NAME

       fence_crosslink - Fence agent for cross-link two-node clusters

DESCRIPTION

       This  agent  helps  two-node  clusters  to tackle the situation where one node lost power,
       cannot be fenced by telling pacemaker that if the node is not reachable over the crosslink
       cable, we can assume it is dead

       fence_crosslink  accepts  options  on the command line as well as from stdin. Fenced sends
       parameters through stdin when it execs the agent. fence_crosslink can  be  run  by  itself
       with  command  line options.  This is useful for testing and for turning outlets on or off
       from scripts.

       Vendor URL:

PARAMETERS

       -o, --action=[action]
              Fencing action (Default Value: reboot)

       -a, --crosscableip=[IP]
              Cross-cable IP This parameter is always required.

       -n, --plug=[id]
              Physical plug number on device, UUID or identification of machine This parameter is
              always required.

       -T, --timeout=[seconds]
              No ICMP reply in 5 seconds -> Node is considered dead (Default Value: 5)

       -q, --quiet
              Disable  logging to stderr. Does not affect --verbose or --debug-file or logging to
              syslog.

       -v, --verbose
              Verbose mode. Multiple -v flags can be stacked on the command line (e.g., -vvv)  to
              increase verbosity.

       --verbose-level
              Level  of  debugging  detail  in  output. Defaults to the number of --verbose flags
              specified on  the  command  line,  or  to  1  if  verbose=1  in  a  stonith  device
              configuration (i.e., on stdin).

       -D, --debug-file=[debugfile]
              Write debug information to given file

       -V, --version
              Display version information and exit

       -h, --help
              Display help and exit

       -C, --separator=[char]
              Separator for CSV created by 'list' operation (Default Value: ,)

       --delay=[seconds]
              Wait X seconds before fencing is started (Default Value: 0)

       --disable-timeout=[true/false]
              Disable timeout (true/false) (default: true when run from Pacemaker 2.0+)

       --login-timeout=[seconds]
              Wait X seconds for cmd prompt after login (Default Value: 5)

       --power-timeout=[seconds]
              Test X seconds for status change after ON/OFF (Default Value: 20)

       --power-wait=[seconds]
              Wait X seconds after issuing ON/OFF (Default Value: 0)

       --shell-timeout=[seconds]
              Wait X seconds for cmd prompt after issuing command (Default Value: 3)

       --stonith-status-sleep=[seconds]
              Sleep  X  seconds  between  status calls during a STONITH action (Default Value: 1)

       --retry-on=[attempts]
              Count of attempts to retry power on (Default Value: 1)

ACTIONS

       on     Power on machine.

       off    Power off machine.

       reboot Reboot machine.

       status This returns the status of the plug/virtual machine.

       list   List available plugs with aliases/virtual machines if there  is  support  for  more
              then one device. Returns N/A otherwise.

       list-status
              List  available plugs with aliases/virtual machines and their power state if it can
              be obtained without additional commands.

       monitor
              Check the health of fence device

       metadata
              Display the XML metadata describing this resource.

       manpage
               The operational behavior of this is not known.

       validate-all
              Validate if all required parameters are entered.

STDIN PARAMETERS

       action Fencing action (Default Value: reboot)

       crosscableip
              Cross-cable IP This parameter is always required.

       plug   Physical plug number on device, UUID or identification of machine This parameter is
              always required. Obsoletes: port

       timeout
              No ICMP reply in 5 seconds -> Node is considered dead (Default Value: 5)

       quiet  Disable  logging to stderr. Does not affect --verbose or --debug-file or logging to
              syslog.

       verbose
              Verbose mode. Multiple -v flags can be stacked on the command line (e.g., -vvv)  to
              increase verbosity.

       verbose_level
              Level  of  debugging  detail  in  output. Defaults to the number of --verbose flags
              specified on  the  command  line,  or  to  1  if  verbose=1  in  a  stonith  device
              configuration (i.e., on stdin).

       debug_file
              Write debug information to given file Obsoletes: debug

       version
              Display version information and exit

       help   Display help and exit

       separator
              Separator for CSV created by 'list' operation (Default Value: ,)

       delay  Wait X seconds before fencing is started (Default Value: 0)

       disable_timeout
              Disable timeout (true/false) (default: true when run from Pacemaker 2.0+)

       login_timeout
              Wait X seconds for cmd prompt after login (Default Value: 5)

       power_timeout
              Test X seconds for status change after ON/OFF (Default Value: 20)

       power_wait
              Wait X seconds after issuing ON/OFF (Default Value: 0)

       shell_timeout
              Wait X seconds for cmd prompt after issuing command (Default Value: 3)

       stonith_status_sleep
              Sleep  X  seconds  between  status calls during a STONITH action (Default Value: 1)

       retry_on
              Count of attempts to retry power on (Default Value: 1)