Provided by: libpcp3-dev_5.3.7-1_amd64 bug

NAME

       PCPIntro - introduction to the Performance Co-Pilot (PCP) libraries

INTRODUCTION

       Performance  Co-Pilot (PCP) is a toolkit designed for monitoring and managing system-level
       performance.

       The PCP libraries support the APIs required to create new performance monitoring tools and
       new  agents  (or  PMDAs)  to  export performance data.  The libpcp library is used in both
       cases.  The libpcp_pmda library is used only for PMDAs.

       Individual library routines are documented in their own manual page entries.

       Most routines return an integer value; greater than equal to zero  for  success  and  less
       than  zero  for  an  error.  The error codes have symbolic names defined in <pcp/pmapi.h>.
       Other negative values are used to encode errors that can  be  mapped  to  the  traditional
       errno  values  defined  in  <errno.h>, with the value negated.  To translate all PCP error
       codes into useful messages use either pmerr(1) or pmErrStr(3); the latter may also be used
       to decode the -errno cases.

GENERAL ERRORS

       These common errors may occur in various PCP interactions.

       PM_ERR_TIMEOUT
           Timeout waiting for a response from PMCD
           Many  interactions  between  PCP applications involve synchronous message passing, and
           these  are  subject  to  timeout  constraints.   These  errors  are  most   frequently
           encountered when using network connections with slow data rates or long latencies.

           For  client-pmcd  timeouts, refer to PCPIntro(1) for environment variables that may be
           used to modify the timeout thresholds.  For pmcd-PMDA timeouts refer to the -t and  -q
           options  of  pmcd(1)  and  the PCP metric pmcd.control.timeout that can be dynamically
           changed with pmstore(1).

       PM_ERR_APPVERSION
           Metric not supported by this version of monitored application
           Some performance metrics are unavailable from  specific  versions  of  the  associated
           PMDA,  or  may be unavailable because the underlying instrumentation has changed or is
           not installed or is not enabled.  This error is used in  results  from  pmFetch(3)  to
           indicate these situations.

       PM_ERR_IPC
           IPC protocol failure
           Generic  protocol  failure  on  a  pipe or socket connecting two PCP applications, eg.
           client-pmcd, or client-pmtime, or PMDA-pmcd or pmlc-pmlogger.

       PM_ERR_TEXT
           One-line or help text is not available
           Set by a PMDA, and passed back to a PCP client, to indicate that the PMDA is unable to
           supply the requested metric or instance domain help text.

       PM_ERR_VALUE
           Missing metric value(s)
           This  error  is  used  for  a number of conditions in which the value of a performance
           metric is inappropriate for the context in which it is being used, eg.

           (a) Bad value for the metric  pmcd.timezone  when  trying  to  set  the  timezone  via
               pmNewContextZone(3) for a remote or archive context.

           (b) Attempting  to  interpolate  values for a metric with non-numeric data type from a
               set of PCP archives.

           (c) A bad result data structure passed to pmStore(3).

       PM_ERR_NAME
           Unknown metric name
           Just what the message says.

       PM_ERR_PMID
           Unknown or illegal metric identifier
           Just what the message says.

       PM_ERR_INDOM
           Unknown or illegal instance domain identifier
           A request nominates an instance domain that is unknown or PM_INDOM_NULL.  May occur as
           a   consequence  of  the  instance  domain  identifier  passed  by  a  PCP  client  to
           pmGetInDom(3),      pmLookupInDom(3),      pmNameInDom(3),       pmGetInDomArchive(3),
           pmLookupInDomArchive(3),  pmNameInDomArchive(3)  or a request passed from pmcd(1) to a
           PMDA.

       PM_ERR_EOF
           IPC channel closed
           End of file on a pipe or socket connecting two PCP applications, eg.  client-pmcd,  or
           client-pmtime or PMDA-pmcd.

       PM_ERR_NOCONTEXT
           Attempt to use an illegal context
           Typically   caused   by  a  PCP  client  that  tries  to  make  calls  before  calling
           pmNewContext(3) or after calling pmDestroyContext(3).

       PM_ERR_PERMISSION
           No permission to perform requested operation
           PCP-specific access controls apply  to  pmcd(1)  and  pmlogger(1).   Platform-specific
           permission errors are returned as -EPERM.

       PM_ERR_CONV
           Impossible value or scale conversion
           Some  value  conversion  requests  are  illegal,  eg. bad debug flag symbolic name for
           -D/--debug option, or asking pmExtractValue(3) to translate non-numeric data types  to
           numbers and vice versa.

