Provided by: liblexical-failure-perl_0.000007-3_all bug

NAME

       Lexical::Failure - User-selectable lexically-scoped failure signaling

VERSION

       This document describes Lexical::Failure version 0.000007

SYNOPSIS

           package Your::Module;

           # Set up this module for lexical failure handling...
           use Lexical::Failure;

           # Each time module is imported, set up failure handler...
           sub import {
               my ($package, %named_arg) = @_;

               ON_FAILURE( $named_arg{'fail'} );
           }

           # Then, in the module's subs/methods, call fail() to fail...
           sub inverse_square {
               my ($n) = @_;

               if ($n == 0) {
                   fail "Can't invert zero";
               }

               return 1/$n**2;
           }

           sub load_file {
               my ($filename) = @_;

               fail 'No such file: ', $filename
                   if ! -r $filename;

               local (@ARGV, $/) = $filename;
               return readline;
           }

DESCRIPTION

       This module sets up two new keywords: "fail" and "ON_FAILURE", with which you can quickly
       create modules whose failure signaling is lexicially scoped, under the control of client
       code.

       Normally, modules specify some fixed mechanism for error handling and require client code
       to adapt to that policy. One module may signal errors by returning "undef", or perhaps
       some special "error object".  Another may "die" or "croak" on failure. A third may set a
       flag variable. A fourth may require the client code to set up a callback, which is
       executed on failure.

       If you are using all four modules, your own code now has to check for failure in four
       different ways, depending on where the failing component originated. If you would rather
       that all components throw exceptions, or all return "undef", you will probably have to
       write wrappers around 3/4 of them, to convert from their "native" failure mechanism to
       your preferred one.

       Lexical::Failure offers an alternative: a simple mechanism with which module authors can
       generically specify "fail here with this message" (using the "fail" keyword), but then
       allow each block of client code to decide how that failure is reported to it within its
       own lexical scope (using the "ON_FAILURE" keyword).

       Module authors can still provide a default failure signaling mechanism, for when client
       code does not specify how errors are to be reported.  This is handy for ensuring backwards
       compatibility in existing modules that are converted to this new failure signaling
       approach.

INTERFACE

   Accessing the API
       To install the new "fail" and "ON_FAILURE" keywords, simple load the module:

           use Lexical::Failure;

       Changing the names of the API keywords

       To avoid name conflicts, you can change the name of either (or both) of the keywords that
       the module sets up, by passing a named argument when loading the module. The name of the
       argument should be the standard name of the keyword you want to rename, and the value of
       the argument should be a string containing the new name. For example:

           use Lexical::Failure (
               fail       => 'return_error',
               ON_FAILURE => 'set_error_handler',
           );

           sub import {
               my ($package, %named_arg) = @_;

               set_error_handler( $named_arg{'fail'} );
           }

           sub inverse_square {
               my ($n) = @_;

               return_error "Can't invert zero" if $n == 0;

               return 1/$n**2;
           }

   Signaling failure with "fail"
       Once the module is loaded, you simply use the "fail" keyword in place of "return", "return
       undef", "die", "croak", "confess", or any other mechanism by which you would normally
       indicate failure.

       You can call "fail" with any number of arguments, including none, and these will be passed
       to whichever failure handler the client code eventually selects (see below).

       Note that "fail" is a keyword, not a subroutine (that is, it's like "return" itself, and
       not something you can call as part of a larger expression).

   Specifying a lexically scoped failure handler with "ON_FAILURE"
       You set up a failure-signaling interface for client code by placing the "ON_FAILURE"
       keyword in your module's "import()" subroutine (or in a subroutine called from your
       "import()").

       The keyword expects one argument, which specifies how failures in the module are to be
       handled in the lexical scope where your module was loaded.  The single argument can be:

       •   a string containing the name of a named failure handler

       •   a reference to a variable, into which failure signals will be stored

       •   a reference to a subroutine, which will be used as a callback and invoked whenever a
           failure is to be signalled

       •   "undef" (or no argument at all), in which case "ON_FAILURE" does nothing.  This means
           you don't need to bother checking whether a failure specifier was passed in to your
           "import()". Just pass in the resulting "undef" value...and it's ignored.

       Typically, then, you have your "import()" subroutine accept an argument through which
       client code indicates its desired failure mode:

           package Your::Module;

           sub import {
               my ($package, %named_arg) = @_;

               ON_FAILURE $named_arg{'fail'};
           }

       Then the client code can specify different reporting strategies in different lexical
       scopes:

           # Hereafter, report failures by returning undef...
           use Your::Module  fail => 'undef';

           {
               # But in this block, make errors fatal...
               use Your::Module  fail => 'croak';

               {
                   # And in here, set a flag...
                   my $nested_error_flag;
                   use Your::Module  fail => \$nested_error_flag;

                   {
                       # And in here, any error is quietly loggged...
                       use Your::Module  fail => sub { $logger->error(@_) };
                   }
               }

               # Back to croaking errors here
           }

           # Back to returning undef here

       Each "use Your::Module" invokes "Your::Module::import()", whereupon the call to
       "ON_FAILURE" installs the specified failure handler into the lexical scope in which "use
       Your::Module" occurred. The installed handler is specific to Your::Module, so if two or
       more modules are each using Lexical::Failure, client code can set failure-signaling
       policies for each module independently in the same scope.

