Provided by: systemd_251.4-1ubuntu7_amd64 bug

NAME

       systemd-inhibit - Execute a program with an inhibition lock taken

SYNOPSIS

       systemd-inhibit [OPTIONS...] [COMMAND] [ARGUMENTS...]

       systemd-inhibit [OPTIONS...] --list

DESCRIPTION

       systemd-inhibit may be used to execute a program with a shutdown, sleep, or idle inhibitor
       lock taken. The lock will be acquired before the specified command line is executed and
       released afterwards.

       Inhibitor locks may be used to block or delay system sleep and shutdown requests from the
       user, as well as automatic idle handling of the OS. This is useful to avoid system
       suspends while an optical disc is being recorded, or similar operations that should not be
       interrupted.

       For more information see the Inhibitor Lock Developer Documentation[1].

OPTIONS

       The following options are understood:

       --what=
           Takes a colon-separated list of one or more operations to inhibit: "shutdown",
           "sleep", "idle", "handle-power-key", "handle-suspend-key", "handle-hibernate-key",
           "handle-lid-switch", for inhibiting reboot/power-off/halt/kexec,
           suspending/hibernating, the automatic idle detection, or the low-level handling of the
           power/sleep key and the lid switch, respectively. If omitted, defaults to
           "idle:sleep:shutdown".

       --who=
           Takes a short, human-readable descriptive string for the program taking the lock. If
           not passed, defaults to the command line string.

       --why=
           Takes a short, human-readable descriptive string for the reason for taking the lock.
           Defaults to "Unknown reason".

       --mode=
           Takes either "block" or "delay" and describes how the lock is applied. If "block" is
           used (the default), the lock prohibits any of the requested operations without time
           limit, and only privileged users may override it. If "delay" is used, the lock can
           only delay the requested operations for a limited time. If the time elapses, the lock
           is ignored and the operation executed. The time limit may be specified in
           logind.conf(5). Note that "delay" is only available for "sleep" and "shutdown".

       --list
           Lists all active inhibition locks instead of acquiring one.

       --no-pager
           Do not pipe output into a pager.

       --no-legend
           Do not print the legend, i.e. column headers and the footer with hints.

       -h, --help
           Print a short help text and exit.

       --version
           Print a short version string and exit.

EXIT STATUS

       Returns the exit status of the executed program.

EXAMPLE

           # systemd-inhibit wodim foobar.iso

       This burns the ISO image foobar.iso on a CD using wodim(1), and inhibits system sleeping,
       shutdown and idle while doing so.

ENVIRONMENT

       $SYSTEMD_LOG_LEVEL
           The maximum log level of emitted messages (messages with a higher log level, i.e. less
           important ones, will be suppressed). Either one of (in order of decreasing importance)
           emerg, alert, crit, err, warning, notice, info, debug, or an integer in the range
           0...7. See syslog(3) for more information.

       $SYSTEMD_LOG_COLOR
           A boolean. If true, messages written to the tty will be colored according to priority.

           This setting is only useful when messages are written directly to the terminal,
           because journalctl(1) and other tools that display logs will color messages based on
           the log level on their own.

       $SYSTEMD_LOG_TIME
           A boolean. If true, console log messages will be prefixed with a timestamp.

           This setting is only useful when messages are written directly to the terminal or a
           file, because journalctl(1) and other tools that display logs will attach timestamps
           based on the entry metadata on their own.

       $SYSTEMD_LOG_LOCATION
           A boolean. If true, messages will be prefixed with a filename and line number in the
           source code where the message originates.

           Note that the log location is often attached as metadata to journal entries anyway.
           Including it directly in the message text can nevertheless be convenient when
           debugging programs.

       $SYSTEMD_LOG_TID
           A boolean. If true, messages will be prefixed with the current numerical thread ID
           (TID).

           Note that the this information is attached as metadata to journal entries anyway.
           Including it directly in the message text can nevertheless be convenient when
           debugging programs.

