Provided by: rsplib-registrar_3.4.1-1_amd64 bug

NAME

     rspregistrar — RSerPool Pool Registrar (PR) Service

SYNOPSIS

     rspregistrar [-announcettl=TTL] [-asap=auto|address:port,address,...]
                  [-asapannounce=auto|address:port] [-autoclosetimeout=seconds]
                  [-endpointkeepalivetransmissioninterval=milliseconds]
                  [-endpointkeepalivetimeoutinterval=milliseconds] [-maxbadpereports=reports]
                  [-maxhresitems=items] [-maxincrement=increment]
                  [-minaddressscope=loopback|sitelocal|global]
                  [-serverannouncecycle=milliseconds] [-enrp=auto|address:port,address,...]
                  [-enrpannounce=auto|address:port] [-maxelementsperhtrequest=items]
                  [-mentordiscoverytimeout=milliseconds] [-peer=address:port]
                  [-peerheartbeatcycle=milliseconds] [-peermaxtimelastheard=millisecond]
                  [-peermaxtimenoresponse=milliseconds] [-takeoverexpiryinterval=milliseconds]
                  [-cspinterval=milliseconds] [-cspserver=address:port] [-logcolor=on|off]
                  [-logappend=filename] [-logfile=filename] [-loglevel=0-9]

DESCRIPTION

     rspregistrar provides a registrar service for Reliable Server Pooling (RSerPool) pool
     elements (PEs) and pool users (PUs). PRs of an operation scope synchronize their view of the
     handlespace using the Endpoint haNdlespace Redundancy Protocol (ENRP), transported via SCTP.
     An operation scope has a limited range, e.g. an organization or only a building. In
     particular, it is restricted to a single administrative domain - in contrast to GRID
     computing - in order to keep the management complexity at a minimum. Nevertheless, PEs may
     be distributed globally for their service to survive localized disasters.

     PEs choose an arbitrary PR of the operation scope to register into a pool by using the
     Aggregate Server Access Protocol (ASAP), again transported via SCTP.  Upon registration at a
     PR, the chosen PR becomes the Home-PR (PR-H) of the newly registered PE. A PR-H is
     responsible for monitoring its PEs' availability by keep-alive messages (to be acknowledged
     by the PE within a given timeout) and propagates the information about its PEs to the other
     PRs of the operation scope via ENRP updates.

     In order to access the service of a pool given by its PH, a PU requests a PE selection from
     an arbitrary PR of the operation scope, using the Aggregate Server Access Protocol (ASAP),
     transported via SCTP. The PR selects the requested list of PE identities by applying a pool-
     specific selection rule, called pool policy.

     In order to allow for automatic configuration, a PR can send out regular announces via an
     ASAP and ENRP multicast address. PEs and PUs can listen to this address to learn the list of
     currently available PRs.

ARGUMENTS

     The following options are available:

     -quiet  Do not print startup and shutdown messages.

     -announcettl=TTL
             Sets the TTL for outgoing ASAP Announce/ENRP Presence messages via multicast.

     Logging Parameters:
             It is recommended to use at least a value of 2 to see possibly important error
             messages and warnings.

             -logcolor=on|off
                     Turns ANSI colorization of the logging output on or off.

             -logappend=filename
                     Write logging output to a file (default is stdout); output will be appended
                     to given file.

             -logfile=filename
                     Write logging output to a file (default is stdout); given file will be
                     overwritten.

             -loglevel=0-9
                     Sets the logging verbosity from 0 (none) to 9 (very verbose).

     Component Status Protocol (CSP) Parameters:

             -cspinterval=milliseconds
                     Sets the interval for the CSP status updates in milliseconds.

             -cspserver=address:port
                     Sets the CSP monitor server's address and port.

     Aggregate Server Access Protocol (ASAP) Parameters:

             -autoclosetimeout=seconds
                     Sets the SCTP autoclose timeout for idle ASAP associations.

             -asap=auto|address:port,address,...
                     Sets the ASAP endpoint address(es). Use "auto" to automatically set it
                     (default).

             -asapannounce=auto|address:port
                     Sets the multicast address and UDP port to send the ASAP Announces to. Use
                     "auto" to automatically set it (default). Examples:
                     -asapannounce=auto
                     -asapannounce=239.0.0.1:3863

             -endpointkeepalivetransmissioninterval=milliseconds
                     Sets the ASAP Endpoint Keep Alive interval.

             -endpointkeepalivetimeoutinterval=milliseconds
                     Sets the ASAP Endpoint Keep Alive timeout.

             -maxbadpereports=reports
                     Sets the maximum number of ASAP Endpoint Unreachable reports before removing
                     a PE.

             -maxincrement=increment
                     Sets the MaxIncrement constant. Handle with care!

             -maxhresitems=items
                     Sets the MaxHResItems constant.

             -minaddressscope=loopback|sitelocal|global
                     Sets the minimum address scope acceptable for registered PEs:
                     loopback: Loopback address (only valid on the same node!)
                     site-local: Site-local addresses (e.g. 192.168.1.1, etc.)
                     global: Global addresses

             -serverannouncecycle=milliseconds
                     Sets the ASAP Announce interval.

     Endpoint Handlespace Redundancy Protocol (ENRP) Parameters:

             -enrp=auto|address:port,address,...
                     Sets the ENRP endpoint address(es). Use "auto" to automatically set it
                     (default). Examples:
                     -enrp=auto
                     -enrp=1.2.3.4:9901
                     -enrp=1.2.3.4:9901,[2000::1:2:3],9.8.7.6

             -enrpannounce=auto|address:port
                     Sets the multicast address and UDP port to send the ENRP Announces to. Use
                     "auto" to automatically set it (default). Examples:
                     -enrpannounce=auto
                     -enrpannounce=239.0.0.1:9901

             -maxelementsperhtrequest=items
                     Sets the maximum number of items per ENRP Handle Table Response.

             -mentordiscoverytimeout=milliseconds
                     Sets the mentor PR discovery timeout in milliseconds.

             -peer=address:port
                     Adds a static PR entry into the Peer List. It is possible to add multiple
                     entries.

             -peerheartbeatcycle=milliseconds
                     Sets the ENRP peer heartbeat interval.

             -peermaxtimelastheard=milliseconds
                     Sets the ENRP peer max time last heard.

             -peermaxtimenoresponse=milliseconds
                     Sets the ENRP maximum time without response.

             -takeoverexpiryinterval=milliseconds
                     Sets the ENRP takeover timeout.

ENVIRONMENT

     rspregistrar uses the environment variables CSP_SERVER and CSP_INTERVAL to define a CSP
     server to send reports to in the specified interval.

DIAGNOSTICS

     If loglevel>0, log messages will be printed to stdout or into a specified log file.

SEE ALSO

     For a detailed introduction to RSerPool, see:
     https://duepublico.uni-duisburg-
     essen.de/servlets/DerivateServlet/Derivate-16326/Dre2006_final.pdf

     Thomas Dreibholz's RSerPool Page:
     https://www.uni-due.de/~be0001/rserpool/