       Named failure handlers

       If "ON_FAILURE" is passed a string, that string is treated as the name of a predefined
       failure handler.  Lexical::Failure provides six standard named handlers:

       "ON_FAILURE 'null'"
           Specifies that each "fail @args" should act like:

               return;

           That is: return "undef" in scalar context or return an empty list in list context.

           Note that, this context-sensitive behaviour can occasionally lead to subtle errors.
           For example, if these three subroutines are using "ON_FAILURE 'null'" failure
           signaling:

               my %personal_data = (
                   name   => get_name(),
                   age    => get_age(),
                   status => get_status(),
               );

           then if any of them fails, it will return an empty list, messing up the initialization
           of the hash. In such cases, "ON_FAILURE 'undef'" is a better alternative.

       "ON_FAILURE 'undef'"
           Specifies that each "fail @args" should act like:

               return undef;

           Note that to get this behaviour, the argument needs to be 'undef' (a five letter
           string), not "undef" (the special undefined value).

           Note too that, when this handler is selected, "fail" returns an "undef" even in list
           context. This can be problematical, as an "undef" is (to many people's surprise) true
           in list context. For example, if "get_results()" returns "undef" on failure, the
           conditional test of this "if" will still be true:

               if (my @results = get_results($data)) {
                   ....
               }

           because @results will then contain one element (the "undef"), and a non-empty array
           always evaluates true in boolean context.

           For this reason it's usually better to use "ON_FAILURE 'null'" instead.

       "ON_FAILURE 'die'"
           Specifies that each "fail @args" should act like:

               die @args;

       "ON_FAILURE 'croak'"
           Specifies that each "fail @args" should act like:

               Carp::croak(@args);

       "ON_FAILURE 'confess'"
           Specifies that each "fail @args" should act like:

               Carp::confess(@args);

       "ON_FAILURE 'failobj'"
           Specifies that each "fail @args" should act like:

               return Lexical::Failure::Objects->new(
                           msg     => ( @args == 1 ? $args[0] : "@args" ),
                           context => [caller 1]
                      );

           In other words, "ON_FAILURE 'failobj'" causes "fail" to return a special object
           encapsulating the arguments passed to "fail" and the call context in which the "fail"
           occurred.

           See the documentation of Lexical::Failure::Objects for more details on this
           alternative.

       You can also set up other named failure handlers of your own devising (see "Specifying
       additional named failure handlers").

       Variables as failure handlers

       If "ON_FAILURE" is passed a reference to a scalar, array, or hash, that variable becomes
       the "receiver" of subsequent failure reports, as follows:

       "ON_FAILURE \$scalar"
           Specifies that "fail @args" should act like:

               $scalar = [@args];
               return undef;

       "ON_FAILURE \@array"
           Specifies that "fail @args" should act like:

               push @array, [@args];
               return undef;

       "ON_FAILURE \%hash"
           Specifies that "fail @args" should act like:

               $hash{ $CURRENT_SUBNAME } = [@args];
               return undef;

       Subroutines as failure handlers

       "ON_FAILURE" can also be passed a reference to a subroutine, which then acts like a
       callback when failures are signalled.

       In other words:

           ON_FAILURE $subroutine_ref;

       causes "fail @args" to act like:

           return $subroutine_ref->(@args);

       The availability of this alternative means that client code can create entirely new
       failure-signaling behaviours whenever needed. For example:

           # Signal failure by logging an error and returning negatively...
           use Your::Module  fail => sub { $logger->error(@_); return -1; };

           # Signal failure by returning undef/empty list,
           # except in one critical case...
           use Your::Module  fail => sub {
                                         my $msg = "@_";
                                         croak $msg if $msg =~ /dangerous/;
                                         return;
                                     };

           # The very first failure is instantly (and unluckily) fatal...
           use Your::Module  fail => sub { carp(@_); exit(13) };

       Restricting how client code can signal failure

       Because the call to "ON_FAILURE" must occur in your module's "import()" subroutine, you
       always have ultimate control over what types of failure signaling the client code may
       request from your module.

