Provided by: liblog-report-perl_1.33-1_all 
NAME
Log::Report::Dispatcher::Try - capture all reports as exceptions
INHERITANCE
Log::Report::Dispatcher::Try
is a Log::Report::Dispatcher
SYNOPSIS
try { ... }; # mind the ';' !!
if($@) { # signals something went wrong
if(try {...}) { # block ended normally
my $x = try { read_temperature() };
my @x = try { read_lines_from_file() };
try { ... } # no comma!!
mode => 'DEBUG', accept => 'ERROR-';
try sub { ... }, # with comma
mode => 'DEBUG', accept => 'ALL';
try \&myhandler, accept => 'ERROR-';
try { ... } hide => 'TRACE';
print ref $@; # Log::Report::Dispatcher::Try
$@->reportFatal; # re-dispatch result of try block
$@->reportAll; # ... also warnings etc
if($@) {...} # if errors
if($@->failed) { # same # }
if($@->success) { # no errors # }
try { # something causes an error report, which is caught
failure 'no network';
};
$@->reportFatal(to => 'syslog'); # overrule destination
print $@->exceptions; # no re-cast, just print
DESCRIPTION
The try works like Perl's build-in "eval()", but implements real exception handling which
Perl core lacks.
The Log::Report::try() function creates this "::Try" dispatcher object with name 'try'.
After the "try()" is over, you can find the object in $@. The $@ as "::Try" object
behaves exactly as the $@ produced by "eval", but has many added features.
The "try()" function catches fatal errors happening inside the BLOCK (CODE reference which
is just following the function name) into the "::Try" object $@. The errors are not
automatically progressed to active dispatchers. However, non-fatal exceptions (like info
or notice) are also collected (unless not accepted, see new(accept), but also immediately
passed to the active dispatchers (unless the reason is hidden, see new(hide))
After the "try()" has run, you can introspect the collected exceptions. Typically, you
use wasFatal() to get the exception which terminated the run of the BLOCK.
Extends "DESCRIPTION" in Log::Report::Dispatcher.
METHODS
Extends "METHODS" in Log::Report::Dispatcher.
Constructors
Extends "Constructors" in Log::Report::Dispatcher.
$obj->close()
Inherited, see "Constructors" in Log::Report::Dispatcher
Log::Report::Dispatcher::Try->new($type, $name, %options)
-Option --Defined in --Default
accept Log::Report::Dispatcher depend on mode
charset Log::Report::Dispatcher <undef>
died undef
exceptions []
format_reason Log::Report::Dispatcher 'LOWERCASE'
hide 'NONE'
locale Log::Report::Dispatcher <system locale>
mode Log::Report::Dispatcher 'NORMAL'
on_die 'ERROR'
accept => REASONS
charset => CHARSET
died => STRING
The exit string or object ($@) of the eval'ed block, in its unprocessed state.
exceptions => ARRAY
ARRAY of Log::Report::Exception objects.
format_reason => 'UPPERCASE'|'LOWERCASE'|'UCFIRST'|'IGNORE'|CODE
hide => REASONS|ARRAY|'ALL'|'NONE'
[1.09] see hide()
locale => LOCALE
mode => 'NORMAL'|'VERBOSE'|'ASSERT'|'DEBUG'|0..3
on_die => 'ERROR'|'PANIC'
When code which runs in this block exits with a die(), it will get translated into a
Log::Report::Exception using Log::Report::Die::die_decode(). How serious are we
about these errors?
Accessors
Extends "Accessors" in Log::Report::Dispatcher.
$obj->die2reason()
Returns the value of new(on_die).
$obj->died( [STRING] )
The exit string or object ($@) of the eval'ed block, in its unprocessed state. They
will always return true when they where deadly, and it always stringifies into
something useful.
$obj->exceptions()
Returns all collected "Log::Report::Exceptions". The last of them may be a fatal one.
The other are non-fatal.
$obj->hide(@reasons)
[1.09] By default, the try will only catch messages which stop the execution of the
block (errors etc, internally a 'die'). Other messages are passed to the parent
dispatchers.
