Provided by: python3-phonopy_2.15.1-1_amd64 
NAME
phonopy-load - manual page for phonopy-load 2.15.1
DESCRIPTION
usage: phonopy-load [-h] [--abinit] [--aims] [--cp2k] [--crystal] [--dftb+]
[--elk] [--qe] [--siesta] [--turbomole] [--vasp]
[--wien2k] [--castep] [--fleur] [--alm] [--amplitude DISPLACEMENT_DISTANCE]
[--anime ANIME [ANIME ...]] [--band BAND_PATHS [BAND_PATHS ...]]
[--band-connection] [--band-const-interval] [--band-labels BAND_LABELS [BAND_LABELS
...]] [--band-format BAND_FORMAT] [--band-points BAND_POINTS] [--bi BAND_INDICES
[BAND_INDICES ...]] [--config FILE] [--cutoff-freq CUTOFF_FREQUENCY]
[--cutoff-radius CUTOFF_RADIUS] [--dense-svecs] [--dm-decimals
DYNAMICAL_MATRIX_DECIMALS] [--dos] [--eigvecs] [--exclude-born] [-f
CREATE_FORCE_SETS [CREATE_FORCE_SETS ...]] [--factor FREQUENCY_CONVERSION_FACTOR]
[--fc FILE] [--fc-calc-opt FC_CALCULATOR_OPTIONS] [--fc-decimals
FORCE_CONSTANTS_DECIMALS] [--fc-format FC_FORMAT] [--fc-spg-symmetry]
[--fits-debye-model] [--freq-scale FREQUENCY_SCALE_FACTOR] [--full-fc] [--fz
CREATE_FORCE_SETS_ZERO [CREATE_FORCE_SETS_ZERO ...]] [--fmax FMAX] [--fmin FMIN]
[--fpitch FPITCH] [--gc] [--gv] [--gv-delta-q GV_DELTA_Q] [--hdf5]
[--hdf5-compression HDF5_COMPRESSION] [--hiphive] [--irreps IRREPS_QPOINT
[IRREPS_QPOINT ...]] [--include-fc] [--include-fs] [--include-disp]
[--include-all] [--legend] [--legacy-plot] [--lcg] [--loglevel LOGLEVEL] [--mass
MASSES [MASSES ...]] [--magmom MAGMOMS [MAGMOMS ...]] [--mesh-format MESH_FORMAT]
[--modulation MODULATION [MODULATION ...]] [--mp MESH_NUMBERS [MESH_NUMBERS ...]]
[--moment] [--moment-order MOMENT_ORDER] [--nac-method NAC_METHOD]
[--no-fc-symmetry] [--nodiag] [--nomeshsym] [--nonac] [--nosym] [--nowritemesh]
[-p] [--pa PRIMITIVE_AXES [PRIMITIVE_AXES ...]] [--pd PROJECTION_DIRECTION
[PROJECTION_DIRECTION ...]] [--pdos PDOS [PDOS ...]] [--pm] [--pr] [--pt]
[--qpoints QPOINTS [QPOINTS ...]] [--qpoints-format QPOINTS_FORMAT] [--q-direction
NAC_Q_DIRECTION [NAC_Q_DIRECTION ...]] [-q] [--random-seed RANDOM_SEED] [--rd
RANDOM_DISPLACEMENTS] [--readfc] [--readfc-format READFC_FORMAT] [--read-qpoints]
[-s] [--sp] [--show-irreps] [--sigma SIGMA] [--symmetry] [-t] [--td] [--tdm]
[--tdm-cif TEMPERATURE] [--temperature TEMPERATURE] [--tmax TMAX] [--tmin TMIN]
[--tolerance SYMMETRY_TOLERANCE] [--trigonal] [--tstep TSTEP] [-v] [--wien2k-p1]
[--writefc] [--writefc-format WRITEFC_FORMAT] [--writedm] [--xyz-projection]
[filename ...]
