Provided by: catkin-lint_1.6.18-2_all bug

NAME

       catkin_lint - check catkin packages for common errors

SYNOPSIS

       catkin_lint [--config FILE] [--quiet | --no-quiet]
                   [--severity-level LEVEL]
                   [--notice ID] [--warning ID] [--error ID]
                   [--ignore ID] [--show-ignored]
                   [--strict | --no-strict]
                   [--pkg PKG] [--skip-pkg PKG]
                   [--package-path PATH] [--skip-path MATCH]
                   [--rosdistro DISTRO] [--offline] [--no-offline]
                   [--resolve-env | --no-resolve-env]
                   [--output FORMAT | --text | --explain | --xml | --json]
                   [--color MODE]
                   [PATH [PATH ...]]

DESCRIPTION

       catkin_lint checks package configurations for the catkin build system of ROS.  It runs a
       static analysis of the "package.xml" and "CMakeLists.txt" files in your package, and it
       will detect and report a number of common problems.

       All diagnosed problems come in one of three possible severities:

       Errors are severe enough to break the build and/or produce unintended side effects.
       Usually, they violate the rules outlined in the catkin manual.

       Warnings are potential errors which may indicate a bug in your package but may be
       justified for reasons catkin_lint cannot discern. Constructs which trigger a warning can
       usually be modified in a way that is functionally equivalent but more robust.

       Notices are issues which are not objectionable from a technical view point but should be
       addressed to improve the quality of the package. Many notices highlight violations of the
       recommendations and best practises from the catkin manual.

OPTIONS

       --config FILE
           Read configuration settings from FILE. This option can be used multiple times.  See
           "CONFIGURATION FILE FORMAT" for details.

       --quiet, -q
           Suppress all outputs expect for the detected problems, in particular, do not show the
           summary at the end.

       --no-quiet
           Show a summary of the findings at the end. This is the default setting.

       --severity-level LEVEL, -W LEVEL
           Choose the severity level for diagnostic output. Level 0 displays errors only, level 1
           displays errors and warnings, and level 2 displays everything. The default setting is
           -W1.

       --notice ID, --warning ID, --error ID
           Override the default severity of certain problems. See "PROBLEM IDS" for details on
           the available IDs.

       --ignore ID
           Ignore a problem. This is mostly useful to work around a known bug in catkin_lint,
           because problems tend to not go away if you ignore them. See "PROBLEM IDS" for details
           on the available IDs.

       --show-ignored
           Show all problems you ignored. Use this if an ignored problem did not go away, but you
           forgot which one.

       --strict
           Treat any reported problem as a fatal error. Some people use the option to enforce
           that warnings get fixed, too. You can also combine this with -W2 to turn even notices
           into errors, if you are exceptionally pedantic and/or have a high pain tolerance.

       --no-strict
           This will undo the effects of your rash decision to put "strict=yes" in your
           configuration file. This is also the default setting.

       --pkg PKG
           Check the package PKG for problems. The package must be in the ROS package search
           path.

       --skip-pkg PKG
           Skip the package PKG when processing a package subtree. The package will not be
           linted, but it will be treated as a known package for dependency resolutions.

       --package-path PATH[:PATH[...]]
           Add one or more additional locations to the ROS package search path. Separate multiple
           locations with ":". catkin_lint will use this path list and the ROS_PACKAGE_PATH
           environment variable to resolve the --pkg option and dependencies of linted packages.

       --skip-path MATCH
           Skip packages if their location contains MATCH. No wildcards or pattern matching
           allowed, only proper substrings are recognized.

       --rosdistro DISTRO
           Assume that all packages are supposed to work with the ROS distribution DISTRO. By
           default, this value is taken from the ROS_DISTRO environment variable. catkin_lint
           will use this to query the ROS database for packages which are not locally installed.

       --offline
           Forbid metadata queries to the ROS package index. This will disable certain
           diagnostics which rely on knowing details about all package dependencies. Metadata
           queries are not needed for packages which can be found locally through the ROS package
           search path.

       --no-offline
           Allow metadata queries to the ROS package index. This is the default.

       --resolve-env
           Resolve environment variables $ENV{} in CMake scripts. By default, catkin_lint will
           treat all environment variables like empty strings and issue a warning.

       --no-resolve-env
           Do not resolve environment variables $ENV{} in CMake scripts and issue a warning if
           they are used. This is the default.

       --output FORMAT
           Select the output format for the diagnosed problems. Valid output formats are text,
           explain, json, and xml. See "OUTPUT FORMATS" for more details.

       --text, --explain, --json, --xml
           These are deprecated aliases for --output FORMAT.

       --color MODE
           Configure the colorization of the text and explain output formats. The default mode is
           auto, which will use ANSI colors if catkin_lint detects a terminal as output. The
           modes always and never will override the detection and output ANSI colors always or
           never, respectively.

OUTPUT FORMATS

       catkin_lint supports a variety of output formats as argument for the --output option:

       text
           This is the default format, which outputs a short, human-readable description of all
           problems.

       explain
           This is an extended text format, which will show an additional explanation when a
           problem type occurs for the first time. It will also mention the message ID which you
           need to change the severity or ignore a problem.

       json
           Outputs all problems in JSON format.

       xml Outputs all problems in XML format.

