Provided by: fence-agents-base_4.11.0-1ubuntu2_all 
NAME
fence_mpath - Fence agent for multipath persistent reservation
DESCRIPTION
fence_mpath is an I/O fencing agent that uses SCSI-3 persistent reservations to control
access multipath devices. Underlying devices must support SCSI-3 persistent reservations
(SPC-3 or greater) as well as the "preempt-and-abort" subcommand. The fence_mpath agent
works by having a unique key for each node that has to be set in /etc/multipath.conf. Once
registered, a single node will become the reservation holder by creating a "write
exclusive, registrants only" reservation on the device(s). The result is that only
registered nodes may write to the device(s). When a node failure occurs, the fence_mpath
agent will remove the key belonging to the failed node from the device(s). The failed node
will no longer be able to write to the device(s). A manual reboot is required.
When used as a watchdog device you can define e.g. retry=1, retry-sleep=2 and verbose=yes
parameters in /etc/sysconfig/stonith if you have issues with it failing.
fence_mpath accepts options on the command line as well as from stdin. Fenced sends
parameters through stdin when it execs the agent. fence_mpath can be run by itself with
command line options. This is useful for testing and for turning outlets on or off from
scripts.
Vendor URL: https://www.sourceware.org/dm/
PARAMETERS
-o, --action=[action]
Fencing action (Default Value: off)
-d, --devices=[devices]
List of devices to use for current operation. Devices can be comma-separated list
of device-mapper multipath devices (eg.
/dev/mapper/3600508b400105df70000e00000ac0000 or /dev/mapper/mpath1). Each device
must support SCSI-3 persistent reservations.
-k, --key=[key]
Replaced by port/-n/--plug
-n, --plug=[key]
Key to use for the current operation. This key should be unique to a node and have
to be written in /etc/multipath.conf. For the "on" action, the key specifies the
key use to register the local node. For the "off" action, this key specifies the
key to be removed from the device(s).
-q, --quiet
Disable logging to stderr. Does not affect --verbose or --debug-file or logging to
syslog.
-v, --verbose
Verbose mode. Multiple -v flags can be stacked on the command line (e.g., -vvv) to
increase verbosity.
--verbose-level
Level of debugging detail in output. Defaults to the number of --verbose flags
specified on the command line, or to 1 if verbose=1 in a stonith device
configuration (i.e., on stdin).
-D, --debug-file=[debugfile]
Write debug information to given file
-V, --version
Display version information and exit
-h, --help
Display help and exit
--delay=[seconds]
Wait X seconds before fencing is started (Default Value: 0)
--disable-timeout=[true/false]
Disable timeout (true/false) (default: true when run from Pacemaker 2.0+)
--login-timeout=[seconds]
Wait X seconds for cmd prompt after login (Default Value: 5)
--mpathpersist-path=[path]
Path to mpathpersist binary (Default Value: /usr/sbin/mpathpersist)
--power-timeout=[seconds]
Test X seconds for status change after ON/OFF (Default Value: 20)
--power-wait=[seconds]
Wait X seconds after issuing ON/OFF (Default Value: 0)
--shell-timeout=[seconds]
Wait X seconds for cmd prompt after issuing command (Default Value: 3)
--stonith-status-sleep=[seconds]
Sleep X seconds between status calls during a STONITH action (Default Value: 1)
--store-path=[path]
Path to directory where fence agent can store information (Default Value:
/var/run/cluster)
--retry-on=[attempts]
Count of attempts to retry power on (Default Value: 1)
--use-sudo
Use sudo (without password) when calling 3rd party software
--sudo-path=[path]
Path to sudo binary (Default Value: /usr/bin/sudo)
ACTIONS
on Power on machine.
off Power off machine.
status This returns the status of the plug/virtual machine.
monitor
Check the health of fence device
metadata
Display the XML metadata describing this resource.
manpage
The operational behavior of this is not known.
validate-all
Validate if all required parameters are entered.
STDIN PARAMETERS
action Fencing action (Default Value: off)
devices
List of devices to use for current operation. Devices can be comma-separated list
of device-mapper multipath devices (eg.
/dev/mapper/3600508b400105df70000e00000ac0000 or /dev/mapper/mpath1). Each device
must support SCSI-3 persistent reservations.
key Replaced by port/-n/--plug
plug Key to use for the current operation. This key should be unique to a node and have
to be written in /etc/multipath.conf. For the "on" action, the key specifies the
key use to register the local node. For the "off" action, this key specifies the
key to be removed from the device(s). Obsoletes: port
quiet Disable logging to stderr. Does not affect --verbose or --debug-file or logging to
syslog.
verbose
Verbose mode. Multiple -v flags can be stacked on the command line (e.g., -vvv) to
increase verbosity.
verbose_level
Level of debugging detail in output. Defaults to the number of --verbose flags
specified on the command line, or to 1 if verbose=1 in a stonith device
configuration (i.e., on stdin).
debug_file
Write debug information to given file Obsoletes: debug
version
Display version information and exit
help Display help and exit
delay Wait X seconds before fencing is started (Default Value: 0)
disable_timeout
Disable timeout (true/false) (default: true when run from Pacemaker 2.0+)
login_timeout
Wait X seconds for cmd prompt after login (Default Value: 5)
mpathpersist_path
Path to mpathpersist binary (Default Value: /usr/sbin/mpathpersist)
power_timeout
Test X seconds for status change after ON/OFF (Default Value: 20)
power_wait
Wait X seconds after issuing ON/OFF (Default Value: 0)
shell_timeout
Wait X seconds for cmd prompt after issuing command (Default Value: 3)
stonith_status_sleep
Sleep X seconds between status calls during a STONITH action (Default Value: 1)
store_path
Path to directory where fence agent can store information (Default Value:
/var/run/cluster)
retry_on
Count of attempts to retry power on (Default Value: 1)
use_sudo
Use sudo (without password) when calling 3rd party software Obsoletes: sudo
sudo_path
Path to sudo binary (Default Value: /usr/bin/sudo)