       PM_ERR_TRUNC
           Truncation in value conversion
           Some  conversion requests to pmExtractValue(3) cannot be performed based on the metric
           types and values involved, in this case conversion would result in loss of precision.

       PM_ERR_SIGN
           Negative value in conversion to unsigned
           Some conversion requests to pmExtractValue(3) cannot be performed based on the  metric
           types  and  values  involved,  in this case converting a negative value to an unsigned
           value.

       PM_ERR_TYPE
           Unknown or illegal metric type
           The metric type is held in the metric descriptor and sometimes encoded in  the  metric
           values  returned  from  a  call  to  pmFetch(3).  Legal values for the metric type are
           defined by the PM_TYPE_* macros in <pcp/pmapi.h>.

       PM_ERR_UNIT
           Illegal pmUnits specification
           Some conversion requests to pmConvScale(3) cannot  be  performed  due  to  illegal  or
           incompatible specifications of the source and destination units.

       PM_ERR_PROFILE
           Explicit instance identifier(s) required
           Some  PMDAs,  especially  the  proc  PMDA,  will  not  return  ``all instances'' for a
           pmFetch(3) request due to the cost.  The client  must  explicitly  built  an  instance
           profile  using  pmAddProfile(3) and/or pmDelProfile(3) before calling pmFetch(3).  See
           also the -F/--fetchall option to pminfo(1).

       PM_ERR_INST
           Unknown or illegal instance identifier
           A request to a PMDA nominates an instance that is unknown.  May occur as a consequence
           of the profile established prior to a pmFetch(3) call, or an explicit instance name or
           identifier to pmLookupInDom(3) or pmNameInDom(3).

       PM_ERR_MODE
           Illegal mode specification
           Illegal mode argument to pmSetMode(3).

       PM_ERR_PROFILESPEC
           NULL pmInDom with non-NULL instlist
           Bad arguments passed from a PCP client to pmAddProfile(3).

       PM_ERR_TOOSMALL
           Insufficient elements in list
           Parameter passing error by caller specifying a list with  less  than  one  element  to
           pmFetch(3), pmLookupName(3) or pmStore(3).

       PM_ERR_FAULT
           QA fault injected
           For testing, there is a ``fault injection'' version of libpcp and this error indicates
           a misuse of the fault injection infrastructure.

       PM_ERR_THREAD
           Operation not supported for multi-threaded applications
           As documented in PMAPI(3) and elsewhere, some libpcp routines are intended solely  for
           use from single-threaded applications.

       PM_ERR_NOCONTAINER
           Container  not  found  The  user  supplied  container  name  does  not match any known
           container.

       PM_ERR_BADSTORE
           Bad input to pmstore
           The metric value provided for a pmStore(3) operation is in the wrong format, or of the
           wrong type or has the wrong number of values.

       PM_ERR_TOOBIG
           Result size exceeded
           Indicates  a  fatal  error  in  the  message (or PDU) passing protocol between two PCP
           applications.  This is an internal error, and other than an exotic networking failure,
           should not occur.

       PM_ERR_RESET
           PMCD reset or configuration change
           Not used.

           Refer  to  pmFetch(3)  for  an  alternative mechanism that may be used to notify a PCP
           client when pmcd(1) has experienced one or more configuration changes since  the  last
           request  from  the  client.   Usually  these changes involve a change to the namespace
           exported via pmcd and/or changes to the PMDAs under pmcd's control.

       PM_ERR_FAULT
           QA fault injected
           Used only for PCP Quality Assurance (QA) testing.

       PM_ERR_NYI
           Functionality not yet implemented
           Self explanatory and rarely used.

       PM_ERR_GENERIC
           Generic error, already reported above
           Rarely used, this error may be returned when the error condition is  a  consequent  of
           some earlier returned error and a more precise characterization is not possible.

       PM_ERR_BADDERIVE
           Derived metric definition failed
           When  registering  a  derived metric, the metric expression is either syntactically or
           semantically incorrect.

       PM_ERR_NOLABELS
           No support for metric label metadata
           Operation requires metric labels, but none are available.

CLIENT-PMCD ERRORS

       These errors may occur in the interactions between a  PCP  client  and  pmcd(1)  providing
       real-time performance data.

       PM_ERR_NOAGENT
              No PMCD agent for domain of request
              A  request sent to pmcd(1) requires information from an agent or PMDA that does not
              exist.  Usually this means the namespace  being  used  by  the  client  application
              contains metric names from a previously installed PMDA.

       PM_ERR_CONNLIMIT
              PMCD connection limit for this host exceeded
              The  client  connection  limit  for  pmcd(1)  is  controlled by the optional access
              controls in $PCP_PMCDCONF_PATH.  By default there is no limit imposed  by  the  PCP
              code, and this error would not be seen.

