | "cache" |
| +-----------+
| ^
| |
| | diff-files
| |
V V
+-----------+
| Working |
| Directory |
+-----------+
More interestingly, you can also give git diff-tree the --pretty flag, which tells it to
also show the commit message and author and date of the commit, and you can tell it to
show a whole series of diffs. Alternatively, you can tell it to be "silent", and not show
the diffs at all, but just show the actual commit message.
In fact, together with the git rev-list program (which generates a list of revisions), git
diff-tree ends up being a veritable fount of changes. You can emulate git log, git log -p,
etc. with a trivial script that pipes the output of git rev-list to git diff-tree --stdin,
which was exactly how early versions of git log were implemented.
TAGGING A VERSION
In Git, there are two kinds of tags, a "light" one, and an "annotated tag".
A "light" tag is technically nothing more than a branch, except we put it in the
.git/refs/tags/ subdirectory instead of calling it a head. So the simplest form of tag
involves nothing more than
$ git tag my-first-tag
which just writes the current HEAD into the .git/refs/tags/my-first-tag file, after which
point you can then use this symbolic name for that particular state. You can, for example,
do
$ git diff my-first-tag
to diff your current state against that tag which at this point will obviously be an empty
diff, but if you continue to develop and commit stuff, you can use your tag as an
"anchor-point" to see what has changed since you tagged it.
An "annotated tag" is actually a real Git object, and contains not only a pointer to the
state you want to tag, but also a small tag name and message, along with optionally a PGP
signature that says that yes, you really did that tag. You create these annotated tags
with either the -a or -s flag to git tag:
$ git tag -s <tagname>
which will sign the current HEAD (but you can also give it another argument that specifies
the thing to tag, e.g., you could have tagged the current mybranch point by using git tag
<tagname> mybranch).
You normally only do signed tags for major releases or things like that, while the
light-weight tags are useful for any marking you want to do — any time you decide that you
want to remember a certain point, just create a private tag for it, and you have a nice
symbolic name for the state at that point.
COPYING REPOSITORIES
Git repositories are normally totally self-sufficient and relocatable. Unlike CVS, for
example, there is no separate notion of "repository" and "working tree". A Git repository
normally is the working tree, with the local Git information hidden in the .git
subdirectory. There is nothing else. What you see is what you got.
Note
You can tell Git to split the Git internal information from the directory that it
tracks, but we’ll ignore that for now: it’s not how normal projects work, and it’s
really only meant for special uses. So the mental model of "the Git information is
always tied directly to the working tree that it describes" may not be technically
100% accurate, but it’s a good model for all normal use.
This has two implications:
• if you grow bored with the tutorial repository you created (or you’ve made a mistake
and want to start all over), you can just do simple
$ rm -rf git-tutorial
and it will be gone. There’s no external repository, and there’s no history outside
the project you created.
• if you want to move or duplicate a Git repository, you can do so. There is git clone
command, but if all you want to do is just to create a copy of your repository (with
all the full history that went along with it), you can do so with a regular cp -a
git-tutorial new-git-tutorial.
Note that when you’ve moved or copied a Git repository, your Git index file (which
caches various information, notably some of the "stat" information for the files
involved) will likely need to be refreshed. So after you do a cp -a to create a new
copy, you’ll want to do
$ git update-index --refresh
in the new repository to make sure that the index file is up to date.
Note that the second point is true even across machines. You can duplicate a remote Git
repository with any regular copy mechanism, be it scp, rsync or wget.
When copying a remote repository, you’ll want to at a minimum update the index cache when
you do this, and especially with other peoples' repositories you often want to make sure
that the index cache is in some known state (you don’t know what they’ve done and not yet
checked in), so usually you’ll precede the git update-index with a
$ git read-tree --reset HEAD
$ git update-index --refresh
which will force a total index re-build from the tree pointed to by HEAD. It resets the
index contents to HEAD, and then the git update-index makes sure to match up all index
entries with the checked-out files. If the original repository had uncommitted changes in
its working tree, git update-index --refresh notices them and tells you they need to be
updated.
