Provided by: libb-utils-perl_0.27-2_amd64 bug

NAME

       B::Utils - Helper functions for op tree manipulation

VERSION

       version 0.27

INSTALLATION

       To install this module, run the following commands:

           perl Makefile.PL
           make
           make test
           make install

SYNOPSIS

         use B::Utils;

OP METHODS

       "$op->oldname"
           Returns the name of the op, even if it is currently optimized to null.  This helps you
           understand the structure of the op tree.

       "$op->kids"
           Returns an array of all this op's non-null children, in order.

       "$op->parent"
           Returns the parent node in the op tree, if possible. Currently "possible" means "if
           the tree has already been optimized"; that is, if we're during a "CHECK" block. (and
           hence, if we have valid "next" pointers.)

           In the future, it may be possible to search for the parent before we have the "next"
           pointers in place, but it'll take me a while to figure out how to do that.

           Warning: Since 5.21.2 B comes with its own version of B::OP::parent which returns
           either B::NULL or the real parent when ccflags contains -DPERL_OP_PARENT.  In this
           case rather use $op->_parent.

       "$op->ancestors"
           Returns all parents of this node, recursively. The list is ordered from younger/closer
           parents to older/farther parents.

       "$op->descendants"
           Returns all children of this node, recursively. The list is unordered.

       "$op->siblings"
           Returns all younger siblings of this node. The list is ordered from younger/closer
           siblings to older/farther siblings.

       "$op->previous"
           Like " $op->next ", but not quite.

       "$op->stringify"
           Returns a nice stringification of an opcode.

       "$op->as_opgrep_pattern(%options)"
           From the op tree it is called on, "as_opgrep_pattern()" generates a data structure
           suitable for use as a condition pattern for the "opgrep()" function described below in
           detail.  Beware: When using such generated patterns, there may be false positives: The
           pattern will most likely not match only the op tree it was generated from since by
           default, not all properties of the op are reproduced.

           You can control which properties of the op to include in the pattern by passing named
           arguments. The default behaviour is as if you passed in the following options:

             my $pattern = $op->as_opgrep_pattern(
               attributes          => [qw(name flags)],
               max_recursion_depth => undef,
             );

           So obviously, you can set "max_recursion_depth" to a number to limit the maximum depth
           of recursion into the op tree. Setting it to 0 will limit the dump to the current op.

           "attributes" is a list of attributes to include in the produced pattern. The
           attributes that can be checked against in this way are:

             name targ type seq flags private pmflags pmpermflags.

EXPORTABLE FUNCTIONS

       "all_starts"
       "all_roots"
           Returns a hash of all of the starting ops or root ops of optrees, keyed to subroutine
           name; the optree for main program is simply keyed to "__MAIN__".

           Note: Certain "dangerous" stashes are not scanned for subroutines: the list of such
           stashes can be found in @B::Utils::bad_stashes. Feel free to examine and/or modify
           this to suit your needs. The intention is that a simple program which uses no modules
           other than "B" and "B::Utils" would show no addition symbols.

           This does not return the details of ops in anonymous subroutines compiled at compile
           time. For instance, given

               $a = sub { ... };

           the subroutine will not appear in the hash. This is just as well, since they're
           anonymous... If you want to get at them, use...

       "anon_subs"
           This returns an array of hash references. Each element has the keys "start" and
           "root". These are the starting and root ops of all of the anonymous subroutines in the
           program.

       "recalc_sub_cache"
           If PL_sub_generation has changed or you have some other reason to want to force the
           re-examination of the optrees, everywhere, call this function.

       "walkoptree_simple($op, \&callback, [$data])"
           The "B" module provides various functions to walk the op tree, but they're all rather
           difficult to use, requiring you to inject methods into the "B::OP" class. This is a
           very simple op tree walker with more expected semantics.

           All the "walk" functions set $B::Utils::file, $B::Utils::line, and $B::Utils::sub to
           the appropriate values of file, line number, and sub name in the program being
           examined.

       "walkoptree_filtered($op, \&filter, \&callback, [$data])"
           This is much the same as "walkoptree_simple", but will only call the callback if the
           "filter" returns true. The "filter" is passed the op in question as a parameter; the
           "opgrep" function is fantastic for building your own filters.

       "walkallops_simple(\&callback, [$data])"
           This combines "walkoptree_simple" with "all_roots" and "anon_subs" to examine every op
           in the program. $B::Utils::sub is set to the subroutine name if you're in a
           subroutine, "__MAIN__" if you're in the main program and "__ANON__" if you're in an
           anonymous subroutine.

       "walkallops_filtered(\&filter, \&callback, [$data])"
           Same as above, but filtered.

       "opgrep(\%conditions, @ops)"
           Returns the ops which meet the given conditions. The conditions should be specified
           like this:

               @barewords = opgrep(
                                   { name => "const", private => OPpCONST_BARE },
                                   @ops
                                  );

           where the first argument to "opgrep()" is the condition to be matched against the op
           structure. We'll henceforth refer to it as an op-pattern.

           You can specify alternation by giving an arrayref of values:

               @svs = opgrep ( { name => ["padsv", "gvsv"] }, @ops)

           And you can specify inversion by making the first element of the arrayref a "!".
           (Hint: if you want to say "anything", say "not nothing": "["!"]")

