Provided by: yubikey-personalization_1.20.0-3_amd64 bug

NAME

       ykpersonalize - personalize YubiKey OTP tokens

SYNOPSIS

       ykpersonalize [-Nkey] [-1 | -2] [-sfile] [-ifile] [-fformat] [-axxx] [-cxxx] [-ooption]
       [-y] [-v] [-d] [-h] [-n] [-t] [-u] [-x] [-z] [-m] [-S] [-V] [-Dxxx_]

DESCRIPTION

       Set the AES key, user ID and other settings in a YubiKey. For the complete explanation of
       the meaning of all parameters, see the reference manual: YubiKey manual
       (https://www.yubico.com/wp-content/uploads/2015/03/YubiKeyManual_v3.4.pdf)

OPTIONS

       -Nkey
           use the nth YubiKey found.

       -1
           change the first configuration. This is the default and is normally used for true OTP
           generation. In this configuration, the option flag -oappend-cr is set by default.

       -2
           change the second configuration. This is for YubiKey II only and is then normally used
           for static key generation. In this configuration, the option flags -oappend-cr,
           -ostatic-ticket, -ostrong-pw1, -ostrong-pw2 and -oman-update are set by default.

       -z
           delete configuration in selected slot.

       -sfile
           save configuration to file instead of key (if file is -, send to stdout).

       -ifile
           read configuration from file (if file is -, read from stdin). Configuration import is
           only valid for the ycfg format.

       -fformat
           format to be used with -s and -i. Valid options are ycfg and legacy.

       -a[xxx]
           the AES secret key as a 32 (or 40 for OATH-HOTP/HMAC CHAL-RESP) char hex value (not
           modhex) (none to prompt for key on stdin). If -a is not used a random key will be
           generated.

       -c[xxx]
           a 12 char hex value (not modhex) to use as the access code for programming. NOTE: this
           does NOT SET the access code. That is done with -oaccess=. If no argument is provided
           the code is prompted for on stdin.

       -ooption
           change configuration option. Possible option arguments are:

           fixed=fffffffffff
               The modhex public identity of the YubiKey, 0-32 characters long (encoding up to 16
               bytes). It’s possible to give the identity in hex as well, just prepend the value
               with ’h:’. The fixed part is emitted before the OTP when the button on the YubiKey
               is pressed. It can be used as an identifier for the user, for example.

           uid[=uuuuuu]
               The uid part of the generated OTP, also called private identity, in hex. Must be
               12 characters long. The uid is 6 bytes of static data that is included (encrypted)
               in every OTP, and is used to validate that an OTP was in fact encrypted with the
               AES key shared between the YubiKey and the validation service. It cannot be used
               to identify the YubiKey as it is only readable to those that know the AES key. If
               no argument is provided the uid is prompted for on stdin.

           access[=fffffffffff]
               New hex access code to set. Must be 12 characters long. If an access code is set,
               it will be required for subsequent reprogramming of the YubiKey. If no argument is
               provided code is prompted for on stdin.

           oath-imf=xxx
               Set OATH Initial Moving Factor. This is the initial counter value for the YubiKey.
               This should be a value between 0 and 1048560, evenly dividable by 16.

           ticket-flag
               Set/clear ticket flag, see the section Ticket Flags.

           configuration-flag
               Set/clear configuration flag, see the section Configuration flags.

       -y
           always commit without prompting.

       -d
           dry-run, run without writing a YubiKey.

       -v
           be more verbose.

       -h
           display help.

       -V
           display version.

   YubiKey Neo only
       -n URI
           program NFC NDEF URI.

       -t text
           program NFC NDEF text.

   YubiKey 3 and 4 only
       -m mode
           set device configuration for the YubiKey. It is parsed in the form
           mode:cr_timeout:autoeject_timeout where mode is:

           0
               OTP device only.

           1
               CCID device only.

           2
               OTP/CCID composite device.

           3
               U2F device only.

           4
               OTP/U2F composite device.

           5
               U2F/CCID composite device.

           6
               OTP/U2F/CCID composite device. Add 80 to set MODE_FLAG_EJECT, for example: 81

               cr_timeout is the timeout in seconds for the YubiKey to wait on button press for
               challenge response (default is 15)

               autoeject_timeout is the timeout in seconds before the card is automatically
               ejected in mode 81

       Removing OTP mode also disables communication between ykpersonalize and the YubiKey.
       Further mode changes will have to be done with ykneomgr (for CCID mode) or u2f-host (for
       U2F mode).

