Provided by: ocaml-man_4.13.1-3ubuntu1_all 
NAME
Bigarray.Genarray - no description
Module
Module Bigarray.Genarray
Documentation
Module Genarray
: sig end
type ('a, 'b, 'c) t
The type Genarray.t is the type of Bigarrays with variable numbers of dimensions. Any
number of dimensions between 0 and 16 is supported.
The three type parameters to Genarray.t identify the array element kind and layout, as
follows:
-the first parameter, 'a , is the OCaml type for accessing array elements ( float , int ,
int32 , int64 , nativeint );
-the second parameter, 'b , is the actual kind of array elements ( float32_elt ,
float64_elt , int8_signed_elt , int8_unsigned_elt , etc);
-the third parameter, 'c , identifies the array layout ( c_layout or fortran_layout ).
For instance, (float, float32_elt, fortran_layout) Genarray.t is the type of generic
Bigarrays containing 32-bit floats in Fortran layout; reads and writes in this array use
the OCaml type float .
val create : ('a, 'b) Bigarray.kind -> 'c Bigarray.layout -> int array -> ('a, 'b, 'c) t
Genarray.create kind layout dimensions returns a new Bigarray whose element kind is
determined by the parameter kind (one of float32 , float64 , int8_signed , etc) and whose
layout is determined by the parameter layout (one of c_layout or fortran_layout ). The
dimensions parameter is an array of integers that indicate the size of the Bigarray in
each dimension. The length of dimensions determines the number of dimensions of the
Bigarray.
For instance, Genarray.create int32 c_layout [|4;6;8|] returns a fresh Bigarray of 32-bit
integers, in C layout, having three dimensions, the three dimensions being 4, 6 and 8
respectively.
Bigarrays returned by Genarray.create are not initialized: the initial values of array
elements is unspecified.
Genarray.create raises Invalid_argument if the number of dimensions is not in the range 0
to 16 inclusive, or if one of the dimensions is negative.
val init : ('a, 'b) Bigarray.kind -> 'c Bigarray.layout -> int array -> (int array -> 'a)
-> ('a, 'b, 'c) t
Genarray.init kind layout dimensions f returns a new Bigarray b whose element kind is
determined by the parameter kind (one of float32 , float64 , int8_signed , etc) and whose
layout is determined by the parameter layout (one of c_layout or fortran_layout ). The
dimensions parameter is an array of integers that indicate the size of the Bigarray in
each dimension. The length of dimensions determines the number of dimensions of the
Bigarray.
Each element Genarray.get b i is initialized to the result of f i . In other words,
Genarray.init kind layout dimensions f tabulates the results of f applied to the indices
of a new Bigarray whose layout is described by kind , layout and dimensions . The index
array i may be shared and mutated between calls to f.
For instance, Genarray.init int c_layout [|2; 1; 3|]
(Array.fold_left (+) 0) returns a fresh Bigarray of integers, in C layout, having
three dimensions (2, 1, 3, respectively), with the element values 0, 1, 2, 1, 2, 3.
Genarray.init raises Invalid_argument if the number of dimensions is not in the range 0 to
16 inclusive, or if one of the dimensions is negative.
Since 4.12.0
val num_dims : ('a, 'b, 'c) t -> int
Return the number of dimensions of the given Bigarray.
val dims : ('a, 'b, 'c) t -> int array
Genarray.dims a returns all dimensions of the Bigarray a , as an array of integers of
length Genarray.num_dims a .
val nth_dim : ('a, 'b, 'c) t -> int -> int
Genarray.nth_dim a n returns the n -th dimension of the Bigarray a . The first dimension
corresponds to n = 0 ; the second dimension corresponds to n = 1 ; the last dimension, to
n = Genarray.num_dims a - 1 .
Raises Invalid_argument if n is less than 0 or greater or equal than Genarray.num_dims a .
val kind : ('a, 'b, 'c) t -> ('a, 'b) Bigarray.kind
Return the kind of the given Bigarray.
val layout : ('a, 'b, 'c) t -> 'c Bigarray.layout
Return the layout of the given Bigarray.
val change_layout : ('a, 'b, 'c) t -> 'd Bigarray.layout -> ('a, 'b, 'd) t
Genarray.change_layout a layout returns a Bigarray with the specified layout , sharing the
data with a (and hence having the same dimensions as a ). No copying of elements is
involved: the new array and the original array share the same storage space. The
dimensions are reversed, such that get v [| a; b |] in C layout becomes get v [| b+1; a+1
|] in Fortran layout.
Since 4.04.0
val size_in_bytes : ('a, 'b, 'c) t -> int
size_in_bytes a is the number of elements in a multiplied by a 's
Bigarray.kind_size_in_bytes .
Since 4.03.0
val get : ('a, 'b, 'c) t -> int array -> 'a
Read an element of a generic Bigarray. Genarray.get a [|i1; ...; iN|] returns the element
of a whose coordinates are i1 in the first dimension, i2 in the second dimension, ..., iN
in the N -th dimension.
If a has C layout, the coordinates must be greater or equal than 0 and strictly less than
the corresponding dimensions of a . If a has Fortran layout, the coordinates must be
greater or equal than 1 and less or equal than the corresponding dimensions of a .