       $SYSTEMD_LOG_TARGET
           The destination for log messages. One of console (log to the attached tty),
           console-prefixed (log to the attached tty but with prefixes encoding the log level and
           "facility", see syslog(3), kmsg (log to the kernel circular log buffer), journal (log
           to the journal), journal-or-kmsg (log to the journal if available, and to kmsg
           otherwise), auto (determine the appropriate log target automatically, the default),
           null (disable log output).

       $SYSTEMD_PAGER
           Pager to use when --no-pager is not given; overrides $PAGER. If neither $SYSTEMD_PAGER
           nor $PAGER are set, a set of well-known pager implementations are tried in turn,
           including less(1) and more(1), until one is found. If no pager implementation is
           discovered no pager is invoked. Setting this environment variable to an empty string
           or the value "cat" is equivalent to passing --no-pager.

           Note: if $SYSTEMD_PAGERSECURE is not set, $SYSTEMD_PAGER (as well as $PAGER) will be
           silently ignored.

       $SYSTEMD_LESS
           Override the options passed to less (by default "FRSXMK").

           Users might want to change two options in particular:

           K
               This option instructs the pager to exit immediately when Ctrl+C is pressed. To
               allow less to handle Ctrl+C itself to switch back to the pager command prompt,
               unset this option.

               If the value of $SYSTEMD_LESS does not include "K", and the pager that is invoked
               is less, Ctrl+C will be ignored by the executable, and needs to be handled by the
               pager.

           X
               This option instructs the pager to not send termcap initialization and
               deinitialization strings to the terminal. It is set by default to allow command
               output to remain visible in the terminal even after the pager exits. Nevertheless,
               this prevents some pager functionality from working, in particular paged output
               cannot be scrolled with the mouse.

           See less(1) for more discussion.

       $SYSTEMD_LESSCHARSET
           Override the charset passed to less (by default "utf-8", if the invoking terminal is
           determined to be UTF-8 compatible).

       $SYSTEMD_PAGERSECURE
           Takes a boolean argument. When true, the "secure" mode of the pager is enabled; if
           false, disabled. If $SYSTEMD_PAGERSECURE is not set at all, secure mode is enabled if
           the effective UID is not the same as the owner of the login session, see geteuid(2)
           and sd_pid_get_owner_uid(3). In secure mode, LESSSECURE=1 will be set when invoking
           the pager, and the pager shall disable commands that open or create new files or start
           new subprocesses. When $SYSTEMD_PAGERSECURE is not set at all, pagers which are not
           known to implement secure mode will not be used. (Currently only less(1) implements
           secure mode.)

           Note: when commands are invoked with elevated privileges, for example under sudo(8) or
           pkexec(1), care must be taken to ensure that unintended interactive features are not
           enabled. "Secure" mode for the pager may be enabled automatically as describe above.
           Setting SYSTEMD_PAGERSECURE=0 or not removing it from the inherited environment allows
           the user to invoke arbitrary commands. Note that if the $SYSTEMD_PAGER or $PAGER
           variables are to be honoured, $SYSTEMD_PAGERSECURE must be set too. It might be
           reasonable to completely disable the pager using --no-pager instead.

       $SYSTEMD_COLORS
           Takes a boolean argument. When true, systemd and related utilities will use colors in
           their output, otherwise the output will be monochrome. Additionally, the variable can
           take one of the following special values: "16", "256" to restrict the use of colors to
           the base 16 or 256 ANSI colors, respectively. This can be specified to override the
           automatic decision based on $TERM and what the console is connected to.

       $SYSTEMD_URLIFY
           The value must be a boolean. Controls whether clickable links should be generated in
           the output for terminal emulators supporting this. This can be specified to override
           the decision that systemd makes based on $TERM and other conditions.

SEE ALSO

       systemd(1), logind.conf(5)

NOTES

        1. Inhibitor Lock Developer Documentation
           https://www.freedesktop.org/wiki/Software/systemd/inhibit