   YubiKey 3 and above
       -S0605...
           set the scanmap to be used with the YubiKey. It must be 45 unique bytes as 90
           characters. Leave argument empty to reset to the YubiKey’s default. The scanmap must
           be sent in the order:

               cbdefghijklnrtuvCBDEFGHIJKLNRTUV0123456789!\t\r

           The default scanmap in the YubiKey is:

               06050708090a0b0c0d0e0f111517181986858788898a8b8c8d8e8f9195979899271e1f202122232425269e2b28

           An example for simplified U.S. Dvorak would be:

               0c110b071c180d0a0619130f120e09378c918b879c988d8a8699938f928e89b7271e1f202122232425269e2b28

           Or for a French azerty keyboard (digits are shifted):

               06050708090a0b0c0d0e0f111517181986858788898a8b8c8d8e8f9195979899a79e9fa0a1a2a3a4a5a6382b28

           Or for a French BÉPO keyboard (French Dvorak):

               0b140c0938363707130512330f0d16188b948c89b8b6b787938592b38f8d9698a79e9fa0a1a2a3a4a5a69c2b28

           And a Turkish example (has a dotless i instead of usual i):

               06050708090a0b340d0e0f111517181986858788898a8b8c8d8e8f9195979899271e1f202122232425269e2b28

           Note that you must remove any whitespace present in these examples before using the
           values.

   YubiKey 5 and above
       -D0403...
           Set the deviceinfo to use with this YubiKey.

   YubiKey 2.3 and above
       -u
           Update existing configuration, rather than overwriting. Only possible if the slot is
           configured as updatable.

       -x
           Swap configuration slot 1 and 2 inside the YubiKey. Only possible if both slots are
           configured as updatable.

TICKET FLAGS

       tab-first
           Send a tab character as the first character. This is usually used to move to the next
           input field.

       append-tab1
           Send a tab character between the fixed part and the one-time password part. This is
           useful if you have the fixed portion equal to the user name and two input fields that
           you navigate between using tab.

       append-tab2
           Send a tab character as the last character.

       append-delay1
           Add a half-second delay before sending the one-time password part. This option is only
           valid for firmware 1.x and 2.x.

       append-delay2
           Add a half-second delay after sending the one-time password part. This option is only
           valid for firmware 1.x and 2.x.

       append-cr
           Add a carriage return after sending the one-time password part.

   YubiKey 2.0 firmware and above
       protect-cfg2
           When written to configuration 1, block later updates to configuration 2. When written
           to configuration 2, prevent configuration 1 from having the lock bit set.

   YubiKey 2.1 firmware and above
       oath-hotp
           Set OATH-HOTP mode rather than YubiKey mode. In this mode, the token functions
           according to the OATH-HOTP standard.

   YubiKey 2.2 firmware and above
       chal-resp
           Set challenge-response mode.

CONFIGURATION FLAGS

       send-ref
           Send a reference string of all 16 modhex characters before the fixed part. When
           combined with -ostrong-pw2 this sends a !  before the rest of the string.

       pacing-10ms
           Add a 10ms delay between key presses.

       pacing-20ms
           Add a 20ms delay between key presses.

       static-ticket
           Output a fixed string rather than a one-time password. The password is still based on
           the AES key and should be hard to guess and impossible to remember.

   YubiKey 1.x firmware only
       ticket-first
           Send the one-time password rather than the fixed part first.

       allow-hidtrig
           Allow trigger through HID/keyboard by pressing caps-, num or scroll-lock twice. Not
           recommended for security reasons.

   YubiKey 2.0 firmware and above
       short-ticket
           Limit the length of the static string to max 16 digits. This flag only makes sense
           with the -ostatic-ticket option. When -oshort-ticket is used without -ostatic-ticket
           it will program the YubiKey in "scan-code mode", in this mode the key sends the
           contents of fixed, uid and key as raw keyboard scancodes. For example, by using the
           fixed string h:8b080f0f122c9a12150f079e in this mode it will send Hello World!  on a
           qwerty keyboard. This mode sends raw scan codes, so output will differ between
           keyboard layouts.

       strong-pw1
           Upper-case the two first letters of the output string. This is for compatibility with
           legacy systems that enforce both uppercase and lowercase characters in a password and
           does not add any security.

       strong-pw2
           Replace the first eight characters of the modhex alphabet with the numbers 0 to 7.
           Like -ostrong-pw1, this is intended to support legacy systems.

       man-update
           Enable user-initiated update of the static password. Only makes sense with the
           -ostatic-ticket option. This is only valid for firmware 2.x.