The above can also be written as simply
$ git reset
and in fact a lot of the common Git command combinations can be scripted with the git xyz
interfaces. You can learn things by just looking at what the various git scripts do. For
example, git reset used to be the above two lines implemented in git reset, but some
things like git status and git commit are slightly more complex scripts around the basic
Git commands.
Many (most?) public remote repositories will not contain any of the checked out files or
even an index file, and will only contain the actual core Git files. Such a repository
usually doesn’t even have the .git subdirectory, but has all the Git files directly in the
repository.
To create your own local live copy of such a "raw" Git repository, you’d first create your
own subdirectory for the project, and then copy the raw repository contents into the .git
directory. For example, to create your own copy of the Git repository, you’d do the
following
$ mkdir my-git
$ cd my-git
$ rsync -rL rsync://rsync.kernel.org/pub/scm/git/git.git/ .git
followed by
$ git read-tree HEAD
to populate the index. However, now you have populated the index, and you have all the Git
internal files, but you will notice that you don’t actually have any of the working tree
files to work on. To get those, you’d check them out with
$ git checkout-index -u -a
where the -u flag means that you want the checkout to keep the index up to date (so that
you don’t have to refresh it afterward), and the -a flag means "check out all files" (if
you have a stale copy or an older version of a checked out tree you may also need to add
the -f flag first, to tell git checkout-index to force overwriting of any old files).
Again, this can all be simplified with
$ git clone git://git.kernel.org/pub/scm/git/git.git/ my-git
$ cd my-git
$ git checkout
which will end up doing all of the above for you.
You have now successfully copied somebody else’s (mine) remote repository, and checked it
out.
CREATING A NEW BRANCH
Branches in Git are really nothing more than pointers into the Git object database from
within the .git/refs/ subdirectory, and as we already discussed, the HEAD branch is
nothing but a symlink to one of these object pointers.
You can at any time create a new branch by just picking an arbitrary point in the project
history, and just writing the SHA-1 name of that object into a file under
.git/refs/heads/. You can use any filename you want (and indeed, subdirectories), but the
convention is that the "normal" branch is called master. That’s just a convention, though,
and nothing enforces it.
To show that as an example, let’s go back to the git-tutorial repository we used earlier,
and create a branch in it. You do that by simply just saying that you want to check out a
new branch:
$ git switch -c mybranch
will create a new branch based at the current HEAD position, and switch to it.
Note
If you make the decision to start your new branch at some other point in the history
than the current HEAD, you can do so by just telling git switch what the base of the
checkout would be. In other words, if you have an earlier tag or branch, you’d just do
$ git switch -c mybranch earlier-commit
and it would create the new branch mybranch at the earlier commit, and check out the
state at that time.
You can always just jump back to your original master branch by doing
$ git switch master
(or any other branch-name, for that matter) and if you forget which branch you happen to
be on, a simple
$ cat .git/HEAD
will tell you where it’s pointing. To get the list of branches you have, you can say
$ git branch
which used to be nothing more than a simple script around ls .git/refs/heads. There will
be an asterisk in front of the branch you are currently on.
Sometimes you may wish to create a new branch without actually checking it out and
switching to it. If so, just use the command
$ git branch <branchname> [startingpoint]
which will simply create the branch, but will not do anything further. You can then later
— once you decide that you want to actually develop on that branch — switch to that branch
with a regular git switch with the branchname as the argument.
MERGING TWO BRANCHES
One of the ideas of having a branch is that you do some (possibly experimental) work in
it, and eventually merge it back to the main branch. So assuming you created the above
mybranch that started out being the same as the original master branch, let’s make sure
we’re in that branch, and do some work there.
$ git switch mybranch
$ echo "Work, work, work" >>hello
$ git commit -m "Some work." -i hello
Here, we just added another line to hello, and we used a shorthand for doing both git
update-index hello and git commit by just giving the filename directly to git commit, with
an -i flag (it tells Git to include that file in addition to what you have done to the
index file so far when making the commit). The -m flag is to give the commit log message
from the command line.