       For example, to prevent client code from requesting "return undef" behaviours:

           sub import {
               my ($package, %named_arg) = @_;

               croak "Can't specify 'undef' as a failure handler"
                   if $named_arg{'fail'} eq 'undef';

               ON_FAILURE $named_arg{'fail'};
           }

       or to quietly convert 'die' behaviours into (much more useful) 'croak' behaviours:

           sub import {
               my ($package, %named_arg) = @_;

               $named_arg{'fail'} =~ s/^die$/croak/;

               ON_FAILURE $named_arg{'fail'};
           }

       Specifying a module's default failure handler

       In any scope where no explicit failure signaling behaviour has been specified,
       Lexical::Failure defaults to its standard 'croak' behaviour (see "Named failure
       handlers").

       However, you can also specify a different default for your module, by adding a named
       argument when you load Lexical::Failure:

           # Default to full confession on failure...
           use Lexical::Failure  default => 'confess';

           # Default to 'return undef or empty list' on failure...
           use Lexical::Failure  default => 'null';

           # Default to instant fatality on failure...
           use Lexical::Failure  default => sub { carp(@_); exit() };

       The values allowed for the 'default' option are somewhat more restrictive than those which
       can be passed directly to "ON_FAILURE"; you can specify only standard named handlers (see
       "Named failure handlers") or a subroutine reference.

       If you need your default to be a non-standard named handler (see "Specifying additional
       named failure handlers") or a reference to a variable, you must arrange that in your
       "import()" instead.  For example:

           sub import {
               my ($package, %named_arg) = @_;

               # Install failure signaling, if specified...
               if (defined $named_arg{'fail'}) {
                   ON_FAILURE $named_arg{'fail'};
               }

               # Otherwise, default to pushing errors onto a package variable
               # (yeah, this is a HORRIBLE idea, but it's what our boss decided!)
               else {
                   ON_FAILURE \@Your::Module::errors;
               }
           }

       Specifying additional named failure handlers

       The six standard named failure handlers provide convenient declarative shortcuts for
       client code. That is, instead of constantly having to create messy subroutines like:

           use Your::Module
               fail => sub {
                   return Lexical::Failure::Objects->new(
                               msg     => (@_ == 1 ? $_[0] : "@_"),
                               context => [caller 1],
                          );
               };

       client code can just request:

           use Your::Module  fail => 'failobj';

       However, you may wish to offer a similar declarative interface for other failure-signaling
       behaviours that your client code is likely to need.  For example:

           use Your::Module  fail => 'logged';

           use Your::Module  fail => 'exit';

           use Your::Module  fail => 'loud undef';

       Lexical::Failure provides a simple way to set up extra named handlers like these. You just
       specify the name and associated callback for each when loading the module:

           package Your::Module;

           use Lexical::Failure  handlers => {
               'logged'     =>  sub { $logger->error(@_);     },
               'exit'       =>  sub { say @_; exit;           },
               'loud undef' =>  sub { carp(@_); return undef; },
           };

       The 'handlers' option expects a reference to a hash, in which each key is the name of a
       new named failure handler, and each corresponding value is a reference to a subroutine
       implementing the behaviour of that named handler.

       Once specified, any of the new handler names may be passed to "ON_FAILURE" to specify that
       "fail" should use the corresponding callback to signal failures.

       Note that any extra named handlers defined in this way are only available from the module
       in which they are defined.

DIAGNOSTICS

       "Unknown failure handler: %s"
           You called "ON_FAILURE" with a string as the handler specification. However, that
           string was not one of the standard named handlers ('confess', 'croak', 'die',
           'failobj', 'undef', or 'null'), nor any of the extra handlers you may have specified
           with a 'handlers' option when loading Lexical::Failure.

           Did you perhaps misspell the handler name?

       "Unknown default failure handler: %s"
           When loading Lexical::Failure, you specified a default handler for all scopes like so:

               use Lexical::Failure  default => 'SOME_STRING';

           However, the string you specified did not match the name of any of the standard
           handlers ('confess', 'croak', 'die', 'failobj', 'undef', or 'null') nor the name of
           any handler you had specified yourself using the 'handlers' option.

           Did you perhaps misspell the handler name?

       "Can't call ON_FAILURE after compilation"
           Lexical failure handlers must be specified at compile-time (usually in your module's
           "import()" subroutine).  However, you called "ON_FAILURE" at runtime.

           Move the call into your module's "import()", or into some other subroutine that
           "import()" calls.

       "Can't call ON_FAILURE outside a subroutine"
           You probably attempted to set up a lexical handler at the top level of your module's
           source code. For example:

               package Your::Module;

               use Lexical::Failure;
               ON_FAILURE('die');

           The lexical hinting mechanism that Lexical::Failure uses only works when "ON_FAILURE"
           is called from within your module's "import()" subroutine (or from a subroutine that
           "import()" itself calls).

