Ubuntu Manpage: realm - Manage enrollment in realms

NAME

       realm - Manage enrollment in realms

SYNOPSIS

       realm discover [realm-name]

       realm join [-U user] [realm-name]

       realm leave [-U user] [realm-name]

       realm list

       realm permit [-ax] [-R realm] {user@domain...}

       realm deny -a [-R realm]

DESCRIPTION

       realm is a command line tool that can be used to manage enrollment in kerberos realms,
       like Active Directory domains or IPA domains.

       See the various sub commands below. The following global options can be used:

       -i, --install=/path
           Run in install mode. This makes realmd chroot into the directory specified by an
           absolute path and place files in appropriate locations for use during an installer. No
           packages will be installed or services will be started when running in this mode.

       --unattended
           Run in unattended mode without prompting for input.

       -v, --verbose
           Display verbose diagnostics while doing running commands.

DISCOVER

       Discover a realm and its capabilities.

           $ realm discover

           $ realm discover domain.example.com

       After discovering a realm, its name, type and capabilities are displayed.

       If no domain is specified, then the domain assigned through DHCP is used as a default.

       The following options can be used:

       -a, --all
           Show all discovered realms (in various configurations).

       --client-software=xxx
           Only discover realms for which we can use the given client software. Possible values
           include sssd or winbind.

       -n, --name
           Only show the names of the discovered realms.

       --server-software=xxx
           Only discover realms which run the given server software. Possible values include
           active-directory or ipa.

       --membership-software=xxx
           Only discover realms for which the given membership software can be used to
           subsequently perform enrollment. Possible values include samba or adcli.

       --use-ldaps
           See option description in the section called “JOIN”.

JOIN

Configure the local machine for use with a realm.

$ realm join domain.example.com

$ realm join --user=admin --computer-ou=OU=Special domain.example.com

The realm is first discovered, as we would with the discover command. If no domain is
specified, then the domain assigned through DHCP is used as a default.

After a successful join, the computer will be in a state where it is able to resolve
remote user and group names from the realm. For kerberos realms, a computer account and
host keytab is created.

Joining arbitrary kerberos realms is not supported. The realm must have a supported
mechanism for joining from a client machine, such as Active Directory or IPA.

If the domain has been preconfigured, and unless --user is explicitly specified, an
automatic join is attempted first.

Note that the --user, --no-password, and --one-time-password options are mutually
exclusive. At most one of them can be specified.

It is generally possible to use kerberos credentials to perform a join operation. Use the
kinit command to acquire credentials prior to starting the join. Do not specify the --user
argument, the user will be selected automatically from the credential cache. The realm
respects the KRB5_CCACHE environment variable, but uses the default kerberos credential
cache if it's not present. Not all types of servers can be joined using kerberos
credentials, some (like IPA) insist on prompting for a password.

The following options can be used:

--automatic-id-mapping=no
Do not perform UID/GID mapping for users and groups, but expect these identifiers to
be present in the domain already.

--client-software=xxx
Only join realms for which we can use the given client software. Possible values
include sssd or winbind. Not all values are supported for all realms. By default the
client software is automatically selected.

--computer-ou=OU=xxx
The distinguished name of an organizational unit to create the computer account. The
exact format of the distinguished name depends on the client software and membership
software. You can usually omit the root DSE portion of distinguished name. This is an
Active Directory specific option.

--membership-software=xxx
The software to use when joining to the realm. Possible values include samba or adcli.
Not all values are supported for all realms. By default the membership software is
automatically selected.

--computer-name=xxx
This option only applies to Active Directory realms. Specify this option to override
the default name used when creating the computer account. The system's FQDN will still
be saved in the dNSHostName attribute.

Specify the name as a string of 15 or fewer characters that is a valid NetBIOS
computer name.

--no-password
Perform the join automatically without a password.

--one-time-password=xxxx
Perform the join using a one time password specified on the command line. This is not
possible with all types of realms.

--os-name=xxx
The name of the operation system of the client. When joining an AD domain the value is
store in the matching AD attribute.