Now, to make it a bit more interesting, let’s assume that somebody else does some work in
the original branch, and simulate that by going back to the master branch, and editing the
same file differently there:
$ git switch master
Here, take a moment to look at the contents of hello, and notice how they don’t contain
the work we just did in mybranch — because that work hasn’t happened in the master branch
at all. Then do
$ echo "Play, play, play" >>hello
$ echo "Lots of fun" >>example
$ git commit -m "Some fun." -i hello example
since the master branch is obviously in a much better mood.
Now, you’ve got two branches, and you decide that you want to merge the work done. Before
we do that, let’s introduce a cool graphical tool that helps you view what’s going on:
$ gitk --all
will show you graphically both of your branches (that’s what the --all means: normally it
will just show you your current HEAD) and their histories. You can also see exactly how
they came to be from a common source.
Anyway, let’s exit gitk (^Q or the File menu), and decide that we want to merge the work
we did on the mybranch branch into the master branch (which is currently our HEAD too). To
do that, there’s a nice script called git merge, which wants to know which branches you
want to resolve and what the merge is all about:
$ git merge -m "Merge work in mybranch" mybranch
where the first argument is going to be used as the commit message if the merge can be
resolved automatically.
Now, in this case we’ve intentionally created a situation where the merge will need to be
fixed up by hand, though, so Git will do as much of it as it can automatically (which in
this case is just merge the example file, which had no differences in the mybranch
branch), and say:
Auto-merging hello
CONFLICT (content): Merge conflict in hello
Automatic merge failed; fix conflicts and then commit the result.
It tells you that it did an "Automatic merge", which failed due to conflicts in hello.
Not to worry. It left the (trivial) conflict in hello in the same form you should already
be well used to if you’ve ever used CVS, so let’s just open hello in our editor (whatever
that may be), and fix it up somehow. I’d suggest just making it so that hello contains all
four lines:
Hello World
It's a new day for git
Play, play, play
Work, work, work
and once you’re happy with your manual merge, just do a
$ git commit -i hello
which will very loudly warn you that you’re now committing a merge (which is correct, so
never mind), and you can write a small merge message about your adventures in git
merge-land.
After you’re done, start up gitk --all to see graphically what the history looks like.
Notice that mybranch still exists, and you can switch to it, and continue to work with it
if you want to. The mybranch branch will not contain the merge, but next time you merge it
from the master branch, Git will know how you merged it, so you’ll not have to do that
merge again.
Another useful tool, especially if you do not always work in X-Window environment, is git
show-branch.
$ git show-branch --topo-order --more=1 master mybranch
* [master] Merge work in mybranch
! [mybranch] Some work.
--
- [master] Merge work in mybranch
*+ [mybranch] Some work.
* [master^] Some fun.
The first two lines indicate that it is showing the two branches with the titles of their
top-of-the-tree commits, you are currently on master branch (notice the asterisk *
character), and the first column for the later output lines is used to show commits
contained in the master branch, and the second column for the mybranch branch. Three
commits are shown along with their titles. All of them have non blank characters in the
first column (* shows an ordinary commit on the current branch, - is a merge commit),
which means they are now part of the master branch. Only the "Some work" commit has the
plus + character in the second column, because mybranch has not been merged to incorporate
these commits from the master branch. The string inside brackets before the commit log
message is a short name you can use to name the commit. In the above example, master and
mybranch are branch heads. master^ is the first parent of master branch head. Please see
gitrevisions(7) if you want to see more complex cases.
Note
Without the --more=1 option, git show-branch would not output the [master^] commit, as
[mybranch] commit is a common ancestor of both master and mybranch tips. Please see
git-show-branch(1) for details.
Note
If there were more commits on the master branch after the merge, the merge commit
itself would not be shown by git show-branch by default. You would need to provide
--sparse option to make the merge commit visible in this case.
Now, let’s pretend you are the one who did all the work in mybranch, and the fruit of your
hard work has finally been merged to the master branch. Let’s go back to mybranch, and run
git merge to get the "upstream changes" back to your branch.