           To achieve the "set a default handler for my module" effect intended in the previous
           example, rewrite it either as:

               package Your::Module;

               use Lexical::Failure;
               sub import { ON_FAILURE('die'); }

           or simply:

               package Your::Module;

               use Lexical::Failure default => 'die';

       "Missing rename for %s"
           You tried to rename either "fail" or "ON_FAILURE" as part of your "use
           Lexical::Failure" call, but forgot to include the new name for the subroutine (i.e.
           you left out the argument expected after 'fail' or 'ON_FAILURE').

       "Missing specification for %s"
           You tried to specify either the 'default' or 'handlers' option as part of your "use
           Lexical::Failure" call, but forgot to include the corresponding default value or
           handlers hash (i.e. you left out the argument expected after 'default' or 'handlers').

       "Value for %s option must be a %s"
           You passed a keyword "=>" value pair to "use Lexical::Failure", but the value was of
           the wrong type for that particular keyword. See "Changing the names of the API
           keywords" or "Specifying a module's default failure handler" or "Specifying additional
           named failure handlers" for the correct usage.

       "Handlers in 'handlers' hash must all be code references"
           The 'handlers' option to "use Lexical::Failure" expects a reference to a hash in which
           each value is a code reference. At least one of the values in the hash you passed was
           something else.

       "Unexpected argument (%s)"
           "use Lexical::Failure" accepts only four arguments:

               use Lexical::Failure (
                   fail       => $NEW_NAME,
                   ON_FAILURE => $NEW_NAME,
                   default    => $HANDLER_NAME,
                   handlers   => \%HANDLER_HASH,
               );

           You attempted to pass it something else. Or perhaps you misspelled one of the above
           keywords?

       "Invalid handler type (%s) in call to ON_FAILURE"
           The argument passed to "ON_FAILURE" must be either a string (i.e. the name of a named
           handler) or a reference to a subroutine (i.e. the handler itself) or a reference to a
           variable (i.e.  the lvalue into which error messages are to be assigned).

           You passed it something else (probably a regex or a reference to a reference).

CONFIGURATION AND ENVIRONMENT

       Lexical::Failure requires no configuration files or environment variables.

DEPENDENCIES

       Requires the modules: Scope::Upper, Keyword::Simple, PadWalker, and Test::Effects.

       Also requires the Lexical::Failure::Objects helper module included in its distribution.

INCOMPATIBILITIES

       None reported.

BUGS AND LIMITATIONS

       No bugs have been reported.

       Please report any bugs or feature requests to "bug-lexical-failure@rt.cpan.org", or
       through the web interface at <http://rt.cpan.org>.

AUTHOR

       Damian Conway  "<DCONWAY@CPAN.org>"

LICENCE AND COPYRIGHT

       Copyright (c) 2013, Damian Conway "<DCONWAY@CPAN.org>". All rights reserved.

       This module is free software; you can redistribute it and/or modify it under the same
       terms as Perl itself. See perlartistic.

DISCLAIMER OF WARRANTY

       BECAUSE THIS SOFTWARE IS LICENSED FREE OF CHARGE, THERE IS NO WARRANTY FOR THE SOFTWARE,
       TO THE EXTENT PERMITTED BY APPLICABLE LAW. EXCEPT WHEN OTHERWISE STATED IN WRITING THE
       COPYRIGHT HOLDERS AND/OR OTHER PARTIES PROVIDE THE SOFTWARE "AS IS" WITHOUT WARRANTY OF
       ANY KIND, EITHER EXPRESSED OR IMPLIED, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
       WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE. THE ENTIRE RISK AS TO
       THE QUALITY AND PERFORMANCE OF THE SOFTWARE IS WITH YOU. SHOULD THE SOFTWARE PROVE
       DEFECTIVE, YOU ASSUME THE COST OF ALL NECESSARY SERVICING, REPAIR, OR CORRECTION.

       IN NO EVENT UNLESS REQUIRED BY APPLICABLE LAW OR AGREED TO IN WRITING WILL ANY COPYRIGHT
       HOLDER, OR ANY OTHER PARTY WHO MAY MODIFY AND/OR REDISTRIBUTE THE SOFTWARE AS PERMITTED BY
       THE ABOVE LICENCE, BE LIABLE TO YOU FOR DAMAGES, INCLUDING ANY GENERAL, SPECIAL,
       INCIDENTAL, OR CONSEQUENTIAL DAMAGES ARISING OUT OF THE USE OR INABILITY TO USE THE
       SOFTWARE (INCLUDING BUT NOT LIMITED TO LOSS OF DATA OR DATA BEING RENDERED INACCURATE OR
       LOSSES SUSTAINED BY YOU OR THIRD PARTIES OR A FAILURE OF THE SOFTWARE TO OPERATE WITH ANY
       OTHER SOFTWARE), EVEN IF SUCH HOLDER OR OTHER PARTY HAS BEEN ADVISED OF THE POSSIBILITY OF
       SUCH DAMAGES.