Provided by: gpm_1.20.7-10build1_amd64 bug

NAME

       gpm-types - pointer types (mice, tablets, etc.) managed by gpm.
       The information below is extracted from the texinfo file, which is the preferred source of
       information.

DESCRIPTION

       This manpage describes the various pointer types currently available in gpm. If  you  look
       at  the source code, you'll find that pointer-specific code is confined to `mice.c' (while
       it used to only include mouse decoders, gpm  now  supports  tablets  and  touchscreens  as
       well).

       The  mouse  type  is  specified  on command line with the `-t' option. The option takes an
       argument, which represents the name of a mouse  type.  Each  type  can  be  associated  to
       different  names.  For old mouse types, one name is the old selection-compatible name, and
       another is the XFree name. After version 1.18.1 of gpm, the number of  synonyms  was  made
       arbitrary and the actual name being used is made available to the function responsible for
       mouse initialization. Therefore it is possible for a  mouse  decoder  to  behave  slightly
       differently  according  to the name being used for the device (if this feature was already
       present, we wouldn't have for example ms+ and ms+lr as different mouse types).

       The initialization procedure of each mouse type can also receive extra option, by means of
       the -o command line option. Since interpretation of the option string is decoder-specific,
       the allowed options are described in association to each mouse type. When  no  description
       of  option strings is provided, that means the option string is unused for that mouse type
       and specifying one generates an error.  When  the  document  refer  to  ``standard  serial
       options''  it  means  that  one  of -o dtr, -o rts, -o both can be specified to toggle the
       control lines of the serial port.

       The following mouse type are corrently recognized:

       bare Microsoft
              The Microsoft protocol, without any extension. It only reports two buttons. If your
              device  has  three,  you  should either try running the mman decoder or msc. In the
              latter case, you need to tell the mouse to talk msc protocol by  toggling  the  DTR
              and  RTS  lines  (with  one  of -o drt, -o rts or -o both) or invoking `gpm -t msc'
              while keeping the middle button pressed. Very annoying, indeed.  This mouse decoder
              accepts standard serial options, although they should not be needed.

       ms     This  is the original Microsoft protocol, with a middle-button extension.  Some old
              two-button devices send some spurious packets which can be misunderstood as middle-
              button  events.  If  this  is  your case, use the `bare' mouse type.  Some new two-
              button devices are ``plug and play'', and they don't play fair at all; in this case
              try  -t pnp.  Many (most) three-button devices that use the microsoft protocol fail
              to report some middle-button events during mouse motion.  Since the  protocol  does
              not distinguish between the middle button going up and the middle button going down
              it would be liable to get out of step, so this decoder declares the  middle  button
              to  be  up whenever the mouse moves. This prevents dragging with the middle button,
              so you should probably use `-t ms+lr' instead of this decoder,  especially  if  you
              want  to  use X.  This mouse decoder accepts standard serial options, although they
              should not be needed.

       ms+    This is the same as `-t ms' except that the middle button is not reset during mouse
              motion. So you can drag with the middle button. However, if your mouse exhibits the
              usual buggy behaviour the decoder is likely  to  get  out  of  step  with  reality,
              thinking  the  middle  button  is  up  when  it's  down and vice versa.  You should
              probably use `-t ms+lr' instead  of  this  decoder.   This  mouse  decoder  accepts
              standard serial options, although they should not be needed.

       ms+lr  This  is  the same as `-t ms+' except that there is an additional facility to reset
              the state of the middle button by pressing the other two buttons together. Do  this
              when the decoder gets into a confused state where it thinks the middle button is up
              when it's down and vice versa. (If you get sick of having to do this, please  don't
              blame  gpm;  blame  your  buggy mouse! Note that most three-button mice that do the
              microsoft protocol can be made to do the MouseSystems  protocol  instead.  The  ``3
              Button  Serial  Mouse mini-HOWTO'' has information about this.)  This mouse decoder
              accepts standard serial options, although they should not be needed.

       msc MouseSystems
              This is the standard protocol  for  three-button  serial  devices.   Some  of  such
              devices  only  enter MouseSystem mode if the RTS, DTR or both lines are pushed low.
              Thus, you may try -t msc associated with -o rts, -o dtr or -o both.

       mman Mouseman
              The protocol used by the new Logitech devices with three buttons.  It  is  backward
              compatible  with  the  Microsoft  protocol,  so if your mouse has three buttons and
              works with -t ms or similar decoders you may try -t mman instead to use the  middle
              button.   This  mouse decoder accepts standard serial options, although they should
              not be needed.