       PM_ERR_AGAIN
              Try again. Information not currently available
              Used  to  notify  a  PCP  client  that  the  PMDA  responsible  for  delivering the
              information is temporarily unavailable.  See also PM_ERR_PMDANOTREADY.

       PM_ERR_NOPROFILE
              Missing profile - protocol botch
              Internal error in the communication between a  client  application  and  pmcd(1)  -
              should not occur.

       PM_ERR_NEEDCLIENTCERT
              PMCD requires a client certificate Authentication failure.

       PM_ERR_PMDAFENCED
              PMDA is currently fenced and unable to respond to requests
              A  privileged  user  has  decided to isolate a PMDA from pmcd(1) using a pmStore(1)
              operation on the pmcd.agent.fenced metric, which means all fetch-level requests  to
              that PMDA are being blocked.

CLIENT-ARCHIVE ERRORS

       These  errors  may occur in the interactions between a PCP client and the library routines
       that provide historical performance data from PCP archives created by pmlogger(1).

       PM_ERR_LOGFILE
              Missing archive file
              Each PCP archive consists of multiple physical files as described  in  pmlogger(1).
              This error occurs when one of the physical files is missing or cannot be opened for
              reading.

       PM_ERR_EOL
              End of PCP archive log
              An attempt is made to read past the end file of the last volume of  a  set  of  PCP
              archives,  or  past  the  end  of  the time window (as specified with a -T/--finish
              option) for a set of PCP archives.

       PM_ERR_NOTHOST
              Operation requires context with host source of metrics
              Calls to pmStore(3) require a host context and are not supported for PCP archives.

              For archives created with versions of PCP prior to  4.0,  the  pmLookupText(3)  and
              pmLookupInDomText(3)  calls  will return this code for archive PMAPI contexts (help
              and one-line text was not previously recorded in archive logs).

       PM_ERR_LOGREC
              Corrupted record in a PCP archive log
              PCP archives can become corrupted for a variety of reasons, but the most common  is
              premature termination of pmlogger(1) without flushing its output buffers.

       PM_ERR_LABEL
              Illegal label record at start of a PCP archive log file
              Each  physical file in a PCP archive should begin with a common label record.  This
              is a special case of PM_ERR_LOGREC errors.

       PM_ERR_NODATA
              Empty archive log file
              An empty physical file can never be part of a valid PCP archive (at least the label
              record should be present).  This is a special case of PM_ERR_LOGREC errors.

       PM_ERR_NOTARCHIVE
              Operation requires context with archive source of metrics
              A   call   to   one  of  the  archive  variant  routines,  i.e.  pmFetchArchive(3),
              pmGetInDomArchive(3), pmLookupInDomArchive(3) or  pmNameInDomArchive(3),  when  the
              current context is not associated with a set of PCP archives.

       PM_ERR_PMID_LOG
              Metric not defined in the PCP archive log
              A   PCP  client  has  requested  information  about  a  metric,  and  there  is  no
              corresponding information in the set of PCP archives.  This should not  happen  for
              well-behaved PCP clients.

       PM_ERR_INDOM_LOG
              Instance domain identifier not defined in the PCP archive log
              A  PCP  client  has  requested information about an instance domain for one or more
              performance metrics, and there is no corresponding information in the  set  of  PCP
              archives.   If  the  client is using metric descriptors from the set of archives to
              identify the instance domain, this is less likely to happen.

              Because instance domains may vary over time, clients may need to  use  the  variant
              routines  pmGetInDomArchive(3)  or pmLookupInDomArchive(3) or pmNameInDomArchive(3)
              to manipulate the union of the instances in an instance domain over the life of  an
              archive.

       PM_ERR_INST_LOG
              Instance identifier not defined in the PCP archive log
              A  PCP  client has requested information about a specific instance of a performance
              metric, and there is no corresponding information in the set of PCP  archives.   If
              the  client is using instance names from the instance domain in the set of archives
              (rather than hard-coded instance names) and instance identifiers from  the  results
              returned by pmFetch(3) or pmFetchArchive(3) this is less likely to happen.

              Because  instance  domains  may vary over time, clients may need to use the variant
              routines pmLookupInDomArchive(3) or pmNameInDomArchive(3) to manipulate  the  union
              of the instances in an instance domain over the life of an archive.

       PM_ERR_LOGOVERLAP
              Archives overlap in time
              When using a context associated with a set of archives, the archives in the set may
              not overlap in time.

       PM_ERR_LOGHOST
              Archives differ by host
              When using a context associated with a set of archives, the  archives  in  the  set
              must all have been generated on the same host.