ENVIRONMENT

       catkin_lint uses ROS_PACKAGE_PATH to find locally available packages and ROS_DISTRO to
       determine the installed ROS distribution when querying the ROS package index or the rosdep
       database.  All other environment variables will be ignored, unless catkin_lint is
       instructed to resolve them in CMake scripts by --resolve-env.

RETURN VALUES

       0   All packages were linted successfully and no errors occurred.

       1   An error occurred.

       66  No packages found.

CONFIGURATION FILE FORMAT

       catkin_lint will look for configuration options in the following files:

       •   Files explicitly specified using --config.catkin_lint files in all locations from ROS_PACKAGE_PATH$XDG_CONFIG_HOME/catkin_lint~/.config/catkin_lint if XDG_CONFIG_HOME is unset or empty

       •   ~/.catkin_lint

       catkin_lint will read all available configuration files and merge them into a single
       configuration. Earlier entries in the above list will take precedence if conflicting
       options are found. Command line arguments will override any configuration file setting.
       Configuration files are in an INI-style format with one or more sections in it.

   [catkin_lint] section
       The main section is called "[catkin_lint]" and will take the following catkin_lint
       specific options:

       color = auto | never | always
           Determine output colorization mode. The default setting auto will enable colorization
           if and only if standard output is connected to terminal. The modes always and never
           will override the detection and output ANSI colors always or never, respectively.

       offline = no | yes
           Allow or forbid metadata queries to the ROS package index. This will disable certain
           diagnostics which rely on knowing details about all package dependencies. Metadata
           queries are not needed for packages which can be found locally through the ROS package
           search path. The default setting is no.

       output = text | explain | json | xml
           Select the output format for problem reports. See "OUTPUT FORMATS" for details.  The
           default setting is text.

       package_path = PATH[:PATH[...]]
           Prepend the specified PATHs to ROS_PACKAGE_PATH in order to find locally available
           packages and/or package dependencies.

       quiet = no | yes
           Select output verbosity. The default setting no allows catkin_lint to print some
           additional information to standard error, such as a final summary of all detected
           problems.

       resolve_env = no | yes
           Allow or forbid resolution of environment variables. The default setting no lets
           catkin_lint ignore environment variables and issue a warning whenever a CMake command
           references the environment using $ENV{}.

       rosdistro = DISTRO
           Assume that all packages are supposed to work with the ROS distribution DISTRO.  By
           default, this value is taken from the ROS_DISTRO environment variable.  catkin_lint
           will use this to query the ROS database for packages which are not locally installed.

       severity_level = 0 | 1 | 2
           Choose the severity level for diagnostic output. Level 0 displays errors only, level 1
           displays errors and warnings, and level 2 displays everything. The default setting is
           1.

       strict = no | yes
           In strict mode, catkin_lint will treat every reported problem as error and return with
           exit code 1 (see "RETURN VALUES"). By default, warnings and notices are informational
           only. This setting is mostly interesting for automated test runs, where the exit code
           is evaluated. Note that ignored problems and everything hidden by the chosen
           severity_level will not be considered failures.

   Package-specific severity overrides
       All section names besides "[catkin_lint]" are interpreted as package names and will
       override the reported severities of problems. As a special case, the section "[*]" will
       apply to all packages. The overrides are specified in the format "ID = Severity", where
       the severity can be one of ignore, error, warning, notice, or default. See "PROBLEM IDS"
       for details on the available IDs.

       Unlike --strict, this gives you very fine-grained control over which problems are supposed
       to be fatal, so you are encouraged to integrate catkin_lint into your CI test pipeline and
       tune the settings in a way that fits your project.

PROBLEM IDS

       You can run catkin_lint --help-problem to get a list of all problem IDs, and catkin_lint
       --help-problem ID for a more detailed explanation of each problem.

EXAMPLES

   Command line arguments
       catkin_lint ~/catkin_ws/src
           Check all packages in ~/catkin_ws/src for problems.

       catkin_lint --pkg foo --pkg bar
           Check the packages "foo" and "bar" for problems, assuming that they can be found in
           one of the locations listed in ROS_PACKAGE_PATH.

       catkin_lint --pkg foo --pkg bar --package-path ~/my_other_ws/src
           Check the packages "foo" and "bar" for problems when the former assumption turned out
           to be false.

       catkin_lint ~/catkin_ws/src --skip-path unstable
           Check all packages in ~/catkin_ws/src, but skip all packages in a path that contains
           the string "unstable".

       catkin_lint ~/catkin_ws/src --skip-pkg baz
           Check all packages except "baz" in ~/catkin_ws/src.

   Configuration file
       The following configuration file will instruct catkin_lint to output its results in JSON
       format, ignore any problems with unknown packages (except in the package foo), and elevate
       the notice about unsorted lists to a warning for all packages (including foo):

           [catkin_lint]
           output = json
           quiet = yes

           [*]
           unknown_package = ignore
           unsorted_list = warning

           [foo]
           unknown_package = default

REFERENCES

       <https://fkie.github.io/catkin_lint/>