   YubiKey 2.1 firmware and above
       oath-hotp8
           Generate an 8-digit HOTP rather than a 6-digit one.

       oath-fixed-modhex1
           Send the first byte of the fixed part as modhex.

       oath-fixed-modhex2
           Send the first two bytes of the fixed part as modhex.

       oath-fixed-modhex
           Send the fixed part is as modhex.

       oath-id=m:OOTTUUUUUUUU
           Configure OATH token id with a provided value. See description of this option under
           the 2.2 section for details, but note that a YubiKey 2.1 key can’t report its serial
           number and thus a token identifier value must be specified.

   YubiKey 2.2 firmware and above
       chal-yubico
           Yubico OTP challenge-response mode.

       chal-hmac
           Generate HMAC-SHA1 challenge responses.

       hmac-lt64
           Calculate HMAC on less than 64 bytes input. Whatever is in the last byte of the
           challenge is used as end of input marker (backtracking from end of payload).

       chal-btn-trig
           The YubiKey will wait for the user to press the key (within 15 seconds) before
           answering the challenge.

       serial-btn-visible
           The YubiKey will emit its serial number if the button is pressed during power-up. This
           option is only valid for the 2.x firmware line.

       serial-usb-visible
           The YubiKey will indicate its serial number in the USB iSerial field. This option is
           not available in the 3.0 and 3.1 firmwares.

       serial-api-visible
           The YubiKey will allow its serial number to be read using an API call.

       oath-id[=m:OOTTUUUUUUUU]
           Configure OATH token id with a provided value, or if used without a value use the
           standard YubiKey token identifier.

       The standard OATH token id for a Yubico YubiKey is (modhex) OO=ub, TT=he, (decimal)
       UUUUUUUU=serial number.

       The reason for the decimal serial number is to make it easy for humans to correlate the
       serial number on the back of the YubiKey to an entry in a list of associated tokens for
       example. Other encodings can be accomplished using the appropriate oath-fixed-modhex
       options.

       Note that the YubiKey must be programmed to allow reading its serial number, otherwise
       automatic token id creation is not possible.

       See section "5.3.4 - OATH-HOTP Token Identifier" of the YubiKey manual
       http://yubico.com/files/YubiKey_manual-2.0.pdf for further details.

   YubiKey 2.3 firmware and above
       use-numeric-keypad
           Send scancodes for numeric keypad keypresses when sending digits - helps with some
           keyboard layouts. This option is only valid for the 2.x firmware line.

       fast-trig
           Faster triggering when only configuration 1 is available. This option is always in
           effect on firmware versions 3.0 and above.

       allow-update
           Allow updating (or swapping) of certain parameters in a configuration at a later time.

       dormant
           Hides/unhides a configuration stored in a YubiKey.

   YubiKey 2.4/3.1 firmware and above
       led-inv
           Inverts the behaviour of the led on the YubiKey.

   OATH-HOTP Mode
       When using OATH-HOTP mode, a HMAC key of 160 bits (20 bytes, 40 chars of hex) can be
       supplied with -a.

   Challenge-response Mode
       In CHAL-RESP mode, the token will NOT generate any keypresses when the button is pressed
       (although it is perfectly possible to have one slot with a keypress-generating
       configuration, and the other in challenge-response mode). Instead, a program capable of
       sending USB HID feature reports to the token must be used to send it a challenge, and read
       the response.

   Modhex
       Modhex is a way of writing hex digits where the “digits” are chosen for being in the same
       place on most keyboard layouts. To convert from hex to modhex, you can use:

           tr "[0123456789abcdef]" "[cbdefghijklnrtuv]"

       To convert the other way, use:

           tr "[cbdefghijklnrtuv]" "[0123456789abcdef]"

   EXAMPLES
       Programming for YubiCloud:

           ouid=`dd if=/dev/urandom 2>/dev/null | tr -d '[:upper:]' | tr -cd '[:xdigit:]' | fold -w12 | head -1`
           ofixed=ff`dd if=/dev/urandom 2>/dev/null | tr -d '[:upper:]' | tr -cd '[:xdigit:]' | fold -w10 | head -1`
           ykpersonalize -1 -ouid=h:$ouid -ofixed=h:$ofixed

       This will program a key with a random 6 byte uid and a 12 character fixed string starting
       with vv. This is suitable for upload to YubiCloud at https://upload.yubico.com/

   BUGS
       Report ykpersonalize bugs in the issue tracker
       https://github.com/Yubico/yubikey-personalization/issues

   SEE ALSO
       The ykpersonalize home page https://developers.yubico.com/yubikey-personalization/

       YubiKeys can be obtained from Yubico http://www.yubico.com/