Provided by: linux-tools-common_5.19.0-21.21_all 
NAME
perf-list - List all symbolic event types
SYNOPSIS
perf list [--no-desc] [--long-desc]
[hw|sw|cache|tracepoint|pmu|sdt|metric|metricgroup|event_glob]
DESCRIPTION
This command displays the symbolic event types which can be selected in the various perf
commands with the -e option.
OPTIONS
-d, --desc
Print extra event descriptions. (default)
--no-desc
Don’t print descriptions.
-v, --long-desc
Print longer event descriptions.
--debug
Enable debugging output.
--details
Print how named events are resolved internally into perf events, and also any extra
expressions computed by perf stat.
--deprecated
Print deprecated events. By default the deprecated events are hidden.
--cputype
Print events applying cpu with this type for hybrid platform (e.g. --cputype core or
--cputype atom)
EVENT MODIFIERS
Events can optionally have a modifier by appending a colon and one or more modifiers.
Modifiers allow the user to restrict the events to be counted. The following modifiers
exist:
u - user-space counting
k - kernel counting
h - hypervisor counting
I - non idle counting
G - guest counting (in KVM guests)
H - host counting (not in KVM guests)
p - precise level
P - use maximum detected precise level
S - read sample value (PERF_SAMPLE_READ)
D - pin the event to the PMU
W - group is weak and will fallback to non-group if not schedulable,
e - group or event are exclusive and do not share the PMU
The p modifier can be used for specifying how precise the instruction address should be.
The p modifier can be specified multiple times:
0 - SAMPLE_IP can have arbitrary skid
1 - SAMPLE_IP must have constant skid
2 - SAMPLE_IP requested to have 0 skid
3 - SAMPLE_IP must have 0 skid, or uses randomization to avoid
sample shadowing effects.
For Intel systems precise event sampling is implemented with PEBS which supports up to
precise-level 2, and precise level 3 for some special cases
On AMD systems it is implemented using IBS (up to precise-level 2). The precise modifier
works with event types 0x76 (cpu-cycles, CPU clocks not halted) and 0xC1 (micro-ops
retired). Both events map to IBS execution sampling (IBS op) with the IBS Op Counter
Control bit (IbsOpCntCtl) set respectively (see the Core Complex (CCX) → Processor x86
Core → Instruction Based Sampling (IBS) section of the [AMD Processor Programming
Reference (PPR)] relevant to the family, model and stepping of the processor being used).
Manual Volume 2: System Programming, 13.3 Instruction-Based Sampling). Examples to use
IBS:
perf record -a -e cpu-cycles:p ... # use ibs op counting cycles
perf record -a -e r076:p ... # same as -e cpu-cycles:p
perf record -a -e r0C1:p ... # use ibs op counting micro-ops
RAW HARDWARE EVENT DESCRIPTOR
Even when an event is not available in a symbolic form within perf right now, it can be
encoded in a per processor specific way.
For instance on x86 CPUs, N is a hexadecimal value that represents the raw register
encoding with the layout of IA32_PERFEVTSELx MSRs (see [Intel® 64 and IA-32 Architectures
Software Developer’s Manual Volume 3B: System Programming Guide] Figure 30-1 Layout of
IA32_PERFEVTSELx MSRs) or AMD’s PERF_CTL MSRs (see the Core Complex (CCX) → Processor x86
Core → MSR Registers section of the [AMD Processor Programming Reference (PPR)] relevant
to the family, model and stepping of the processor being used).
Note: Only the following bit fields can be set in x86 counter registers: event, umask,
edge, inv, cmask. Esp. guest/host only and OS/user mode flags must be setup using EVENT
MODIFIERS.
Example:
If the Intel docs for a QM720 Core i7 describe an event as:
Event Umask Event Mask
Num. Value Mnemonic Description Comment
A8H 01H LSD.UOPS Counts the number of micro-ops Use cmask=1 and
delivered by loop stream detector invert to count
cycles
raw encoding of 0x1A8 can be used:
perf stat -e r1a8 -a sleep 1
perf record -e r1a8 ...
It’s also possible to use pmu syntax:
perf record -e r1a8 -a sleep 1
perf record -e cpu/r1a8/ ...
perf record -e cpu/r0x1a8/ ...
Some processors, like those from AMD, support event codes and unit masks larger than a
byte. In such cases, the bits corresponding to the event configuration parameters can be
seen with:
cat /sys/bus/event_source/devices/<pmu>/format/<config>
Example:
If the AMD docs for an EPYC 7713 processor describe an event as:
Event Umask Event Mask
Num. Value Mnemonic Description
28FH 03H op_cache_hit_miss.op_cache_hit Counts Op Cache micro-tag
hit events.
raw encoding of 0x0328F cannot be used since the upper nibble of the EventSelect bits have
to be specified via bits 32-35 as can be seen with:
cat /sys/bus/event_source/devices/cpu/format/event
raw encoding of 0x20000038F should be used instead:
perf stat -e r20000038f -a sleep 1
perf record -e r20000038f ...
It’s also possible to use pmu syntax:
perf record -e r20000038f -a sleep 1
perf record -e cpu/r20000038f/ ...
perf record -e cpu/r0x20000038f/ ...
You should refer to the processor specific documentation for getting these details. Some
of them are referenced in the SEE ALSO section below.
ARBITRARY PMUS
perf also supports an extended syntax for specifying raw parameters to PMUs. Using this
typically requires looking up the specific event in the CPU vendor specific documentation.