$ git switch mybranch
$ git merge -m "Merge upstream changes." master
This outputs something like this (the actual commit object names would be different)
Updating from ae3a2da... to a80b4aa....
Fast-forward (no commit created; -m option ignored)
example | 1 +
hello | 1 +
2 files changed, 2 insertions(+)
Because your branch did not contain anything more than what had already been merged into
the master branch, the merge operation did not actually do a merge. Instead, it just
updated the top of the tree of your branch to that of the master branch. This is often
called fast-forward merge.
You can run gitk --all again to see how the commit ancestry looks like, or run
show-branch, which tells you this.
$ git show-branch master mybranch
! [master] Merge work in mybranch
* [mybranch] Merge work in mybranch
--
-- [master] Merge work in mybranch
MERGING EXTERNAL WORK
It’s usually much more common that you merge with somebody else than merging with your own
branches, so it’s worth pointing out that Git makes that very easy too, and in fact, it’s
not that different from doing a git merge. In fact, a remote merge ends up being nothing
more than "fetch the work from a remote repository into a temporary tag" followed by a git
merge.
Fetching from a remote repository is done by, unsurprisingly, git fetch:
$ git fetch <remote-repository>
One of the following transports can be used to name the repository to download from:
SSH
remote.machine:/path/to/repo.git/ or
ssh://remote.machine/path/to/repo.git/
This transport can be used for both uploading and downloading, and requires you to
have a log-in privilege over ssh to the remote machine. It finds out the set of
objects the other side lacks by exchanging the head commits both ends have and
transfers (close to) minimum set of objects. It is by far the most efficient way to
exchange Git objects between repositories.
Local directory
/path/to/repo.git/
This transport is the same as SSH transport but uses sh to run both ends on the local
machine instead of running other end on the remote machine via ssh.
Git Native
git://remote.machine/path/to/repo.git/
This transport was designed for anonymous downloading. Like SSH transport, it finds
out the set of objects the downstream side lacks and transfers (close to) minimum set
of objects.
HTTP(S)
http://remote.machine/path/to/repo.git/
Downloader from http and https URL first obtains the topmost commit object name from
the remote site by looking at the specified refname under repo.git/refs/ directory,
and then tries to obtain the commit object by downloading from
repo.git/objects/xx/xxx... using the object name of that commit object. Then it reads
the commit object to find out its parent commits and the associate tree object; it
repeats this process until it gets all the necessary objects. Because of this
behavior, they are sometimes also called commit walkers.
The commit walkers are sometimes also called dumb transports, because they do not
require any Git aware smart server like Git Native transport does. Any stock HTTP
server that does not even support directory index would suffice. But you must prepare
your repository with git update-server-info to help dumb transport downloaders.
Once you fetch from the remote repository, you merge that with your current branch.
However — it’s such a common thing to fetch and then immediately merge, that it’s called
git pull, and you can simply do
$ git pull <remote-repository>
and optionally give a branch-name for the remote end as a second argument.
Note
You could do without using any branches at all, by keeping as many local repositories
as you would like to have branches, and merging between them with git pull, just like
you merge between branches. The advantage of this approach is that it lets you keep a
set of files for each branch checked out and you may find it easier to switch back and
forth if you juggle multiple lines of development simultaneously. Of course, you will
pay the price of more disk usage to hold multiple working trees, but disk space is
cheap these days.
It is likely that you will be pulling from the same remote repository from time to time.
As a short hand, you can store the remote repository URL in the local repository’s config
file like this:
$ git config remote.linus.url http://www.kernel.org/pub/scm/git/git.git/
and use the "linus" keyword with git pull instead of the full URL.
Examples.
1. git pull linus
2. git pull linus tag v0.99.1
the above are equivalent to:
1. git pull http://www.kernel.org/pub/scm/git/git.git/ HEAD
2. git pull http://www.kernel.org/pub/scm/git/git.git/ tag v0.99.1
HOW DOES THE MERGE WORK?
