Provided by: libnet-dns-native-perl_0.22-2build1_amd64 
NAME
Net::DNS::Native - non-blocking system DNS resolver
SYNOPSIS
use Net::DNS::Native;
use IO::Select;
use Socket;
my $dns = Net::DNS::Native->new();
my $sock = $dns->getaddrinfo("google.com");
my $sel = IO::Select->new($sock);
$sel->can_read(); # wait until resolving done
my ($err, @res) = $dns->get_result($sock);
die "Resolving failed: ", $err if ($err);
for my $r (@res) {
warn "google.com has ip ",
$r->{family} == AF_INET ?
inet_ntoa((unpack_sockaddr_in($r->{addr}))[1]) : # IPv4
Socket::inet_ntop(AF_INET6, (unpack_sockaddr_in6($r->{addr}))[1]); # IPv6
}
use Net::DNS::Native;
use AnyEvent;
use Socket;
my $dns = Net::DNS::Native->new;
my $cv = AnyEvent->condvar;
$cv->begin;
for my $host ('google.com', 'google.ru', 'google.cy') {
my $fh = $dns->inet_aton($host);
$cv->begin;
my $w; $w = AnyEvent->io(
fh => $fh,
poll => 'r',
cb => sub {
my $ip = $dns->get_result($fh);
warn $host, $ip ? " has ip " . inet_ntoa($ip) : " has no ip";
$cv->end;
undef $w;
}
)
}
$cv->end;
$cv->recv;
DESCRIPTION
This class provides several methods for host name resolution. It is designed to be used
with event loops. All resolving are done by getaddrinfo(3) implemented in your system
library. Since getaddrinfo() is blocking function and we don't want to block, calls to
this function will be done in separate thread. This class uses system native threads and
not perl threads. So overhead shouldn't be too big.
INSTALLATION WARNING
For some platforms to support threaded extensions like this one your perl should be linked
with threads library. At the installation time this module will check is your perl is good
enough and will not install if not.
If it will fail to install use instructions listed below.
One of the possible solution to make your perl compatible with this module is to build
perl with perl threads support using "-Dusethreads" for "Configure" script. Other solution
is to use "-A prepend:libswanted="pthread "", which will just link non-threaded perl with
pthreads. This is done by default since Perl 5.22.
On Linux with perl not linked with pthreads this module may die with appropriate message
at require time. This may happen if you are called some functions from system library
related to DNS operations before loading of "Net::DNS::Native" (or some module, like
"IO::Socket::IP", that you are already loaded, called it internally). So, on such perl
"use IO::Socket::IP; use Net::DNS::Native" may fail, but "use Net::DNS::Native; use
IO::Socket::IP" will success. The reason of such check inside "Net::DNS::Native" is that
calls to this functions (gethostbyname, getprotobyname, inet_aton, getaddrinfo, ...) will
cause loading of non-thread safe versions of DNS related stuff and "Net::DNS::Native"
loaded after that will not be able to override this with thread safe versions. So, at one
moment your program will simply exit with segfault. This is why this check and rule are
very important.
METHODS
new
This is a class constructor. Accepts this optional parameters:
pool => $size
If $size>0 will create thread pool with size=$size which will make resolving job.
Otherwise will use default behavior: create and finish thread for each resolving
request. If thread pool is not enough big to process all supplied requests, than this
requests will be queued until one of the threads will become free to process next
request from the queue.
extra_thread => $bool
If pool option specified and $bool has true value will create temporary extra thread
for each request that can't be handled by the pool (when all workers in the pool are
busy) instead of pushing it to the queue. This temporary thread will be finished
immediatly after it will process request.
notify_on_begin => $bool
Extra mechanizm to notify caller that resolving for some host started. This is usefull
for those who uses thread pool without "extra_thread" option. When pool becomes full
new queries will be queued, so you can specify $bool with true value if you want to
receive notifications when resolving will be really started. To notify it will simply
make $handle received by methods below readable. After that you will need to read data
from this handle to make it non readable again, so you can receive next notification,
when host resolving will be done. There will be 1 byte of data which you should read.
"1" for notification about start of the resolving and "2" for notification about
finish of the resolving.
my $dns = Net::DNS::Native->new(pool => 1, notify_on_begin => 1);
my $handle = $dns->inet_aton("google.com");
my $sel = IO::Select->new($handle);
$sel->can_read(); # wait "begin" notification
sysread($handle, my $buf, 1); # $buf eq "1", $handle is not readable again
$sel->can_read(); # wait "finish" notification
# resolving done
# we can sysread($handle, $buf, 1); again and $buf will be eq "2"
# but this is not necessarily
my $ip = $dns->get_result($handle);
getaddrinfo($host, $service, $hints)
This is the most powerfull method. May resolve host to both IPv4 and IPv6 addresses. For
full documentation see getaddrinfo(). This method accepts same parameters but instead of
result returns handle on which you need to wait for availability to read.
inet_pton($family, $host)
This method will resolve $host accordingly to $family, which may be AF_INET to resolve to
IPv4 or AF_INET6 to resolve to IPv6. For full documentation see inet_pton(). This method
accepts same parameters but instead of result returns handle on which you need to wait for
availability to read.
inet_aton($host)
This method may be used only for resolving to IPv4. For full documentation see
inet_aton(). This method accepts same parameters but instead of result returns handle on
which you need to wait for availability to read.
gethostbyname($host)
This method may be used only for resolving to IPv4. For full documentation see
gethostbyname(). This method accepts same parameters but instead of result returns handle
on which you need to wait for availability to read.
get_result($handle)
After handle returned by methods above will became ready for read you should call this
method with handle as argument. It will return results appropriate to the method which
returned this handle. For "getaddrinfo" this will be "($err, @res)" list. For "inet_pton"
and "inet_aton" $packed_address or "undef". For "gethostbyname()" $packed_address or
"undef" in scalar context and "($name,$aliases,$addrtype,$length,@addrs)" in list context.
NOTE: it is important to call get_result() on returned handle when it will become ready
for read. Because this method destroys resources associated with this handle. Otherwise
you will get memory leaks.
timedout($handle)
Mark resolving operation associated with this handle as timed out. This will not interrupt
resolving operation (because there is no way to interrupt getaddrinfo(3) correctly), but
will automatically discard any results returned when resolving will be done. So, after
"timedout($handle)" you can forget about $handle and associated resolving operation. And
don't need to call "get_result($handle)" to destroy resources associated with this handle.
Furthermore, if you are using thread pool and all threads in pool are busy and
"extra_thread" option not specified, but 1 resolving operation from this pool marked as
timed out and you'll add one more resolving operation, this operation will not be queued.
Instead of this 1 temporary extra thread will be created to process this operation. So you
can think about "timedout" like about real interrupter of long running resolving
operation. But you are warned how it really works. Note: since 0.16 handles will be
automatically marked as timedout during destruction, so you no need more to call
"timedout($handle)" yourself, just lose last reference to this handle.
AUTHOR
Oleg G, <oleg@cpan.org>
COPYRIGHT AND LICENSE
This library is free software; you can redistribute it and/or modify it under the same
terms as Perl itself