NAME

       fence_virt - Fence agent for virtual machines

DESCRIPTION

       fence_virt is an I/O Fencing agent which can be used with virtual machines.

       fence_virt  accepts  options  on  the  command  line  as  well as from stdin. Fenced sends
       parameters through stdin when it execs the agent. fence_virt can be  run  by  itself  with
       command  line  options.  This is useful for testing and for turning outlets on or off from
       scripts.

       Vendor URL: https://libvirt.org

PARAMETERS

       -d     Specify (stdin) or increment (command line) debug level

       -D     Serial device (default=/dev/ttyS1) (Default Value: /dev/ttyS1)

       -P     Serial Parameters (default=115200,8N1) (Default Value: 115200,8N1)

       -A     VM Channel IP address (default=10.0.2.179) (Default Value: 10.0.2.179)

       -p     TCP, Multicast, VMChannel, or VM socket port (default=1229) (Default  Value:  1229)

       -n     Virtual  Machine  (domain  name) to fence This parameter is always required.

       -o     Fencing action (null,  off,  on,  [reboot],  status,  list,  list-status,  monitor,
              validate-all, metadata) (Default Value: reboot)

       -t     Fencing timeout (in seconds; default=30) (Default Value: 30)

       -T     IP  address  to  connect  to  in TCP mode (default=127.0.0.1 / ::1) (Default Value:
              127.0.0.1)

       -S     vm socket CID to connect to in vsock mode (Default Value: 2)

       -C     Authentication (none, sha1, [sha256], sha512) (Default Value: sha256)

       -c     Packet hash strength (none, sha1, [sha256], sha512) (Default Value: sha256)

       -k     Shared    key    file    (default=/etc/cluster/fence_xvm.key)    (Default    Value:
              /etc/cluster/fence_xvm.key)

       -w     Fencing delay (in seconds; default=0) (Default Value: 0)

ACTIONS

       null
               The operational behavior of this is not known.

       on     Power on machine.

       off    Power off machine.

       reboot Reboot machine.

       metadata
              Display the XML metadata describing this resource.

       status This returns the status of the plug/virtual machine.

       monitor
              Check the health of fence device

       list   List  available  plugs  with  aliases/virtual machines if there is support for more
              then one device. Returns N/A otherwise.

       list-status
              List available plugs with aliases/virtual machines and their power state if it  can
              be obtained without additional commands.

       validate-all
              Validate if all required parameters are entered.

STDIN PARAMETERS

       debug  Specify (stdin) or increment (command line) debug level

       serial_device
              Serial device (default=/dev/ttyS1) (Default Value: /dev/ttyS1)

       serial_params
              Serial Parameters (default=115200,8N1) (Default Value: 115200,8N1)

       channel_address
              VM Channel IP address (default=10.0.2.179) (Default Value: 10.0.2.179)

       ipport TCP,  Multicast,  VMChannel, or VM socket port (default=1229) (Default Value: 1229)

       plug   Virtual  Machine  (domain  name)  to  fence  This  parameter  is  always  required.
              Obsoletes: port

       action Fencing  action  (null,  off,  on,  [reboot],  status,  list, list-status, monitor,
              validate-all, metadata) (Default Value: reboot)

       timeout
              Fencing timeout (in seconds; default=30) (Default Value: 30)

       ipaddr IP address to connect to in TCP mode  (default=127.0.0.1  /  ::1)  (Default  Value:
              127.0.0.1)

       vsock  vm socket CID to connect to in vsock mode (Default Value: 2)

       auth   Authentication (none, sha1, [sha256], sha512) (Default Value: sha256)

       hash   Packet hash strength (none, sha1, [sha256], sha512) (Default Value: sha256)

       key_file
              Shared    key    file    (default=/etc/cluster/fence_xvm.key)    (Default    Value:
              /etc/cluster/fence_xvm.key)

       delay  Fencing delay (in seconds; default=0) (Default Value: 0)