We said this tutorial shows what plumbing does to help you cope with the porcelain that
isn’t flushing, but we so far did not talk about how the merge really works. If you are
following this tutorial the first time, I’d suggest to skip to "Publishing your work"
section and come back here later.
OK, still with me? To give us an example to look at, let’s go back to the earlier
repository with "hello" and "example" file, and bring ourselves back to the pre-merge
state:
$ git show-branch --more=2 master mybranch
! [master] Merge work in mybranch
* [mybranch] Merge work in mybranch
--
-- [master] Merge work in mybranch
+* [master^2] Some work.
+* [master^] Some fun.
Remember, before running git merge, our master head was at "Some fun." commit, while our
mybranch head was at "Some work." commit.
$ git switch -C mybranch master^2
$ git switch master
$ git reset --hard master^
After rewinding, the commit structure should look like this:
$ git show-branch
* [master] Some fun.
! [mybranch] Some work.
--
* [master] Some fun.
+ [mybranch] Some work.
*+ [master^] Initial commit
Now we are ready to experiment with the merge by hand.
git merge command, when merging two branches, uses 3-way merge algorithm. First, it finds
the common ancestor between them. The command it uses is git merge-base:
$ mb=$(git merge-base HEAD mybranch)
The command writes the commit object name of the common ancestor to the standard output,
so we captured its output to a variable, because we will be using it in the next step. By
the way, the common ancestor commit is the "Initial commit" commit in this case. You can
tell it by:
$ git name-rev --name-only --tags $mb
my-first-tag
After finding out a common ancestor commit, the second step is this:
$ git read-tree -m -u $mb HEAD mybranch
This is the same git read-tree command we have already seen, but it takes three trees,
unlike previous examples. This reads the contents of each tree into different stage in the
index file (the first tree goes to stage 1, the second to stage 2, etc.). After reading
three trees into three stages, the paths that are the same in all three stages are
collapsed into stage 0. Also paths that are the same in two of three stages are collapsed
into stage 0, taking the SHA-1 from either stage 2 or stage 3, whichever is different from
stage 1 (i.e. only one side changed from the common ancestor).
After collapsing operation, paths that are different in three trees are left in non-zero
stages. At this point, you can inspect the index file with this command:
$ git ls-files --stage
100644 7f8b141b65fdcee47321e399a2598a235a032422 0 example
100644 557db03de997c86a4a028e1ebd3a1ceb225be238 1 hello
100644 ba42a2a96e3027f3333e13ede4ccf4498c3ae942 2 hello
100644 cc44c73eb783565da5831b4d820c962954019b69 3 hello
In our example of only two files, we did not have unchanged files so only example resulted
in collapsing. But in real-life large projects, when only a small number of files change
in one commit, this collapsing tends to trivially merge most of the paths fairly quickly,
leaving only a handful of real changes in non-zero stages.
To look at only non-zero stages, use --unmerged flag:
$ git ls-files --unmerged
100644 557db03de997c86a4a028e1ebd3a1ceb225be238 1 hello
100644 ba42a2a96e3027f3333e13ede4ccf4498c3ae942 2 hello
100644 cc44c73eb783565da5831b4d820c962954019b69 3 hello
The next step of merging is to merge these three versions of the file, using 3-way merge.
This is done by giving git merge-one-file command as one of the arguments to git
merge-index command:
$ git merge-index git-merge-one-file hello
Auto-merging hello
ERROR: Merge conflict in hello
fatal: merge program failed
git merge-one-file script is called with parameters to describe those three versions, and
is responsible to leave the merge results in the working tree. It is a fairly
straightforward shell script, and eventually calls merge program from RCS suite to perform
a file-level 3-way merge. In this case, merge detects conflicts, and the merge result with
conflict marks is left in the working tree.. This can be seen if you run ls-files --stage
again at this point:
$ git ls-files --stage
100644 7f8b141b65fdcee47321e399a2598a235a032422 0 example
100644 557db03de997c86a4a028e1ebd3a1ceb225be238 1 hello
100644 ba42a2a96e3027f3333e13ede4ccf4498c3ae942 2 hello
100644 cc44c73eb783565da5831b4d820c962954019b69 3 hello
This is the state of the index file and the working file after git merge returns control
back to you, leaving the conflicting merge for you to resolve. Notice that the path hello
is still unmerged, and what you see with git diff at this point is differences since stage
2 (i.e. your version).