Phonopy command-line-tool
positional arguments:
filename
phonopy.yaml like file
options:
-h, --help
show this help message and exit
--abinit
Invoke Abinit mode
--aims Invoke FHI-aims mode
--cp2k Invoke CP2K mode
--crystal
Invoke CRYSTAL mode
--dftb+
Invoke dftb+ mode
--elk Invoke elk mode
--qe Invoke Quantum espresso (QE) mode
--siesta
Invoke Siesta mode
--turbomole
Invoke TURBOMOLE mode
--vasp Invoke Vasp mode
--wien2k
Invoke Wien2k mode
--castep
Invoke CASTEP mode
--fleur
Invoke Fleur mode
--alm Use ALM for generating force constants
--amplitude DISPLACEMENT_DISTANCE
Distance of displacements
--anime ANIME [ANIME ...]
Same as ANIME tag
--band BAND_PATHS [BAND_PATHS ...]
Same behavior as BAND tag
--band-connection
Treat band crossings
--band-const-interval
Band paths are sampled with similar interval.
--band-labels BAND_LABELS [BAND_LABELS ...]
Show labels at band segments
--band-format BAND_FORMAT
Band structure output file-format
--band-points BAND_POINTS
Number of points calculated on a band segment in the band structure mode
--bi BAND_INDICES [BAND_INDICES ...], --band-indices BAND_INDICES [BAND_INDICES ...]
Band indices to be included to calcualte thermal properties
--config FILE
Phonopy configuration file
--cutoff-freq CUTOFF_FREQUENCY, --cutoff-frequency CUTOFF_FREQUENCY
Thermal properties are not calculated below this cutoff frequency.
--cutoff-radius CUTOFF_RADIUS
Out of cutoff radius, force constants are set zero.
--dense-svecs
Pair shortest vectors in supercell are stored in dense format.
--dm-decimals DYNAMICAL_MATRIX_DECIMALS
Decimals of values of decimals
--dos Calculate (P)DOS
--eigvecs, --eigenvectors
Output eigenvectors
--exclude-born, --exclude-nac-params
Exclude born effective charge and dielectric tensor in phonopy.yaml
-f CREATE_FORCE_SETS [CREATE_FORCE_SETS ...], --force-sets CREATE_FORCE_SETS
[CREATE_FORCE_SETS ...]
Create FORCE_SETS
--factor FREQUENCY_CONVERSION_FACTOR
Frequency unit conversion factor
--fc FILE, --force-constants FILE
Create FORCE_CONSTANTS from vaspurn.xml. vasprun.xml has to be passed as argument.
--fc-calc-opt FC_CALCULATOR_OPTIONS, --fc-calculator-options FC_CALCULATOR_OPTIONS
Options for force constants calculator as comma separated string with the style of
key = values
--fc-decimals FORCE_CONSTANTS_DECIMALS
Decimals of values of force constants
--fc-format FC_FORMAT
Force constants input/output file-format
--fc-spg-symmetry
Enforce space group symmetry to force constants
--fits-debye-model
Fits total DOS to a Debye model
--freq-scale FREQUENCY_SCALE_FACTOR
Squared scale factor multiplied as fc2 * factor^2. Therefore frequency is changed
but the contribution from NAC is not changed.
--full-fc
Calculate full supercell force constants matrix
--fz CREATE_FORCE_SETS_ZERO [CREATE_FORCE_SETS_ZERO ...], --force-sets-zero
CREATE_FORCE_SETS_ZERO [CREATE_FORCE_SETS_ZERO ...]
Create FORCE_SETS. disp.yaml in the current directory and vapsrun.xml's for VASP or
case.scf(m) for Wien2k as arguments are required. The first argument is that of the
perfect supercell to subtract residual forces
--fmax FMAX
Maximum frequency used for DOS or moment calculation
--fmin FMIN
Minimum frequency used for DOS or moment calculation
--fpitch FPITCH
Frequency pitch used for DOS or moment calculation
--gc, --gamma-center
Set mesh as Gamma center
--gv, --group-velocity
Calculate group velocities at q-points
--gv-delta-q GV_DELTA_Q
Delta-q distance used for group velocity calculation
--hdf5 Use hdf5 for force constants
--hdf5-compression HDF5_COMPRESSION
hdf5 compression filter (default: gzip)
--hiphive
Use hiPhive for generating force constants
--irreps IRREPS_QPOINT [IRREPS_QPOINT ...], --irreps-qpoint IRREPS_QPOINT [IRREPS_QPOINT
...]
