Provided by: infiniband-diags_42.0-1_amd64 bug


       smpquery - query InfiniBand subnet management attributes


       smpquery [options] <op> <dest dr_path|lid|guid> [op params]


       smpquery allows a basic subset of standard SMP queries including the following: node info,
       node description, switch info, port info. Fields are displayed in human readable format.


       Current supported operations (case insensitive) and their parameters:

          Nodeinfo (NI) <addr>

          Nodedesc (ND) <addr>

          Portinfo (PI) <addr> [<portnum>]     # default port is zero

          PortInfoExtended (PIE) <addr> [<portnum>]

          Switchinfo (SI) <addr>

          PKeyTable (PKeys) <addr> [<portnum>]

          SL2VLTable (SL2VL) <addr> [<portnum>]

          VLArbitration (VLArb) <addr> [<portnum>]

          GUIDInfo (GI) <addr>

          MlnxExtPortInfo (MEPI) <addr> [<portnum>]  # default port is zero

       -c, --combined
              Use Combined route address argument <lid> <DR_Path>

       -x, --extended
              Set SMSupportsExtendedSpeeds bit 31 in  AttributeModifier  (only  impacts  PortInfo

       -K, --show_keys
              show security keys (mkey, smkey, etc.) associated with the request.

   Addressing Flags
       -D, --Direct     The address specified is a directed route

             [options] -D [options] "0"          # self port
             [options] -D [options] "0,1,2,1,4"  # out via port 1, then 2, ...

             (Note the second number in the path specified must match the port being
             used.  This can be specified using the port selection flag '-P' or the
             port found through the automatic selection process.)

       -G, --Guid     The address specified is a Port GUID

       -L, --Lid   The address specified is a LID

       -s, --sm_port <smlid>     use 'smlid' as the target lid for SA queries.

   Port Selection flags
       -C, --Ca <ca_name>    use the specified ca_name.

       -P, --Port <ca_port>    use the specified ca_port.

   Local port Selection
       Multiple  port/Multiple CA support: when no IB device or port is specified (see the "local
       umad parameters" below), the libibumad library selects the port to use  by  the  following

          1. the first port that is ACTIVE.

          2. if not found, the first port that is UP (physical link up).

          If  a  port  and/or CA name is specified, the libibumad library attempts to fulfill the
          user request, and will fail if it is not possible.

          For example:

              ibaddr                 # use the first port (criteria #1 above)
              ibaddr -C mthca1       # pick the best port from "mthca1" only.
              ibaddr -P 2            # use the second (active/up) port from the first available IB device.
              ibaddr -C mthca0 -P 2  # use the specified port only.

   Debugging flags
       -d     raise the IB debugging level.  May be used several times (-ddd or -d -d -d).

       -e     show send and receive errors (timeouts and others)

       -h, --help      show the usage message

       -v, --verbose
              increase the application verbosity level.  May be used several times (-vv or -v  -v

       -V, --version     show the version info.

   Configuration flags
       -t, --timeout <timeout_ms> override the default timeout for the solicited mads.

       --node-name-map <node-name-map> Specify a node name map.
          This file maps GUIDs to more user friendly names.  See FILES section.

       -y, --m_key <key>
              use  the specified M_key for requests. If non-numeric value (like 'x') is specified
              then a value will be prompted for.

       --config, -z  <config_file> Specify alternate config file.
          Default: /etc/infiniband-diags/ibdiag.conf



       A global config file is provided to set some of the common options  for  all  tools.   See
       supplied config file for details.

       The  node  name map is used to specify user friendly names for nodes in the output.  GUIDs
       are used to perform the lookup.

       This functionality is provided by the opensm-libs package.  See  opensm(8)  for  the  file
       location for your installation.


          # comment
          <guid> "<name>"


          # IB1
          # Line cards
          0x0008f104003f125c "IB1 (Rack 11 slot 1   ) ISR9288/ISR9096 Voltaire sLB-24D"
          0x0008f104003f125d "IB1 (Rack 11 slot 1   ) ISR9288/ISR9096 Voltaire sLB-24D"
          0x0008f104003f10d2 "IB1 (Rack 11 slot 2   ) ISR9288/ISR9096 Voltaire sLB-24D"
          0x0008f104003f10d3 "IB1 (Rack 11 slot 2   ) ISR9288/ISR9096 Voltaire sLB-24D"
          0x0008f104003f10bf "IB1 (Rack 11 slot 12  ) ISR9288/ISR9096 Voltaire sLB-24D"

          # Spines
          0x0008f10400400e2d "IB1 (Rack 11 spine 1   ) ISR9288 Voltaire sFB-12D"
          0x0008f10400400e2e "IB1 (Rack 11 spine 1   ) ISR9288 Voltaire sFB-12D"
          0x0008f10400400e2f "IB1 (Rack 11 spine 1   ) ISR9288 Voltaire sFB-12D"
          0x0008f10400400e31 "IB1 (Rack 11 spine 2   ) ISR9288 Voltaire sFB-12D"
          0x0008f10400400e32 "IB1 (Rack 11 spine 2   ) ISR9288 Voltaire sFB-12D"

          # GUID   Node Name
          0x0008f10400411a08 "SW1  (Rack  3) ISR9024 Voltaire 9024D"
          0x0008f10400411a28 "SW2  (Rack  3) ISR9024 Voltaire 9024D"
          0x0008f10400411a34 "SW3  (Rack  3) ISR9024 Voltaire 9024D"
          0x0008f104004119d0 "SW4  (Rack  3) ISR9024 Voltaire 9024D"


       ::     smpquery  portinfo  3  1                      # portinfo by lid, with port modifier
              smpquery -G switchinfo 0x2C9000100D051 1  # switchinfo by guid smpquery -D nodeinfo
              0                     #  nodeinfo  by  direct  route  smpquery  -c  nodeinfo 6 0,12
              # nodeinfo by combined route


       smpdump (8)


       Hal Rosenstock
              < >

                                            2017-08-21                                SMPQUERY(8)