The available PMUs and their raw parameters can be listed with
ls /sys/devices/*/format
For example the raw event "LSD.UOPS" core pmu event above could be specified as
perf stat -e cpu/event=0xa8,umask=0x1,name=LSD.UOPS_CYCLES,cmask=0x1/ ...
or using extended name syntax
perf stat -e cpu/event=0xa8,umask=0x1,cmask=0x1,name=\'LSD.UOPS_CYCLES:cmask=0x1\'/ ...
PER SOCKET PMUS
Some PMUs are not associated with a core, but with a whole CPU socket. Events on these
PMUs generally cannot be sampled, but only counted globally with perf stat -a. They can be
bound to one logical CPU, but will measure all the CPUs in the same socket.
This example measures memory bandwidth every second on the first memory controller on
socket 0 of a Intel Xeon system
perf stat -C 0 -a uncore_imc_0/cas_count_read/,uncore_imc_0/cas_count_write/ -I 1000 ...
Each memory controller has its own PMU. Measuring the complete system bandwidth would
require specifying all imc PMUs (see perf list output), and adding the values together. To
simplify creation of multiple events, prefix and glob matching is supported in the PMU
name, and the prefix uncore_ is also ignored when performing the match. So the command
above can be expanded to all memory controllers by using the syntaxes:
perf stat -C 0 -a imc/cas_count_read/,imc/cas_count_write/ -I 1000 ...
perf stat -C 0 -a *imc*/cas_count_read/,*imc*/cas_count_write/ -I 1000 ...
This example measures the combined core power every second
perf stat -I 1000 -e power/energy-cores/ -a
ACCESS RESTRICTIONS
For non root users generally only context switched PMU events are available. This is
normally only the events in the cpu PMU, the predefined events like cycles and
instructions and some software events.
Other PMUs and global measurements are normally root only. Some event qualifiers, such as
"any", are also root only.
This can be overridden by setting the kernel.perf_event_paranoid sysctl to -1, which
allows non root to use these events.
For accessing trace point events perf needs to have read access to
/sys/kernel/debug/tracing, even when perf_event_paranoid is in a relaxed setting.
TRACING
Some PMUs control advanced hardware tracing capabilities, such as Intel PT, that allows
low overhead execution tracing. These are described in a separate intel-pt.txt document.
PARAMETERIZED EVENTS
Some pmu events listed by perf-list will be displayed with ? in them. For example:
hv_gpci/dtbp_ptitc,phys_processor_idx=?/
This means that when provided as an event, a value for ? must also be supplied. For
example:
perf stat -C 0 -e 'hv_gpci/dtbp_ptitc,phys_processor_idx=0x2/' ...
EVENT QUALIFIERS:
It is also possible to add extra qualifiers to an event:
percore:
Sums up the event counts for all hardware threads in a core, e.g.:
perf stat -e cpu/event=0,umask=0x3,percore=1/
EVENT GROUPS
Perf supports time based multiplexing of events, when the number of events active exceeds
the number of hardware performance counters. Multiplexing can cause measurement errors
when the workload changes its execution profile.
When metrics are computed using formulas from event counts, it is useful to ensure some
events are always measured together as a group to minimize multiplexing errors. Event
groups can be specified using { }.
perf stat -e '{instructions,cycles}' ...
The number of available performance counters depend on the CPU. A group cannot contain
more events than available counters. For example Intel Core CPUs typically have four
generic performance counters for the core, plus three fixed counters for instructions,
cycles and ref-cycles. Some special events have restrictions on which counter they can
schedule, and may not support multiple instances in a single group. When too many events
are specified in the group some of them will not be measured.
Globally pinned events can limit the number of counters available for other groups. On x86
systems, the NMI watchdog pins a counter by default. The nmi watchdog can be disabled as
root with
echo 0 > /proc/sys/kernel/nmi_watchdog
Events from multiple different PMUs cannot be mixed in a group, with some exceptions for
software events.
LEADER SAMPLING
perf also supports group leader sampling using the :S specifier.
perf record -e '{cycles,instructions}:S' ...
perf report --group
Normally all events in an event group sample, but with :S only the first event (the
leader) samples, and it only reads the values of the other events in the group.
However, in the case AUX area events (e.g. Intel PT or CoreSight), the AUX area event must
be the leader, so then the second event samples, not the first.
OPTIONS
Without options all known events will be listed.
To limit the list use:
1. hw or hardware to list hardware events such as cache-misses, etc.
2. sw or software to list software events such as context switches, etc.
3. cache or hwcache to list hardware cache events such as L1-dcache-loads, etc.
4. tracepoint to list all tracepoint events, alternatively use subsys_glob:event_glob to
filter by tracepoint subsystems such as sched, block, etc.
5. pmu to print the kernel supplied PMU events.
6. sdt to list all Statically Defined Tracepoint events.
7. metric to list metrics
8. metricgroup to list metricgroups with metrics.
9. If none of the above is matched, it will apply the supplied glob to all events,
printing the ones that match.
10. As a last resort, it will do a substring search in all event names.
One or more types can be used at the same time, listing the events for the types
specified.
Support raw format:
1. --raw-dump, shows the raw-dump of all the events.
2. --raw-dump [hw|sw|cache|tracepoint|pmu|event_glob], shows the raw-dump of a certain
kind of events.
SEE ALSO
perf-stat(1), perf-top(1), perf-record(1), Intel® 64 and IA-32 Architectures Software
Developer’s Manual Volume 3B: System Programming Guide[1], AMD Processor Programming
Reference (PPR)[2]
NOTES
1. Intel® 64 and IA-32 Architectures Software Developer’s Manual Volume 3B: System
Programming Guide
http://www.intel.com/sdm/
2. AMD Processor Programming Reference (PPR)
https://bugzilla.kernel.org/show_bug.cgi?id=206537