Provided by: infiniband-diags_42.0-1_amd64 bug


       IBADDR - query InfiniBand address(es)


       ibaddr [options]


       Display  the lid (and range) as well as the GID address of the port specified (by DR path,
       lid, or GUID) or the local port by default.

       Note: this utility can be used as simple address resolver.


       --gid_show, -g show gid address only

       --lid_show, -l show lid range only

       --Lid_show, -L show lid range (in decimal) only

   Addressing Flags
       -D, --Direct     The address specified is a directed route

             [options] -D [options] "0"          # self port
             [options] -D [options] "0,1,2,1,4"  # out via port 1, then 2, ...

             (Note the second number in the path specified must match the port being
             used.  This can be specified using the port selection flag '-P' or the
             port found through the automatic selection process.)

       -G, --Guid     The address specified is a Port GUID

       -s, --sm_port <smlid>     use 'smlid' as the target lid for SA queries.

   Debugging flags
       -d     raise the IB debugging level.  May be used several times (-ddd or -d -d -d).

       -e     show send and receive errors (timeouts and others)

       -h, --help      show the usage message

       -v, --verbose
              increase the application verbosity level.  May be used several times (-vv or -v  -v

       -V, --version     show the version info.

   Port Selection flags
       -C, --Ca <ca_name>    use the specified ca_name.

       -P, --Port <ca_port>    use the specified ca_port.

   Local port Selection
       Multiple  port/Multiple CA support: when no IB device or port is specified (see the "local
       umad parameters" below), the libibumad library selects the port to use  by  the  following

          1. the first port that is ACTIVE.

          2. if not found, the first port that is UP (physical link up).

          If  a  port  and/or CA name is specified, the libibumad library attempts to fulfill the
          user request, and will fail if it is not possible.

          For example:

              ibaddr                 # use the first port (criteria #1 above)
              ibaddr -C mthca1       # pick the best port from "mthca1" only.
              ibaddr -P 2            # use the second (active/up) port from the first available IB device.
              ibaddr -C mthca0 -P 2  # use the specified port only.

   Configuration flags
       -y, --m_key <key>
              use the specified M_key for requests. If non-numeric value (like 'x') is  specified
              then a value will be prompted for.

       -t, --timeout <timeout_ms> override the default timeout for the solicited mads.

       --config, -z  <config_file> Specify alternate config file.
          Default: /etc/infiniband-diags/ibdiag.conf



       A  global  config  file  is provided to set some of the common options for all tools.  See
       supplied config file for details.


          ibaddr                  # local port\'s address
          ibaddr 32               # show lid range and gid of lid 32
          ibaddr -G 0x8f1040023   # same but using guid address
          ibaddr -l 32            # show lid range only
          ibaddr -L 32            # show decimal lid range only
          ibaddr -g 32            # show gid address only


       ibroute (8), ibtracert (8)


       Hal Rosenstock
              < >

                                            2013-10-11                                  IBADDR(8)