PUBLISHING YOUR WORK
So, we can use somebody else’s work from a remote repository, but how can you prepare a
repository to let other people pull from it?
You do your real work in your working tree that has your primary repository hanging under
it as its .git subdirectory. You could make that repository accessible remotely and ask
people to pull from it, but in practice that is not the way things are usually done. A
recommended way is to have a public repository, make it reachable by other people, and
when the changes you made in your primary working tree are in good shape, update the
public repository from it. This is often called pushing.
Note
This public repository could further be mirrored, and that is how Git repositories at
kernel.org are managed.
Publishing the changes from your local (private) repository to your remote (public)
repository requires a write privilege on the remote machine. You need to have an SSH
account there to run a single command, git-receive-pack.
First, you need to create an empty repository on the remote machine that will house your
public repository. This empty repository will be populated and be kept up to date by
pushing into it later. Obviously, this repository creation needs to be done only once.
Note
git push uses a pair of commands, git send-pack on your local machine, and
git-receive-pack on the remote machine. The communication between the two over the
network internally uses an SSH connection.
Your private repository’s Git directory is usually .git, but your public repository is
often named after the project name, i.e. <project>.git. Let’s create such a public
repository for project my-git. After logging into the remote machine, create an empty
directory:
$ mkdir my-git.git
Then, make that directory into a Git repository by running git init, but this time, since
its name is not the usual .git, we do things slightly differently:
$ GIT_DIR=my-git.git git init
Make sure this directory is available for others you want your changes to be pulled via
the transport of your choice. Also you need to make sure that you have the
git-receive-pack program on the $PATH.
Note
Many installations of sshd do not invoke your shell as the login shell when you
directly run programs; what this means is that if your login shell is bash, only
.bashrc is read and not .bash_profile. As a workaround, make sure .bashrc sets up
$PATH so that you can run git-receive-pack program.
Note
If you plan to publish this repository to be accessed over http, you should do mv
my-git.git/hooks/post-update.sample my-git.git/hooks/post-update at this point. This
makes sure that every time you push into this repository, git update-server-info is
run.
Your "public repository" is now ready to accept your changes. Come back to the machine you
have your private repository. From there, run this command:
$ git push <public-host>:/path/to/my-git.git master
This synchronizes your public repository to match the named branch head (i.e. master in
this case) and objects reachable from them in your current repository.
As a real example, this is how I update my public Git repository. Kernel.org mirror
network takes care of the propagation to other publicly visible machines:
$ git push master.kernel.org:/pub/scm/git/git.git/
PACKING YOUR REPOSITORY
Earlier, we saw that one file under .git/objects/??/ directory is stored for each Git
object you create. This representation is efficient to create atomically and safely, but
not so convenient to transport over the network. Since Git objects are immutable once they
are created, there is a way to optimize the storage by "packing them together". The
command
$ git repack
will do it for you. If you followed the tutorial examples, you would have accumulated
about 17 objects in .git/objects/??/ directories by now. git repack tells you how many
objects it packed, and stores the packed file in the .git/objects/pack directory.
Note
You will see two files, pack-*.pack and pack-*.idx, in .git/objects/pack directory.
They are closely related to each other, and if you ever copy them by hand to a
different repository for whatever reason, you should make sure you copy them together.
The former holds all the data from the objects in the pack, and the latter holds the
index for random access.
If you are paranoid, running git verify-pack command would detect if you have a corrupt
pack, but do not worry too much. Our programs are always perfect ;-).
Once you have packed objects, you do not need to leave the unpacked objects that are
contained in the pack file anymore.
$ git prune-packed
would remove them for you.
