Provided by: perf-tools-unstable_1.0.1~20200130+git49b8cdf-1ubuntu1_all bug

NAME

       funcgraph  -  trace  kernel  function  graph, showing child function calls and times. Uses
       Linux ftrace.

SYNOPSIS

       funcgraph [-aCDhHPtT] [-m maxdepth] [-p PID] [-L TID] [-d secs] funcstring

DESCRIPTION

       This is an exploratory tool that shows the graph of  child  function  calls  for  a  given
       kernel  function.  This  can cost moderate overhead to execute, and should only be used to
       understand kernel behavior before using other, lower overhead tools. This is  a  proof  of
       concept using Linux ftrace capabilities on older kernels.

       The  output format is the same as the ftrace function graph trace format, described in the
       kernel source under Documentation/trace/ftrace.txt.  Note that the output may be  shuffled
       when  different  CPU  buffers  are  read;  check  the  CPU  column for changes, or include
       timestamps (-t) and post sort.

       The "-d duration" mode leaves the trace data in the kernel buffer, and only  reads  it  at
       the   end.   If   the   trace   data   is   large,   beware  of  exhausting  buffer  space
       (/sys/kernel/debug/tracing/buffer_size_kb) and losing data.

       Also beware of feedback loops: tracing tcp* functions over  an  ssh  session,  or  writing
       ext4* functions to an ext4 file system. For the former, tcp trace data could be redirected
       to a file (as in the usage message). For the latter, trace to the screen  or  a  different
       file system.

       WARNING:  This  uses dynamic tracing of kernel functions, and could cause kernel panics or
       freezes. Test, and know what you are doing, before use.  Also see the OVERHEAD section.

       Since this uses ftrace, only the root user can use this tool.

REQUIREMENTS

       FTRACE CONFIG, which you may already have enabled and available on recent kernels.

OPTIONS

       -a     All info. Same as -HPt. (But no -T, which isn't available in older kernels.)

       -C     Function durations measure on-CPU time only (exclude sleep time).

       -d seconds
              Set the duration of tracing, in seconds. Trace output will be buffered and  printed
              at the end. This also reduces overheads by buffering in-kernel, instead of printing
              events as they occur.

              The     ftrace     buffer     has     a      fixed      size      per-CPU      (see
              /sys/kernel/debug/tracing/buffer_size_kb).  If  you  think  events are missing, try
              increasing that size.

       -D     Do not show function duration times.

       -h     Print usage message.

       -H     Print column headers.

       -m     Max depth to trace functions. By default,  unlimited  (0).  This  feature  is  only
              available for newer Linux kernel versions.

       -p PID Only trace kernel functions when this process ID is on-CPU.

       -L TID Only trace kernel functions when this thread ID is on-CPU.

       -P     Show process names and process IDs with every line of output.

       -t     Show timestamps on every line of output.

       -T     Tail  mode:  decorate  function  return  lines  with the name of the function. This
              option may not be available for older kernels.

       funcstring
              A function name to trace, which may include file glob style wildcards ("*") at  the
              beginning  or  ending  of  a  string only. Eg, "vfs*" means match "vfs" followed by
              anything. Since the output is verbose, you  probably  only  want  to  trace  single
              functions, and not use wildcards.

EXAMPLES

       Trace calls to do_nanosleep(), showing child functions and durations:
              # funcgraph do_nanosleep

       Same as above, but include column headers:
              # funcgraph -H do_nanosleep

       Same as above, but include timestamps and process names as well:
              # funcgraph -HtP do_nanosleep

       Trace all vfs_read() kernel function calls, and child functions, for PID 198 only:
              # funcgraph -p 198 vfs_read

       Trace  all  vfs_read() kernel function calls, and child functions, for 1 second then write
       to a file.
              # funcgraph -d 1 vfs_read > out

FIELDS

       The output format depends on the kernel version, and headings can be printed using -H. The
       format  is  the  same  as the ftrace function trace format, described in the kernel source
       under Documentation/trace/ftrace.txt.

       Typical fields are:

       TIME   (Shown with -t.) Time of event, in seconds.

       CPU    The CPU this event occurred on.

       TASK/PID
              (Shown with -P.) The process name (which could include dashes),  a  dash,  and  the
              process ID.

       DURATION
              Elapsed  time  during  the  function  call,  inclusive  of  children.  This is also
              inclusive of sleep time, unless -C is used. The time is  either  displayed  on  the
              return of a function ("}"), or for a leaf function (no children), on the same line.

              If the trace output begins with some returns that lack entries, their durations may
              not be trusted. This is usually only the case for the first dozen or so lines.

       FUNCTION CALLS
              Entries and returns from kernel functions.

OVERHEAD

       This tool causes moderate to high overheads. Use with caution  for  exploratory  purposes,
       then  switch to lower overhead techniques based on findings. It's expected that the kernel
       will run at least 50% slower while this tool is running -- even while no output  is  being
       generated.  This  is  because  ALL  kernel functions are traced, and filtered based on the
       function of interest. When output  is  generated,  it  can  generate  many  lines  quickly
       depending  on  the  traced  event.  Such data will cause performance overheads.  This also
       works without buffering  by  default,  printing  function  events  as  they  happen  (uses
       trace_pipe),  context switching and consuming CPU to do so. If needed, you can try the "-d
       secs" option, which buffers events instead, reducing overhead. If  you  think  the  buffer
       option is losing events, try increasing the buffer size (buffer_size_kb).

       It's  a  good  idea to use funccount(8) first, which is lower overhead, to help you select
       which functions you may want to trace using funcgraph(8).

SOURCE

       This is from the perf-tools collection:

              https://github.com/brendangregg/perf-tools

       Also look under the examples directory for a text file containing example  usage,  output,
       and commentary for this tool.

OS

       Linux

STABILITY

       Unstable - in development.

AUTHOR

       Brendan Gregg

SEE ALSO

       funccount(8), functrace(8), kprobe(8)