       sun    The protocol used on Sparc computers and a few others.  This mouse decoder  accepts
              standard serial options, although they should not be needed.

       mm MMSeries
              Title  says  it  all.  This mouse decoder accepts standard serial options, although
              they should not be needed.

       logi Logitech
              This is the protocol used by old serial Logitech mice.

       bm BusMouse
              Some bus devices use this protocol, including those produced by Logitech.

       ps2 PS/2
              The protocol used by most busmice.

       ncr    This `type' is able to decode the pointing pen found on some laptops (the NCR  3125
              pen)

       wacom  The  protocol  used  by  the Wacom tablet. Since version 1.18.1 we have a new Wacom
              decoder, as the old one was not working with new tablets. This decoder  was  tested
              with  Ultrapad,  PenPartner,  and Graphire tablets.  Options: -o relative (default)
              for relative mode, -o absolute for absolute mode.

       genitizer
              The This mouse decoder accepts standard serial options, although they should not be
              needed.

       logim  Used to turn Logitech mice into Mouse-Systems-Compatible.  Obviously, it only works
              with some of the Logitech mice.

       pnp    This decoder works with the new mice produces by our friend Bill,  and  maybe  with
              the  old  ones  as well. The Pnp protocol is hardwired at 1200 baud and is upset by
              normal initialization, so this is a -t bare decoder with no initialization at  all.
              This  mouse  decoder  accepts  standard serial options, although they should not be
              needed.

       ms3    A decoder for the new serial IntelliMouse devices, the ones with three buttons  and
              a protocol incompatible with older ones. The wheel is currently unused.

       imps2  ``IntelliMouse''  on  the  ps/2  port.  This  type  can  also be used for a generic
              2-button ps/2 mouse too, since it will auto-detect the type.

       netmouse
              Decodes the ``Genius NetMouse'' type of devices  on  the  ps/2  port.   For  serial
              ``Netmouse'' devices, use the ``ms3'' decoder.

       cal    A decoder of the ``Calcomp UltraSlate device.

       calr   Same as above, but in relative mode.

       twid   Support  for  the  twiddler  keyboard.  As of gpm-1.14 this decoder includes a char
              generator for the text console, but doesn't yet support X keycodes.  If  used  with
              `-R', `gpm' will anyway repeat mouse events to the X server. More information about
              twiddler support can be found in `README.twiddler', in the gpm distribution.

       syn synaptics
              A decoder for the Synaptics TouchPad connected to  the  serial  port.   This  mouse
              decoder accepts standard serial options, although they should not be needed.

       synps2 synaptics_ps2
              Same as above, but for the devices attached to the ps2 port.

       brw    A  decoder  for  the  Fellowes  Browser, a device with 4 buttons and a wheel.  This
              mouse decoder accepts standard serial options, although they should not be needed.

       js Joystick
              This mouse type uses the joystick device to  generate  mouse  events.  It  is  only
              available  if  the  header  `linux/joystick.h' is found at compile time. The header
              (and the device as well) has been introduced only during 2.1  development,  and  is
              not present in version 2.0 of the kernel.

       summa  This  is  a  decode for the Symmagraphics of Genius tablet, run in absolute mode. A
              repeater is associated to this decoder, so it can -R summa can be used to  generate
              X  events  even  for other absolute-pointing devices, like touchscreens. To use the
              repeated data from X, you need a modified xf86Summa.o module.

       mtouch A  decoder  for  the  MicroTouch  touch  screen.   Please   refer   to   the   file
              `README.microtouch'  in the source tree of gpm for further information. In the near
              future, anyways, I plan to fold back to this  documentation  the  content  of  that
              file.

       gunze  A  decoder  for  the gunze touch screen. Please refer to the file `README.gunze' in
              the source tree of gpm for further information. In the near future, anyways, I plan
              to  fold  back  to this documentation the content of that file. The decoder accepts
              the following options: smooth=, debounce=. An higher smoothness results  in  slower
              motion  as  well;  a  smaller  smoothness  gives faster motion but, obviously, less
              smooth.  The default smoothness is 9. The debounce time is express in  milliseconds
              and  is  the  minimum  duration  of  an up-down event to be taken as a tap. Smaller
              bounces are ignored.

       acecad The Acecad tablet in absolute mode.

       wp wizardpad
              Genius WizardPad tablet

FILES

       src/mice.c           The source file for pointer decoders

SEE ALSO

        gpm(8)      The General Purpose Mouse server

       The info file about `gpm', which gives more complete information and explains how to write
       a gpm client.