You can try running find .git/objects -type f before and after you run git prune-packed if
you are curious. Also git count-objects would tell you how many unpacked objects are in
your repository and how much space they are consuming.
Note
git pull is slightly cumbersome for HTTP transport, as a packed repository may contain
relatively few objects in a relatively large pack. If you expect many HTTP pulls from
your public repository you might want to repack & prune often, or never.
If you run git repack again at this point, it will say "Nothing new to pack.". Once you
continue your development and accumulate the changes, running git repack again will create
a new pack, that contains objects created since you packed your repository the last time.
We recommend that you pack your project soon after the initial import (unless you are
starting your project from scratch), and then run git repack every once in a while,
depending on how active your project is.
When a repository is synchronized via git push and git pull objects packed in the source
repository are usually stored unpacked in the destination. While this allows you to use
different packing strategies on both ends, it also means you may need to repack both
repositories every once in a while.
WORKING WITH OTHERS
Although Git is a truly distributed system, it is often convenient to organize your
project with an informal hierarchy of developers. Linux kernel development is run this
way. There is a nice illustration (page 17, "Merges to Mainline") in Randy Dunlap’s
presentation[2].
It should be stressed that this hierarchy is purely informal. There is nothing fundamental
in Git that enforces the "chain of patch flow" this hierarchy implies. You do not have to
pull from only one remote repository.
A recommended workflow for a "project lead" goes like this:
1. Prepare your primary repository on your local machine. Your work is done there.
2. Prepare a public repository accessible to others.
If other people are pulling from your repository over dumb transport protocols (HTTP),
you need to keep this repository dumb transport friendly. After git init,
$GIT_DIR/hooks/post-update.sample copied from the standard templates would contain a
call to git update-server-info but you need to manually enable the hook with mv
post-update.sample post-update. This makes sure git update-server-info keeps the
necessary files up to date.
3. Push into the public repository from your primary repository.
4. git repack the public repository. This establishes a big pack that contains the
initial set of objects as the baseline, and possibly git prune if the transport used
for pulling from your repository supports packed repositories.
5. Keep working in your primary repository. Your changes include modifications of your
own, patches you receive via e-mails, and merges resulting from pulling the "public"
repositories of your "subsystem maintainers".
You can repack this private repository whenever you feel like.
6. Push your changes to the public repository, and announce it to the public.
7. Every once in a while, git repack the public repository. Go back to step 5. and
continue working.
A recommended work cycle for a "subsystem maintainer" who works on that project and has an
own "public repository" goes like this:
1. Prepare your work repository, by running git clone on the public repository of the
"project lead". The URL used for the initial cloning is stored in the
remote.origin.url configuration variable.
2. Prepare a public repository accessible to others, just like the "project lead" person
does.
3. Copy over the packed files from "project lead" public repository to your public
repository, unless the "project lead" repository lives on the same machine as yours.
In the latter case, you can use objects/info/alternates file to point at the
repository you are borrowing from.
4. Push into the public repository from your primary repository. Run git repack, and
possibly git prune if the transport used for pulling from your repository supports
packed repositories.
5. Keep working in your primary repository. Your changes include modifications of your
own, patches you receive via e-mails, and merges resulting from pulling the "public"
repositories of your "project lead" and possibly your "sub-subsystem maintainers".
You can repack this private repository whenever you feel like.
6. Push your changes to your public repository, and ask your "project lead" and possibly
your "sub-subsystem maintainers" to pull from it.
7. Every once in a while, git repack the public repository. Go back to step 5. and
continue working.
A recommended work cycle for an "individual developer" who does not have a "public"
repository is somewhat different. It goes like this:
1. Prepare your work repository, by git clone the public repository of the "project lead"
(or a "subsystem maintainer", if you work on a subsystem). The URL used for the
initial cloning is stored in the remote.origin.url configuration variable.
2. Do your work in your repository on master branch.
3. Run git fetch origin from the public repository of your upstream every once in a
while. This does only the first half of git pull but does not merge. The head of the
public repository is stored in .git/refs/remotes/origin/master.