If N > 3 , alternate syntax is provided: you can write a.{i1, i2, ..., iN} instead of
Genarray.get a [|i1; ...; iN|] . (The syntax a.{...} with one, two or three coordinates
is reserved for accessing one-, two- and three-dimensional arrays as described below.)
Raises Invalid_argument if the array a does not have exactly N dimensions, or if the
coordinates are outside the array bounds.
val set : ('a, 'b, 'c) t -> int array -> 'a -> unit
Assign an element of a generic Bigarray. Genarray.set a [|i1; ...; iN|] v stores the
value v in the element of a whose coordinates are i1 in the first dimension, i2 in the
second dimension, ..., iN in the N -th dimension.
The array a must have exactly N dimensions, and all coordinates must lie inside the array
bounds, as described for Genarray.get ; otherwise, Invalid_argument is raised.
If N > 3 , alternate syntax is provided: you can write a.{i1, i2, ..., iN} <- v instead of
Genarray.set a [|i1; ...; iN|] v . (The syntax a.{...} <- v with one, two or three
coordinates is reserved for updating one-, two- and three-dimensional arrays as described
below.)
val sub_left : ('a, 'b, Bigarray.c_layout) t -> int -> int -> ('a, 'b, Bigarray.c_layout)
t
Extract a sub-array of the given Bigarray by restricting the first (left-most) dimension.
Genarray.sub_left a ofs len returns a Bigarray with the same number of dimensions as a ,
and the same dimensions as a , except the first dimension, which corresponds to the
interval [ofs ... ofs + len - 1] of the first dimension of a . No copying of elements is
involved: the sub-array and the original array share the same storage space. In other
terms, the element at coordinates [|i1; ...; iN|] of the sub-array is identical to the
element at coordinates [|i1+ofs; ...; iN|] of the original array a .
Genarray.sub_left applies only to Bigarrays in C layout.
Raises Invalid_argument if ofs and len do not designate a valid sub-array of a , that is,
if ofs < 0 , or len < 0 , or ofs + len > Genarray.nth_dim a 0 .
val sub_right : ('a, 'b, Bigarray.fortran_layout) t -> int -> int -> ('a, 'b,
Bigarray.fortran_layout) t
Extract a sub-array of the given Bigarray by restricting the last (right-most) dimension.
Genarray.sub_right a ofs len returns a Bigarray with the same number of dimensions as a ,
and the same dimensions as a , except the last dimension, which corresponds to the
interval [ofs ... ofs + len - 1] of the last dimension of a . No copying of elements is
involved: the sub-array and the original array share the same storage space. In other
terms, the element at coordinates [|i1; ...; iN|] of the sub-array is identical to the
element at coordinates [|i1; ...; iN+ofs|] of the original array a .
Genarray.sub_right applies only to Bigarrays in Fortran layout.
Raises Invalid_argument if ofs and len do not designate a valid sub-array of a , that is,
if ofs < 1 , or len < 0 , or ofs + len > Genarray.nth_dim a (Genarray.num_dims a - 1) .
val slice_left : ('a, 'b, Bigarray.c_layout) t -> int array -> ('a, 'b, Bigarray.c_layout)
t
Extract a sub-array of lower dimension from the given Bigarray by fixing one or several of
the first (left-most) coordinates. Genarray.slice_left a [|i1; ... ; iM|] returns the
'slice' of a obtained by setting the first M coordinates to i1 , ..., iM . If a has N
dimensions, the slice has dimension N - M , and the element at coordinates [|j1; ...;
j(N-M)|] in the slice is identical to the element at coordinates [|i1; ...; iM; j1; ...;
j(N-M)|] in the original array a . No copying of elements is involved: the slice and the
original array share the same storage space.
Genarray.slice_left applies only to Bigarrays in C layout.
Raises Invalid_argument if M >= N , or if [|i1; ... ; iM|] is outside the bounds of a .
val slice_right : ('a, 'b, Bigarray.fortran_layout) t -> int array -> ('a, 'b,
Bigarray.fortran_layout) t
Extract a sub-array of lower dimension from the given Bigarray by fixing one or several of
the last (right-most) coordinates. Genarray.slice_right a [|i1; ... ; iM|] returns the
'slice' of a obtained by setting the last M coordinates to i1 , ..., iM . If a has N
dimensions, the slice has dimension N - M , and the element at coordinates [|j1; ...;
j(N-M)|] in the slice is identical to the element at coordinates [|j1; ...; j(N-M); i1;
...; iM|] in the original array a . No copying of elements is involved: the slice and the
original array share the same storage space.
Genarray.slice_right applies only to Bigarrays in Fortran layout.
Raises Invalid_argument if M >= N , or if [|i1; ... ; iM|] is outside the bounds of a .
val blit : ('a, 'b, 'c) t -> ('a, 'b, 'c) t -> unit
Copy all elements of a Bigarray in another Bigarray. Genarray.blit src dst copies all
elements of src into dst . Both arrays src and dst must have the same number of
dimensions and equal dimensions. Copying a sub-array of src to a sub-array of dst can be
achieved by applying Genarray.blit to sub-array or slices of src and dst .
val fill : ('a, 'b, 'c) t -> 'a -> unit
Set all elements of a Bigarray to a given value. Genarray.fill a v stores the value v in
all elements of the Bigarray a . Setting only some elements of a to v can be achieved by
applying Genarray.fill to a sub-array or a slice of a .