Provided by: less_590-1build1_amd64 
NAME
lesskey - specify key bindings for less
SYNOPSIS (deprecated)
lesskey [-o output] [--] [input]
lesskey [--output=output] [--] [input]
lesskey -V
lesskey --version
SCOPE
This document describes the format of the lesskey source file, which is used by less
version 582 and later. In previous versions of less, a separate program called lesskey
was used to compile the lesskey source file into a format understood by less. This
compilation step is no longer required and the lesskey program is therefore deprecated
although the file format remains supported by less itself.
FILE FORMAT
The input file consists of one or more sections. Each section starts with a line that
identifies the type of section. Possible sections are:
#command
Defines new command keys.
#line-edit
Defines new line-editing keys.
#env Defines environment variables.
Blank lines and lines which start with a pound sign (#) are ignored, except for the
special section header lines.
COMMAND SECTION
The command section begins with the line
#command
If the command section is the first section in the file, this line may be omitted. The
command section consists of lines of the form:
string <whitespace> action [extra-string] <newline>
Whitespace is any sequence of one or more spaces and/or tabs. The string is the command
key(s) which invoke the action. The string may be a single command key, or a sequence of
up to 15 keys. The action is the name of the less action, from the list below. The
characters in the string may appear literally, or be prefixed by a caret to indicate a
control key. A backslash followed by one to three octal digits may be used to specify a
character by its octal value. A backslash followed by certain characters specifies input
characters as follows:
\b BACKSPACE
\e ESCAPE
\n NEWLINE
\r RETURN
\t TAB
\ku UP ARROW
\kd DOWN ARROW
\kr RIGHT ARROW
\kl LEFT ARROW
\kU PAGE UP
\kD PAGE DOWN
\kh HOME
\ke END
\kx DELETE
A backslash followed by any other character indicates that character is to be taken
literally. Characters which must be preceded by backslash include caret, space, tab and
the backslash itself.
An action may be followed by an "extra" string. When such a command is entered while
running less, the action is performed, and then the extra string is parsed, just as if it
were typed in to less. This feature can be used in certain cases to extend the
functionality of a command. For example, see the "{" and ":t" commands in the example
below. The extra string has a special meaning for the "quit" action: when less quits, the
first character of the extra string is used as its exit status.
EXAMPLE
The following input file describes the set of default command keys used by less:
#command
\r forw-line
\n forw-line
e forw-line
j forw-line
\kd forw-line
^E forw-line
^N forw-line
k back-line
y back-line
^Y back-line
^K back-line
^P back-line
J forw-line-force
K back-line-force
Y back-line-force
d forw-scroll
^D forw-scroll
u back-scroll
^U back-scroll
\40 forw-screen
f forw-screen
^F forw-screen
^V forw-screen
\kD forw-screen
b back-screen
^B back-screen
\ev back-screen
\kU back-screen
z forw-window
w back-window
\e\40 forw-screen-force
F forw-forever
\eF forw-until-hilite
R repaint-flush
r repaint
^R repaint
^L repaint
\eu undo-hilite
\eU clear-search
g goto-line
\kh goto-line
< goto-line
\e< goto-line
p percent
% percent
\e[ left-scroll
\e] right-scroll
\e( left-scroll
\e) right-scroll
\kl left-scroll
\kr right-scroll
\e{ no-scroll
\e} end-scroll
{ forw-bracket {}
} back-bracket {}
( forw-bracket ()
) back-bracket ()
[ forw-bracket []
] back-bracket []
\e^F forw-bracket
\e^B back-bracket
G goto-end
\e> goto-end
> goto-end
\ke goto-end
\eG goto-end-buffered
= status
^G status
:f status
/ forw-search
? back-search
\e/ forw-search *
\e? back-search *
n repeat-search
\en repeat-search-all
N reverse-search
\eN reverse-search-all
& filter
m set-mark
M set-mark-bottom
\em clear-mark
' goto-mark
^X^X goto-mark
E examine
:e examine
^X^V examine
:n next-file
:p prev-file
t next-tag
T prev-tag
:x index-file
:d remove-file
- toggle-option
:t toggle-option t
s toggle-option o
_ display-option
| pipe
v visual
! shell
+ firstcmd
H help
h help
V version
0 digit
1 digit
2 digit
3 digit
4 digit
5 digit
6 digit
7 digit
8 digit
9 digit
q quit
Q quit
:q quit
:Q quit
ZZ quit
PRECEDENCE
Commands specified by lesskey take precedence over the default commands. A default
command key may be disabled by including it in the input file with the action "invalid".
Alternatively, a key may be defined to do nothing by using the action "noaction".
"noaction" is similar to "invalid", but less will give an error beep for an "invalid"
command, but not for a "noaction" command. In addition, ALL default commands may be
disabled by adding this control line to the input file:
#stop
This will cause all default commands to be ignored. The #stop line should be the last
line in that section of the file.
Be aware that #stop can be dangerous. Since all default commands are disabled, you must
provide sufficient commands before the #stop line to enable all necessary actions. For
example, failure to provide a "quit" command can lead to frustration.
LINE EDITING SECTION
The line-editing section begins with the line:
#line-edit
This section specifies new key bindings for the line editing commands, in a manner similar
to the way key bindings for ordinary commands are specified in the #command section. The
line-editing section consists of a list of keys and actions, one per line as in the
example below.
EXAMPLE
The following input file describes the set of default line-editing keys used by less:
#line-edit
\t forw-complete
\17 back-complete
\e\t back-complete
^L expand
^V literal
^A literal
\el right
\kr right
\eh left
\kl left
\eb word-left
\e\kl word-left
\ew word-right
\e\kr word-right
\ei insert
\ex delete
\kx delete
\eX word-delete
\ekx word-delete
\e\b word-backspace
\e0 home
\kh home
\e$ end
\ke end
\ek up
\ku up
\ej down
^G abort
LESS ENVIRONMENT VARIABLES
The environment variable section begins with the line
#env
Following this line is a list of environment variable assignments. Each line consists of
an environment variable name, an equals sign (=) and the value to be assigned to the
environment variable. White space before and after the equals sign is ignored. Variables
assigned in this way are visible only to less. If a variable is specified in the system
environment and also in a lesskey file, the value in the lesskey file takes precedence.
Although the lesskey file can be used to override variables set in the environment, the
main purpose of assigning variables in the lesskey file is simply to have all less
configuration information stored in one file.
EXAMPLE
The following input file sets the -i option whenever less is run, and specifies the
character set to be "latin1":
#env
LESS = -i
LESSCHARSET = latin1
SEE ALSO
less(1)
WARNINGS
On MS-DOS and OS/2 systems, certain keys send a sequence of characters which start with a
NUL character (0). This NUL character should be represented as \340 in a lesskey file.
COPYRIGHT
Copyright (C) 1984-2021 Mark Nudelman
less is part of the GNU project and is free software. You can redistribute it and/or
modify it under the terms of either (1) the GNU General Public License as published by the
Free Software Foundation; or (2) the Less License. See the file README in the less
distribution for more details regarding redistribution. You should have received a copy
of the GNU General Public License along with the source for less; see the file COPYING.
If not, write to the Free Software Foundation, 59 Temple Place, Suite 330, Boston, MA
02111-1307, USA. You should also have received a copy of the Less License; see the file
LICENSE.
less is distributed in the hope that it will be useful, but WITHOUT ANY WARRANTY; without
even the implied warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
GNU General Public License for more details.
AUTHOR
Mark Nudelman
Report bugs at https://github.com/gwsw/less/issues.
Version 590: 03 Jun 2021 LESSKEY(1)