A q-point where characters of irreps are calculated
--include-fc
Include force constants in phonopy.yaml
--include-fs
Include force sets in phonopy.yaml
--include-disp
Include displacements in phonopy.yaml
--include-all
Include all output file data in phonopy.yaml
--legend
Legend of plots is shown in thermal displacements
--legacy-plot
Legacy style band structure pl
--lcg, --little-cogroup
Show irreps of little co-group (or point-group of wave vector q) instead of little
group
--loglevel LOGLEVEL
Log level
--mass MASSES [MASSES ...]
Same as MASS tag
--magmom MAGMOMS [MAGMOMS ...]
Same as MAGMOM tag
--mesh-format MESH_FORMAT
Mesh output file-format
--modulation MODULATION [MODULATION ...]
Same as MODULATION tag
--mp MESH_NUMBERS [MESH_NUMBERS ...], --mesh MESH_NUMBERS [MESH_NUMBERS ...]
Same behavior as MP tag
--moment
Calculate moment of phonon states distribution
--moment-order MOMENT_ORDER
Order of moment of phonon states distribution
--nac-method NAC_METHOD
Non-analytical term correction method: Gonze (default) or Wang
--no-fc-symmetry, --no-sym-fc
Do not symmetrize force constants
--nodiag
Set displacements parallel to axes
--nomeshsym
Symmetry is not imposed for mesh sampling.
--nonac
Non-analytical term correction
--nosym
Symmetry is not imposed.
--nowritemesh
Do not write mesh.yaml or mesh.hdf5
-p, --plot
Plot data
--pa PRIMITIVE_AXES [PRIMITIVE_AXES ...], --primitive-axis PRIMITIVE_AXES [PRIMITIVE_AXES
...], --primitive-axes PRIMITIVE_AXES [PRIMITIVE_AXES ...]
Same as PRIMITIVE_AXES tag
--pd PROJECTION_DIRECTION [PROJECTION_DIRECTION ...], --projection-direction
PROJECTION_DIRECTION [PROJECTION_DIRECTION ...]
Same as PROJECTION_DIRECTION tag
--pdos PDOS [PDOS ...]
Same as PDOS tag
--pm Set plus minus displacements
--pr, --pretend-real
Use imaginary frequency as real for thermal property calculation. For a testing
purpose only, when a small amount of imaginary branches obtained.
--pt, --projected-thermal-property
Output projected thermal properties
--qpoints QPOINTS [QPOINTS ...]
Calculate at specified q-points
--qpoints-format QPOINTS_FORMAT
Q-points output file-format
--q-direction NAC_Q_DIRECTION [NAC_Q_DIRECTION ...]
Direction of q-vector perturbation used for NAC at q->0, and group velocity for
degenerate phonon mode in q-points mode
-q, --quiet
Print out smallest information
--random-seed RANDOM_SEED
Random seed by a 32 bit unsigned integer
--rd RANDOM_DISPLACEMENTS, --random-displacements RANDOM_DISPLACEMENTS
Number of supercells with random displacements
--readfc
Read FORCE_CONSTANTS
--readfc-format READFC_FORMAT
Force constants input file-format
--read-qpoints
Read QPOITNS
-s, --save
Save plot data in pdf
--sp, --save-params
Save parameters that can run phonopy in phonopy_params.yaml.
--show-irreps
Show IR-Reps along with characters
--sigma SIGMA
Smearing width for DOS
--symmetry
Check crystal symmetry
-t, --thermal-property
Output thermal properties
--td, --thermal-displacements
Output thermal displacements
--tdm, --thermal-displacement-matrix
Output thermal displacement matrices
--tdm-cif TEMPERATURE, --thermal-displacement-matrix-cif TEMPERATURE
Write cif with aniso_U for which temperature is specified
--temperature TEMPERATURE
A temperature point
--tmax TMAX
Maximum calculated temperature
--tmin TMIN
Minimum calculated temperature
--tolerance SYMMETRY_TOLERANCE
Symmetry tolerance to search
--trigonal
Set displacements of all trigonal axes
--tstep TSTEP
Calculated temperature step
-v, --verbose
Detailed information is shown.
--wien2k-p1
Assume Wien2k structs with displacements are P1
--writefc
Write FORCE_CONSTANTS
--writefc-format WRITEFC_FORMAT
Force constants output file-format
--writedm
Write dynamical matrices. This has to be used with QPOINTS setting (or --qpoints)
--xyz-projection
Project PDOS x, y, z directions in Cartesian coordinates