Provided by: opa-fastfabric_10.10.3.0.11-1ubuntu1_amd64 bug

NAME

       opaextractsellinks

       Produces  a CSV file listing all or some of the links in the fabric. opaextractsellinks is
       a front end to the opareport tool. The output from  this  tool  can  be  imported  into  a
       spreadsheet or parsed by other scripts.

Syntax

       opaextractsellinks [opareport  options]

Options

       --help

                 Produces full help text.

       opareport options

                 The following options are passed to opareport. This subset is considered typical
                 and useful for this command. By design,  the  tool  ignores  -o/--output  report
                 option.

                 -h/--hfi hfi
                           Specifies  the  HFI, numbered 1..n. Using 0 specifies that the -p port
                           port is a system-wide port number. Default is 0.

                 -p/--port port
                           Specifies the port, numbered 1..n. Using 0 specifies the first  active
                           port. Default is 0.

                 -X/--infile snapshot_input
                           Generates  a  report  using  the  data  in  the  snapshot_input  file.
                           snapshot_input must have been generated during a previous -o  snapshot
                           run. When used, the -s, -i, -C, and -a options are ignored. '-' may be
                           used as the snapshot_input to specify stdin.

                 -T/--topology topology_input
                           Uses topology_input file to augment  and  verify  fabric  information.
                           When  used,  various  reports  can  be  augmented with information not
                           available electronically (such as cable labels). '-' may  be  used  to
                           specify stdin.

                 -F/--focus point
                           Specifies the focus area for report. Used for all reports except route
                           to limit scope of report. Refer to Point Syntax for details.

-h and -p options permit a variety of selections:

       -h 0

                 First active port in system (Default).

       -h 0 -p 0

                 First active port in system.

       -h x

                 First active port on HFI x.

       -h x -p 0

                 First active port on HFI x.

       -h 0 -p y

                 Port y within system (no matter which ports are active).

       -h x -p y

                 HFI x, port y.

Point Syntax

       gid:value

                 value is numeric port GID of form: subnet:guid.

       lid:value

                 value is numeric LID.

       lid:value:node

                 value is numeric LID, selects entire node with given LID.

       lid:value:port:value2

                 value is numeric LID of node, value2 is port number.

       portguid:value

                 value is numeric port GUID.

       nodeguid:value

                 value is numeric node GUID.

       nodeguid:value1:port:value2

                 value1 is numeric node GUID, value2 is port number.

       iocguid:value

                 value is numeric IOC GUID.

       iocguid:value1:port:value2

                 value1 is numeric IOC GUID, value2 is port number.

       systemguid:value

                 value is numeric system image GUID.

       systemguid:value1:port:value2

                 value1 is the numeric system image GUID, value2 is port number.

       ioc:value

                 value is IOC Profile ID String (IOC Name).

       ioc:value1:port:value2

                 value1 is IOC Profile ID String (IOC Name), value2 is port number.

       iocpat:value

                 value is glob pattern for IOC Profile ID String (IOC Name).

       iocpat:value1:port:value2

                 value1 is glob pattern for IOC Profile ID String  (IOC  Name),  value2  is  port
                 number.

       ioctype:value

                 value is IOC type (SRP or OTHER).

       ioctype:value1:port:value2

                 value1 is IOC type (SRP or OTHER); value2 is port number.

       node:value

                 value is node description (node name).

       node:value1:port:value2

                 value1 is node description (node name), value2 is port number.

       nodepat:value

                 value is glob pattern for node description (node name).

       nodepat:value1:port:value2

                 value1  is the glob pattern for the node description (node name), value2 is port
                 number.

       nodedetpat:value

                 value is glob pattern for node details.

       nodedetpat:value1:port:value2

                 value1 is the glob pattern for the node details, value2 is port number.

       nodetype:value

                 value is node type (SW or FI).

       nodetype:value1:port:value2

                 value1 is node type (SW or FI), value2 is port number.

       rate:value

                 value is string for rate (25g, 50g, 75g, 100g), omits switch mgmt port 0.

       portstate:value

                 value is a string for state (down, init, armed, active, notactive, initarmed).

       portphysstate:value

                 value is a string for PHYs state (polling, disabled, training, linkup, recovery,
                 offline, test)

       mtucap:value

                 value is MTU size (2048, 4096, 8192, 10240), omits switch mgmt port 0.

       labelpat:value

                 value is glob pattern for cable label.

       lengthpat:value

                 value is glob pattern for cable length.

       cabledetpat:value

                 value is glob pattern for cable details.

       cabinflenpat:value

                 value is glob pattern for cable info length.

       cabinfvendnamepat:value

                 value is glob pattern for cable info vendor name.

       cabinfvendpnpat:value

                 value is glob pattern for cable info vendor part number.

       cabinfvendrevpat:value

                 value is glob pattern for cable info vendor revision.

       cabinfvendsnpat:value

                 value is glob pattern for cable info vendor serial number.

       cabinftype:value

                 value is either optical, passive_copper, active_copper, or unknown.

       linkdetpat:value

                 value is glob pattern for link details.

       portdetpat:value

                 value is glob pattern for port details.

       sm

                 Specifies the master subnet manager (SM).

       smdetpat:value

                 value is glob pattern for SM details.

       route:point1:point2

                 Specifies all ports along the routes between the two given points.

       led:value

                 value is either on or off for LED port beacon.

       linkqual:value

                 Specifies the ports with a link quality equal to value.

       linkqualLE:value

                 Specifies the ports with a link quality less than or equal to value.

       linkqualGE:value

                 Specifies the ports with a link quality greater than or equal to value.

       nodepatfile:FILENAME

                 Specifies the name of file with the list of nodepats or node descriptions.

       nodepairpatfile:FILENAME

                 Specifies the name of file with the list of node pairs, separated by a colon.

       ldr

                 Specifies  the  ports  with  a  non-zero  link down reason or neighbor link down
                 reason.

       ldr:value

                 Specifies the ports with a link down reason or neighbor link down  reason  equal
                 to value.

Examples

       # List all the links in the fabric:

       opaextractsellinks

       # List all the links to a switch named "coresw1":

       opaextractsellinks -F "node:coresw1"

       # List all the connections to end-nodes:

       opaextractsellinks -F "nodetype:FI"

       # List all the links on the 2nd HFI's fabric of a multi-plane fabric:

       opaextractsellinks -h 2