Provided by: tgt_1.0.80-1ubuntu2_amd64
tgtd - The SCSI Target Daemon
tgtd tgtd [-C --control-port <INTEGER>] [-d --debug <INTEGER>] [-f --foregound] [-h --help] [--iscsi <...>]
Tgtd is a SCSI Target daemon. It can be used to provide SCSI target service to a network. The most common service is iSCSI but other services are also supported.
Tgtd provides support for both emulated and passthrough of real devices. Tgtd can emulate the following types of devices: disk : Normal disk device. Emulates a SCSI harddisk. tape : Tape device. Emulates a SCSI tape drive. cd : CD device. Emulates a SCSI DVD burner. changer : Media changer. Emulate the changer device for a virtual tape library or DVD jukebox.
-d --debug <INTEGER> Set to non-zero value to activate additional debugging messages to be logged. -f --foreground Run the daemon in the foreground. -h --help Print help text to the screen. -C --control-port <INTEGER> This comamnd is used to specify the control port to use for this instance of tgtd. This allows to run multiple instances of TGTD on a host. TGTADM has a matching argument to control which instance to connect to. --iscsi <...> ISCSI specific options. See the ISCSI section below for options specific to this frontend.
These parameters apply only to the iSCSI frontend. portal=<ip-address[:port]> This option is used to bind tgtd to a specific ip-address/portal and/or port. By default tgtd will bind to port 3260 on the wildcard address. The ip-address part (before the ":") can be missing to designate the wildcard address with a none-default port. Example: to bind tgtd to a specific address and port tgtd --iscsi portal=192.0.2.1:3260 Example: to bind tgtd to any address but a none-default port tgtd --iscsi portal=:3251 nop_interval=<integer> This sets the default interval for sending NOP-OUT to probe for connected initiators. This parameter only controls the default value for targets. Individual targets can be controlled using tgtadm. The default value is 0 which means that the feature is disabled TGTD will not send any NOP-OUT probes. nop_count=<integer> This sets the default value for after how many failed probes TGTD will consider the initiator dead and tear down the session. This parameter only controls the default value for targets. Individual targets can be controlled using tgtadm. The default value is 0. Example: send NOP-OUT every 5 seconds and abort the session after 6 failures. tgtd --iscsi portal=192.0.2.1:3260,nop_interval=5,nop_count=6
TGT_IPC_SOCKET=<path> When set tgtd and tgtadm will use the specified path as the IPC socket instead of the default '/var/run/tgtd/socket.0'
targets.conf(5), tgtadm(8), tgt-admin(8), tgtimg(8), tgt-setup-lun(8). http://stgt.sourceforge.net/
This program is free software; you can redistribute it and/or modify it under the terms of the GNU General Public License as published by the Free Software Foundation; either version 2 of the License, or (at your option) any later version. This program is distributed in the hope that it will be useful, but WITHOUT ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for more details. You should have received a copy of the GNU General Public License along with this program; if not, see http://www.gnu.org/licenses/. [FIXME: source] 02/16/2022 TGTD(8)