       PM_ERR_LOGCHANGETYPE
              The type of a metric differs among archives
              When  using  a  context  associated with a set of archives, the type of each metric
              must be same in all of the archives.

       PM_ERR_LOGCHANGESEM
              The semantics of a metric differs among archives
              When using a context associated with a set  of  archives,  the  semantics  of  each
              metric must be same in all of the archives.

       PM_ERR_LOGCHANGEINDOM
              The instance domain of a metric differs among archives
              When using a context associated with a set of archives, the instance domain of each
              metric must be same in all of the archives.

       PM_ERR_LOGCHANGEUNITS
              The units of a metric differs among archives
              When using a context associated with a set of archives, the units  of  each  metric
              must be same in all of the archives.

TIME CONTROL ERRORS

       These  errors  may occur in the interactions between a GUI PCP client and the time control
       services provided by pmtime(1).

       PM_ERR_ISCONN
              Already Connected
              A PCP client application  called  pmTimeConnect(3)  when  already  connected  to  a
              pmtime(1) instance.

       PM_ERR_NOTCONN
              Not Connected
              A  PCP  client  application called one of the time control routines pmTime*(3) when
              not currently connected to any pmtime(1) instance.

       PM_ERR_NEEDPORT
              A non-null port name is required
              If  a  shared  pmtime(1)  instance  is  being  created   the   port   argument   to
              pmTimeConnect(3) must not be invalid.

NAMESPACE ERRORS

       These  errors  may  occur in the processing of PCP namespace operations.  A PCP namespace,
       see PMNS(5), provides the external names and the internal identifiers  for  the  available
       performance metrics.

       PM_ERR_NONLEAF
              Metric name is not a leaf in PMNS
              The  metric  name  passed  to  pmLookupName(3)  names  a  non-terminal  path in the
              namespace, i.e. a group of metrics rather than a single metric.

       PM_ERR_DUPPMNS
              Attempt to reload the PMNS
              When  using  an  explicit  local  namespace,  it  is  illegal  to  call  either  of
              pmLoadNameSpace(3) or pmLoadASCIINameSpace(3) more than once.

       PM_ERR_PMNS
              Problems parsing PMNS definitions
              Only occurs when an ASCII namespace is explicitly loaded.

       PM_ERR_NOPMNS
              PMNS not accessible
              Only occurs when an ASCII namespace is explicitly loaded.

PMCD-PMDA ERRORS

       These  error codes are used in the interactions between pmcd(1) and the PMDAs that provide
       the performance data.

       PM_ERR_PMDANOTREADY
              PMDA is not yet ready to respond to requests
              Some PMDAs have long initialization or reset times, and  will  respond  to  pmcd(1)
              with  this  error  if  they  are  busy  at  the  moment.   This error translates to
              PM_ERR_AGAIN for the PCP client who made the  request  to  pmcd  which  caused  the
              initial  request  to  the  PMDA.  At some later time the PMDA will inform pmcd (see
              PM_ERR_PMDAREADY) that it is now ready to process  requests,  and  client  requests
              will begin to succeed.

       PM_ERR_PMDAREADY
              PMDA is now responsive to requests
              Used  by PMDAs to asynchronously inform pmcd(1) that they are now willing to resume
              processing requests.  See also PM_ERR_PMDANOTREADY.

PCP ENVIRONMENT

       Environment variables with the prefix PCP_ are used to parameterize the file and directory
       names used by PCP.  On each installation, the file /etc/pcp.conf contains the local values
       for these variables.  The $PCP_CONF  variable  may  be  used  to  specify  an  alternative
       configuration  file,  as  described  in  pcp.conf(5).   Values  for these variables may be
       obtained programmatically using the pmGetConfig(3) function.

SEE ALSO

       PCPIntro(1), pmcd(1), pmerr(1), pminfo(1), pmtime(1), pmstore(1),  pmlogger(1),  PMAPI(3),
       pmAddProfile(3),  pmDelProfile(3),  pmConvScale(3),  pmNewContext(3), pmDestroyContext(3),
       pmErrStr(3),    pmExtractValue(3),    pmFetch(3),    pmFetchArchive(3),    pmGetConfig(3),
       pmGetInDom(3),       pmGetInDomArchive(3),      pmLoadNameSpace(3),      pmLookupInDom(3),
       pmLookupInDomText(3),       pmLookupName(3),       pmLookupText(3),        pmNameInDom(3),
       pmNameInDomArchive(3), pmSetMode(3), pmStore(3), pmTimeConnect(3), pcp.conf(5), pcp.env(5)
       and PMNS(5).