Provided by: pacemaker_2.1.4-2ubuntu1_amd64 bug

NAME

       pacemaker-schedulerd - Pacemaker scheduler options

SYNOPSIS

       [no-quorum-policy=select] [symmetric-cluster=boolean] [maintenance-mode=boolean]
       [start-failure-is-fatal=boolean] [enable-startup-probes=boolean] [shutdown-lock=boolean]
       [shutdown-lock-limit=time] [stonith-enabled=boolean] [stonith-action=select]
       [stonith-timeout=time] [have-watchdog=boolean] [concurrent-fencing=boolean]
       [startup-fencing=boolean] [priority-fencing-delay=time] [cluster-delay=time]
       [batch-limit=integer] [migration-limit=integer] [stop-all-resources=boolean]
       [stop-orphan-resources=boolean] [stop-orphan-actions=boolean] [remove-after-stop=boolean]
       [pe-error-series-max=integer] [pe-warn-series-max=integer] [pe-input-series-max=integer]
       [node-health-strategy=select] [node-health-base=integer] [node-health-green=integer]
       [node-health-yellow=integer] [node-health-red=integer] [placement-strategy=select]

DESCRIPTION

       Cluster options used by Pacemaker's scheduler

SUPPORTED PARAMETERS

       no-quorum-policy = select [stop]
           What to do when the cluster does not have quorum

           What to do when the cluster does not have quorum Allowed values: stop, freeze, ignore,
           demote, suicide

       symmetric-cluster = boolean [true]
           Whether resources can run on any node by default

       maintenance-mode = boolean [false]
           Whether the cluster should refrain from monitoring, starting, and stopping resources

       start-failure-is-fatal = boolean [true]
           Whether a start failure should prevent a resource from being recovered on the same
           node

           When true, the cluster will immediately ban a resource from a node if it fails to
           start there. When false, the cluster will instead check the resource's fail count
           against its migration-threshold.

       enable-startup-probes = boolean [true]
           Whether the cluster should check for active resources during start-up

       shutdown-lock = boolean [false]
           Whether to lock resources to a cleanly shut down node

           When true, resources active on a node when it is cleanly shut down are kept "locked"
           to that node (not allowed to run elsewhere) until they start again on that node after
           it rejoins (or for at most shutdown-lock-limit, if set). Stonith resources and
           Pacemaker Remote connections are never locked. Clone and bundle instances and the
           promoted role of promotable clones are currently never locked, though support could be
           added in a future release.

       shutdown-lock-limit = time [0]
           Do not lock resources to a cleanly shut down node longer than this

           If shutdown-lock is true and this is set to a nonzero time duration, shutdown locks
           will expire after this much time has passed since the shutdown was initiated, even if
           the node has not rejoined.

       stonith-enabled = boolean [true]
           *** Advanced Use Only *** Whether nodes may be fenced as part of recovery

           If false, unresponsive nodes are immediately assumed to be harmless, and resources
           that were active on them may be recovered elsewhere. This can result in a
           "split-brain" situation, potentially leading to data loss and/or service
           unavailability.

       stonith-action = select [reboot]
           Action to send to fence device when a node needs to be fenced ("poweroff" is a
           deprecated alias for "off")

           Action to send to fence device when a node needs to be fenced ("poweroff" is a
           deprecated alias for "off") Allowed values: reboot, off, poweroff

       stonith-timeout = time [60s]
           *** Advanced Use Only *** Unused by Pacemaker

           This value is not used by Pacemaker, but is kept for backward compatibility, and
           certain legacy fence agents might use it.

       have-watchdog = boolean [false]
           Whether watchdog integration is enabled

           This is set automatically by the cluster according to whether SBD is detected to be in
           use. User-configured values are ignored. The value `true` is meaningful if diskless
           SBD is used and `stonith-watchdog-timeout` is nonzero. In that case, if fencing is
           required, watchdog-based self-fencing will be performed via SBD without requiring a
           fencing resource explicitly configured.

       concurrent-fencing = boolean [false]
           Allow performing fencing operations in parallel

       startup-fencing = boolean [true]
           *** Advanced Use Only *** Whether to fence unseen nodes at start-up

           Setting this to false may lead to a "split-brain" situation,potentially leading to
           data loss and/or service unavailability.

       priority-fencing-delay = time [0]
           Apply fencing delay targeting the lost nodes with the highest total resource priority

           Apply specified delay for the fencings that are targeting the lost nodes with the
           highest total resource priority in case we don't have the majority of the nodes in our
           cluster partition, so that the more significant nodes potentially win any fencing
           match, which is especially meaningful under split-brain of 2-node cluster. A promoted
           resource instance takes the base priority + 1 on calculation if the base priority is
           not 0. Any static/random delays that are introduced by `pcmk_delay_base/max`
           configured for the corresponding fencing resources will be added to this delay. This
           delay should be significantly greater than, safely twice, the maximum
           `pcmk_delay_base/max`. By default, priority fencing delay is disabled.

       cluster-delay = time [60s]
           Maximum time for node-to-node communication

           The node elected Designated Controller (DC) will consider an action failed if it does
           not get a response from the node executing the action within this time (after
           considering the action's own timeout). The "correct" value will depend on the speed
           and load of your network and cluster nodes.

       batch-limit = integer [0]
           Maximum number of jobs that the cluster may execute in parallel across all nodes

           The "correct" value will depend on the speed and load of your network and cluster
           nodes. If set to 0, the cluster will impose a dynamically calculated limit when any
           node has a high load.

       migration-limit = integer [-1]
           The number of live migration actions that the cluster is allowed to execute in
           parallel on a node (-1 means no limit)

       stop-all-resources = boolean [false]
           Whether the cluster should stop all active resources

       stop-orphan-resources = boolean [true]
           Whether to stop resources that were removed from the configuration

       stop-orphan-actions = boolean [true]
           Whether to cancel recurring actions removed from the configuration

       remove-after-stop = boolean [false]
           *** Deprecated *** Whether to remove stopped resources from the executor

           Values other than default are poorly tested and potentially dangerous. This option
           will be removed in a future release.

       pe-error-series-max = integer [-1]
           The number of scheduler inputs resulting in errors to save

           Zero to disable, -1 to store unlimited.

       pe-warn-series-max = integer [5000]
           The number of scheduler inputs resulting in warnings to save

           Zero to disable, -1 to store unlimited.

       pe-input-series-max = integer [4000]
           The number of scheduler inputs without errors or warnings to save

           Zero to disable, -1 to store unlimited.

       node-health-strategy = select [none]
           How cluster should react to node health attributes

           Requires external entities to create node attributes (named with the prefix "#health")
           with values "red", "yellow", or "green". Allowed values: none, migrate-on-red,
           only-green, progressive, custom

       node-health-base = integer [0]
           Base health score assigned to a node

           Only used when node-health-strategy is set to progressive.

       node-health-green = integer [0]
           The score to use for a node health attribute whose value is "green"

           Only used when node-health-strategy is set to custom or progressive.

       node-health-yellow = integer [0]
           The score to use for a node health attribute whose value is "yellow"

           Only used when node-health-strategy is set to custom or progressive.

       node-health-red = integer [-INFINITY]
           The score to use for a node health attribute whose value is "red"

           Only used when node-health-strategy is set to custom or progressive.

       placement-strategy = select [default]
           How the cluster should allocate resources to nodes

           How the cluster should allocate resources to nodes Allowed values: default,
           utilization, minimal, balanced

AUTHOR

       Andrew Beekhof <andrew@beekhof.net>
           Author.