           You may also specify the conditions to be matched in nearby ops as nested patterns.

               walkallops_filtered(
                   sub { opgrep( {name => "exec",
                                  next => {
                                            name    => "nextstate",
                                            sibling => { name => [qw(! exit warn die)] }
                                          }
                                 }, @_)},
                   sub {
                         carp("Statement unlikely to be reached");
                         carp("\t(Maybe you meant system() when you said exec()?)\n");
                   }
               )

           Get that?

           Here are the things that can be tested in this way:

                   name targ type seq flags private pmflags pmpermflags
                   first other last sibling next pmreplroot pmreplstart pmnext

           Additionally, you can use the "kids" keyword with an array reference to match the
           result of a call to "$op->kids()". An example use is given in the documentation for
           "op_or" below.

           For debugging, you can have many properties of an op that is currently being matched
           against a given condition dumped to STDERR by specifying "dump =" 1> in the
           condition's hash reference.

           If you match a complex condition against an op tree, you may want to extract a
           specific piece of information from the tree if the condition matches.  This normally
           entails manually walking the tree a second time down to the op you wish to extract,
           investigate or modify. Since this is tedious duplication of code and information, you
           can specify a special property in the pattern of the op you wish to extract to capture
           the sub-op of interest. Example:

             my ($result) = opgrep(
               { name => "exec",
                 next => { name    => "nextstate",
                           sibling => { name => [qw(! exit warn die)]
                                        capture => "notreached",
                                      },
                         }
               },
               $root_op
             );

             if ($result) {
               my $name = $result->{notreached}->name; # result is *not* the root op
               carp("Statement unlikely to be reached (op name: $name)");
               carp("\t(Maybe you meant system() when you said exec()?)\n");
             }

           While the above is a terribly contrived example, consider the win for a deeply nested
           pattern or worse yet, a pattern with many disjunctions.  If a "capture" property is
           found anywhere in the op pattern, "opgrep()" returns an unblessed hash reference on
           success instead of the tested op. You can tell them apart using Scalar::Util's
           "blessed()". That hash reference contains all captured ops plus the tested root up as
           the hash entry "$result->{op}". Note that you cannot use this feature with
           "walkoptree_filtered" since that function was specifically documented to pass the
           tested op itself to the callback.

           You cannot capture disjunctions, but that doesn't really make sense anyway.

       "opgrep( \@conditions, @ops )"
           Same as above, except that you don't have to chain the conditions yourself.  If you
           pass an array-ref, opgrep will chain the conditions for you using "next".  The
           conditions can either be strings (taken as op-names), or hash-refs, with the same
           testable conditions as given above.

       "op_or( @conditions )"
           Unlike the chaining of conditions done by "opgrep" itself if there are multiple
           conditions, this function creates a disjunction ("$cond1 || $cond2 || ...") of the
           conditions and returns a structure (hash reference) that can be passed to opgrep as a
           single condition.

           Example:

             my $sub_structure = {
               name => 'helem',
               first => { name => 'rv2hv', },
               'last' => { name => 'const', },
             };

             my @ops = opgrep( {
                 name => 'leavesub',
                 first => {
                   name => 'lineseq',
                   kids => [,
                     { name => 'nextstate', },
                     op_or(
                       {
                         name => 'return',
                         first => { name => 'pushmark' },
                         last => $sub_structure,
                       },
                       $sub_structure,
                     ),
                   ],
                 },
             }, $op_obj );

           This example matches the code in a typical simplest-possible accessor method (albeit
           not down to the last bit):

             sub get_foo { $_[0]->{foo} }

           But by adding an alternation we can also match optional op layers. In this case, we
           optionally match a return statement, so the following implementation is also
           recognized:

             sub get_foo { return $_[0]->{foo} }

           Essentially, this is syntactic sugar for the following structure recognized by
           "opgrep()":

             { disjunction => [@conditions] }

       "carp(@args)"
       "croak(@args)"
           Warn and die, respectively, from the perspective of the position of the op in the
           program. Sounds complicated, but it's exactly the kind of error reporting you expect
           when you're grovelling through an op tree.

   EXPORT
       None by default.

   XS EXPORT
       This modules uses ExtUtils::Depends to export some useful functions for XS modules to use.
       To use those, include in your Makefile.PL:

         my $pkg = ExtUtils::Depends->new("Your::XSModule", "B::Utils");
         WriteMakefile(
           ... # your normal makefile flags
           $pkg->get_makefile_vars,
         );

       Your XS module can now include BUtils.h and BUtils_op.h.  To see document for the
       functions provided, use:

         perldoc -m B::Utils::Install::BUtils.h
         perldoc -m B::Utils::Install::BUtils_op.h

AUTHOR

       Originally written by Simon Cozens, "simon@cpan.org" Maintained by Joshua ben Jore,
       "jjore@cpan.org"

       Contributions from Mattia Barbon, Jim Cromie, Steffen Mueller, and Chia-liang Kao,
       Alexandr Ciornii, Reini Urban.

LICENSE

       This module is free software; you can redistribute it and/or modify it under the same
       terms as Perl itself.

SEE ALSO

       B, B::Generate.