--os-version=xxx
The version of the operation system of the client. When joining an AD domain the value
is store in the matching AD attribute.

--server-software=xxx
Only join realms for run the given server software. Possible values include
active-directory or ipa.

-U, --user=xxx
The user name to be used to authenticate with when joining the machine to the realm.
You will be prompted for a password.

--user-principal=host/name@REALM
Set the userPrincipalName field of the computer account to this kerberos principal. If
you omit the value for this option, then a principal will be set based on the defaults
of the membership software.

AD makes a distinction between user and service principals. Only with user principals
you can request a Kerberos Ticket-Granting-Ticket (TGT), i.e. only user principals can
be used with the kinit command. By default the user principal and the canonical
principal name of an AD computer account is shortname$@AD.DOMAIN, where shortname is
the NetBIOS name which is limited to 15 characters.

If there are applications which are not aware of the AD default and are using a
hard-coded default principal the --user-principal can be used to make AD aware of this
principal. Please note that userPrincipalName is a single value LDAP attribute, i.e.
only one alternative user principal besides the AD default user principal can be set.

--use-ldaps
Use the ldaps port when connecting to AD where possible. In general this option is not
needed because realmd itself only read public information from the Active Directory
domain controller which is available anonymously. The supported membership software
products will use encrypted connections protected with GSS-SPNEGO/GSSAPI which offers
a comparable level of security than ldaps. This option is only needed if the standard
LDAP port (389/tcp) is blocked by a firewall and only the LDAPS port (636/tcp) is
available. Given that and to lower the initial effort to discover a remote domain
realmd does not require a strict certificate check. If the validation of the LDAP
server certificate fails realmd will continue to setup the encrypted connection to the
LDAP server.

If this option is set to yes realmd will use the ldaps port when reading the rootDSE
and call the adcli membership software with the option --use-ldaps. The Samba base
membership currently offers only deprecated ways to enable ldaps. Support will be
added in realmd when a new way is available.

LEAVE

       Deconfigure the local machine for use with a realm.

           $ realm leave

           $ realm leave domain.example.com

       If no realm name is specified, then the first configured realm will be used.

       The following options can be used:

       --client-software=xxx
           Only leave the realm which is using the given client software. Possible values include
           sssd or winbind.

       --server-software=xxx
           Only leave the realm which is using the given server software. Possible values include
           active-directory or ipa.

       --remove
           Remove or disable computer account from the directory while leaving the realm. This
           will usually prompt for a pasword.

       -U, --user
           The user name to be used to authenticate with when leaving the realm. You will be
           prompted for a password. Implies --remove.

       --use-ldaps
           See option description in the section called “JOIN”.

LIST

       List all the discovered and configured realms.

           $ realm list

       By default, realms that have been discovered, but not configured (using the join command),
       are not displayed. Also, by default, the list of realm details displayed is verbose. The
       options below can be used to change this default behavior

       The following options can be used:

       --all
           Show all discovered realms (whether or not they have been configured).

       --name-only
           Display only realm names (as opposed to verbose output).

PERMIT

       Permit local login by users of the realm.

           $ realm permit --all
           $ realm permit user@example.com
           $ realm permit DOMAIN\\User2
           $ realm permit --withdraw user@example.com

       The current login policy and format of the user names can be seen by using the realm list
       command.

       The following options can be used:

       --all, -a
           Permit logins using realm accounts on the local machine according to the realm
           policy.This usually defaults to allowing any realm user to log in.

       --groups, -g
           Treat the specified names as groups rather than user login names. Permit login by
           users in the specified groups.

       --realm, -R
           Specify the of the realm to change login policy for.

       --withdraw, -x
           Remove a login from the list of realm accounts permitted to log into the machine.

DENY

       Deny local login by realm accounts.

           $ realm deny --all

       This command prevents realm accounts from logging into the local machine. Use realm permit
       to restrict logins to specific accounts.

       The following options can be used:

       --all, -a
           This option should be specified

       --realm, -R
           Specify the name of the realm to deny users login to.

AUTHOR

       Stef Walter <stef@thewalter.net>
           Maintainer