This option gives the opportunity to stop, for instance, trace messages. Those
messages are still collected inside the try object (unless excluded by new(accept)),
so may get passed-on later via reportAll() if you like.
Be warned: Using this method will reset the whole 'hide' configuration: it's a set not
an add.
example: change the setting of the running block
my $parent_try = dispatcher 'active-try';
$parent_try->hide('ALL');
$obj->hides($reason)
Check whether the try stops message which were produced for $reason.
$obj->isDisabled()
Inherited, see "Accessors" in Log::Report::Dispatcher
$obj->mode()
Inherited, see "Accessors" in Log::Report::Dispatcher
$obj->name()
Inherited, see "Accessors" in Log::Report::Dispatcher
$obj->needs( [$reason] )
Inherited, see "Accessors" in Log::Report::Dispatcher
$obj->type()
Inherited, see "Accessors" in Log::Report::Dispatcher
Logging
Extends "Logging" in Log::Report::Dispatcher.
$obj->addSkipStack(@CODE)
Log::Report::Dispatcher::Try->addSkipStack(@CODE)
Inherited, see "Logging" in Log::Report::Dispatcher
$obj->collectLocation()
Log::Report::Dispatcher::Try->collectLocation()
Inherited, see "Logging" in Log::Report::Dispatcher
$obj->collectStack( [$maxdepth] )
Log::Report::Dispatcher::Try->collectStack( [$maxdepth] )
Inherited, see "Logging" in Log::Report::Dispatcher
$obj->log($opts, $reason, $message)
Other dispatchers translate the message here, and make it leave the program. However,
messages in a "try" block are only captured in an intermediate layer: they may never
be presented to an end-users. And for sure, we do not know the language yet.
The $message is either a STRING or a Log::Report::Message.
$obj->reportAll(%options)
Re-cast the messages in all collect exceptions into the defined dispatchers, which
were disabled during the try block. The %options will end-up as HASH of %options to
Log::Report::report(); see Log::Report::Exception::throw() which does the job.
$obj->reportFatal()
Re-cast only the fatal message to the defined dispatchers. If the block was left
without problems, then nothing will be done. The %options will end-up as HASH of
%options to Log::Report::report(); see Log::Report::Exception::throw() which does the
job.
$obj->skipStack()
Inherited, see "Logging" in Log::Report::Dispatcher
$obj->stackTraceLine(%options)
Log::Report::Dispatcher::Try->stackTraceLine(%options)
Inherited, see "Logging" in Log::Report::Dispatcher
$obj->translate(HASH-$of-%options, $reason, $message)
Inherited, see "Logging" in Log::Report::Dispatcher
Status
$obj->failed()
Returns true if the block was left with an fatal message.
$obj->showStatus()
If this object is kept in $@, and someone uses this as string, we want to show the
fatal error message.
The message is not very informative for the good cause: we do not want people to
simply print the $@, but wish for a re-cast of the message using reportAll() or
reportFatal().
$obj->success()
Returns true if the block exited normally.
$obj->wasFatal(%options)
Returns the Log::Report::Exception which caused the "try" block to die, otherwise an
empty LIST (undef).
-Option--Default
class undef
class => CLASS|REGEX
Only return the exception if it was fatal, and in the same time in the specified
CLASS (as string) or matches the REGEX. See Log::Report::Message::inClass()
DETAILS
Extends "DETAILS" in Log::Report::Dispatcher.
OVERLOADING
overload: boolean
Returns true if the previous try block did produce a terminal error. This "try"
object is assigned to $@, and the usual perl syntax is "if($@) {...error-handler...}".
overload: stringify
When $@ is used the traditional way, it is checked to have a string content. In this
case, stringify into the fatal error or nothing.
SEE ALSO
This module is part of Log-Report distribution version 1.33, built on July 17, 2021.
Website: http://perl.overmeer.net/CPAN/
LICENSE
Copyrights 2007-2021 by [Mark Overmeer <markov@cpan.org>]. For other contributors see
ChangeLog.
This program is free software; you can redistribute it and/or modify it under the same
terms as Perl itself. See http://dev.perl.org/licenses/