4. Use git cherry origin to see which ones of your patches were accepted, and/or use git
rebase origin to port your unmerged changes forward to the updated upstream.
5. Use git format-patch origin to prepare patches for e-mail submission to your upstream
and send it out. Go back to step 2. and continue.
WORKING WITH OTHERS, SHARED REPOSITORY STYLE
If you are coming from a CVS background, the style of cooperation suggested in the
previous section may be new to you. You do not have to worry. Git supports the "shared
public repository" style of cooperation you are probably more familiar with as well.
See gitcvs-migration(7) for the details.
BUNDLING YOUR WORK TOGETHER
It is likely that you will be working on more than one thing at a time. It is easy to
manage those more-or-less independent tasks using branches with Git.
We have already seen how branches work previously, with "fun and work" example using two
branches. The idea is the same if there are more than two branches. Let’s say you started
out from "master" head, and have some new code in the "master" branch, and two independent
fixes in the "commit-fix" and "diff-fix" branches:
$ git show-branch
! [commit-fix] Fix commit message normalization.
! [diff-fix] Fix rename detection.
* [master] Release candidate #1
---
+ [diff-fix] Fix rename detection.
+ [diff-fix~1] Better common substring algorithm.
+ [commit-fix] Fix commit message normalization.
* [master] Release candidate #1
++* [diff-fix~2] Pretty-print messages.
Both fixes are tested well, and at this point, you want to merge in both of them. You
could merge in diff-fix first and then commit-fix next, like this:
$ git merge -m "Merge fix in diff-fix" diff-fix
$ git merge -m "Merge fix in commit-fix" commit-fix
Which would result in:
$ git show-branch
! [commit-fix] Fix commit message normalization.
! [diff-fix] Fix rename detection.
* [master] Merge fix in commit-fix
---
- [master] Merge fix in commit-fix
+ * [commit-fix] Fix commit message normalization.
- [master~1] Merge fix in diff-fix
+* [diff-fix] Fix rename detection.
+* [diff-fix~1] Better common substring algorithm.
* [master~2] Release candidate #1
++* [master~3] Pretty-print messages.
However, there is no particular reason to merge in one branch first and the other next,
when what you have are a set of truly independent changes (if the order mattered, then
they are not independent by definition). You could instead merge those two branches into
the current branch at once. First let’s undo what we just did and start over. We would
want to get the master branch before these two merges by resetting it to master~2:
$ git reset --hard master~2
You can make sure git show-branch matches the state before those two git merge you just
did. Then, instead of running two git merge commands in a row, you would merge these two
branch heads (this is known as making an Octopus):
$ git merge commit-fix diff-fix
$ git show-branch
! [commit-fix] Fix commit message normalization.
! [diff-fix] Fix rename detection.
* [master] Octopus merge of branches 'diff-fix' and 'commit-fix'
---
- [master] Octopus merge of branches 'diff-fix' and 'commit-fix'
+ * [commit-fix] Fix commit message normalization.
+* [diff-fix] Fix rename detection.
+* [diff-fix~1] Better common substring algorithm.
* [master~1] Release candidate #1
++* [master~2] Pretty-print messages.
Note that you should not do Octopus just because you can. An octopus is a valid thing to
do and often makes it easier to view the commit history if you are merging more than two
independent changes at the same time. However, if you have merge conflicts with any of the
branches you are merging in and need to hand resolve, that is an indication that the
development happened in those branches were not independent after all, and you should
merge two at a time, documenting how you resolved the conflicts, and the reason why you
preferred changes made in one side over the other. Otherwise it would make the project
history harder to follow, not easier.
SEE ALSO
gittutorial(7), gittutorial-2(7), gitcvs-migration(7), git-help(1), giteveryday(7), The
Git User’s Manual[1]
GIT
Part of the git(1) suite
NOTES
1. the Git User Manual
file:///usr/share/doc/git/html/user-manual.html
2. Randy Dunlap’s presentation
https://web.archive.org/web/20120915203609/http://www.xenotime.net/linux/mentor/linux-mentoring-2006.pdf