Provided by: libpdf-builder-perl_3.023-2_all 
NAME
PDF::Builder::Content::Text - additional specialized text-related formatting methods.
Inherits from PDF::Builder::Content
Note: If you have used some of these methods in PDF::API2 with a graphics type object
(e.g., $page->gfx()->method()), you may have to change to a text type object (e.g.,
$page->text()->method()).
METHODS
$width = $content->text_left($text, %opts)
$width = $content->text_left($text)
Alias for "text". Implemented for symmetry, for those who use a lot of "text_center"
and "text_right", and desire a "text_left".
Adds text to the page (left justified). Note that there is no maximum width, and
nothing to keep you from overflowing the physical page on the right! The width used
(in points) is returned.
$width = $content->text_center($text, %opts)
$width = $content->text_center($text)
As "text", but centered on the current point.
Adds text to the page (centered). The width used (in points) is returned.
$width = $content->text_right($text, %opts)
$width = $content->text_right($text)
As "text", but right-aligned to the current point.
Adds text to the page (right justified). Note that there is no maximum width, and
nothing to keep you from overflowing the physical page on the left! The width used
(in points) is returned.
$width = $content->text_justified($text, $width, %opts)
$width = $content->text_justified($text, $width)
As "text", but stretches text (using "wordspace", "charspace", and (as a last resort)
"hscale") to fill the desired (available) $width. Note that if the desired width is
less than the natural width taken by the text, it will be condensed to fit, using the
same three routines.
The unchanged $width is returned, unless there was some reason to change it (e.g.,
overflow).
Options:
-nocs => value
If this option value is 1 (default 0), do not use any intercharacter spacing. This
is useful for connected characters, such as fonts for Arabic, Devanagari, Latin
cursive handwriting, etc. You don't want to add additional space between
characters during justification, which would disconnect them.
Word (interword) spacing values (explicit or default) are doubled if -nocs is 1.
This is to make up for the lack of added/subtracted intercharacter spacing.
-wordsp => value
The percentage of one space character (default 100) that is the maximum amount to
add to (each) interword spacing to expand the line. If "-nocs" is 1, double
"value".
-charsp => value
If adding interword space didn't do enough, the percentage of one em (default 100)
that is the maximum amount to add to (each) intercharacter spacing to further
expand the line. If "-nocs" is 1, force "value" to 0.
-wordspa => value
If adding intercharacter space didn't do enough, the percentage of one space
character (default 100) that is the maximum additional amount to add to (each)
interword spacing to further expand the line. If "-nocs" is 1, double "value".
-charspa => value
If adding more interword space didn't do enough, the percentage of one em (default
100) that is the maximum additional amount to add to (each) intercharacter spacing
to further expand the line. If "-nocs" is 1, force "value" to 0.
-condw => value
The percentage of one space character (default 25) that is the maximum amount to
subtract from (each) interword spacing to condense the line. If "-nocs" is 1,
double "value".
-condc => value
If removing interword space didn't do enough, the percentage of one em (default
10) that is the maximum amount to subtract from (each) intercharacter spacing to
further condense the line. If "-nocs" is 1, force "value" to 0.
If expansion (or reduction) wordspace and charspace changes didn't do enough to make
the line fit the desired width, use "hscale()" to finish expanding or condensing the
line to fit.
Multiple Lines from a String
The string is split at regular blanks (spaces), x20, to find the longest substring that
will fit the $width. If a single word is longer than $width, it will overflow. To stay
strictly within the desired bounds, set the option "-spillover"=>0 to disallow spillover.
Hyphenation
If hyphenation is enabled, those methods which split up a string into multiple lines (the
"text fill", paragraph, and section methods) will attempt to split up the word that
overflows the line, in order to pack the text even more tightly ("greedy" line splitting).
There are a number of controls over where a word may be split, but note that there is
nothing language-specific (i.e., following a given language's rules for where a word may
be split). This is left to other packages.
There are hard coded minimums of 2 letters before the split, and 2 letters after the
split. See "Hyphenate_basic.pm". Note that neither hyphenation nor simple line splitting
makes any attempt to prevent widows and orphans, prevent splitting of the last word in a
column or page, or otherwise engage in paragraph shaping.
-hyphenate => value
0: no hyphenation (default), 1: do basic hyphenation. Always allows splitting at a
soft hyphen (\xAD). Unicode hyphen (U+2010) and non-splitting hyphen (U+2011) are
ignored as split points.
-spHH => value
0: do not split at a hard hyphen (x\2D), 1: OK to split (default)
-spOP => value
0: do not split after most punctuation, 1: OK to split (default)
-spDR => value
0: do not split after a run of one or more digits, 1: OK to split (default)
-spLR => value
0: do not split after a run of one or more ASCII letters, 1: OK to split (default)
-spCC => value
0: do not split in camelCase between a lowercase letter and an uppercase letter, 1: OK
to split (default)
Methods
($width, $leftover) = $content->text_fill_left($string, $width, %opts)
($width, $leftover) = $content->text_fill_left($string, $width)
Fill a line of 'width' with as much text as will fit, and outputs it left justified.
The width actually used, and the leftover text (that didn't fit), are returned.
($width, $leftover) = $content->text_fill($string, $width, %opts)
($width, $leftover) = $content->text_fill($string, $width)
Alias for text_fill_left().
($width, $leftover) = $content->text_fill_center($string, $width, %opts)
($width, $leftover) = $content->text_fill_center($string, $width)
Fill a line of 'width' with as much text as will fit, and outputs it centered. The
width actually used, and the leftover text (that didn't fit), are returned.
($width, $leftover) = $content->text_fill_right($string, $width, %opts)
($width, $leftover) = $content->text_fill_right($string, $width)
Fill a line of 'width' with as much text as will fit, and outputs it right justified.
The width actually used, and the leftover text (that didn't fit), are returned.
($width, $leftover) = $content->text_fill_justified($string, $width, %opts)
($width, $leftover) = $content->text_fill_justified($string, $width)
Fill a line of 'width' with as much text as will fit, and outputs it fully justified
(stretched or condensed). The width actually used, and the leftover text (that didn't
fit), are returned.
Note that the entire line is fit to the available width via a call to
"text_justified". See "text_justified" for options to control stretch and condense.
The last line is unjustified (normal size) and left aligned by default, although the
option
Options:
-last_align => place
where place is 'left' (default), 'center', or 'right' (may be shortened to first
letter) allows you to specify the alignment of the last line output.
($overflow_text, $unused_height) = $txt->paragraph($text, $width,$height, $continue,
%opts)
($overflow_text, $unused_height) = $txt->paragraph($text, $width,$height, $continue)
$overflow_text = $txt->paragraph($text, $width,$height, $continue, %opts)
$overflow_text = $txt->paragraph($text, $width,$height, $continue)
Print a single string into a rectangular area on the page, of given width and maximum
height. The baseline of the first (top) line is at the current text position.
Apply the text within the rectangle and return any leftover text (if could not fit all
of it within the rectangle). If called in an array context, the unused height is also
returned (may be 0 or negative if it just filled the rectangle).
If $continue is 1, the first line does not get special treatment for indenting or
outdenting, because we're printing the continuation of the paragraph that was
interrupted earlier. If it's 0, the first line may be indented or outdented.
Options:
-pndnt => $indent
Give the amount of indent (positive) or outdent (negative, for "hanging") for
paragraph first lines). This setting is ignored for centered text.
-align => $choice
$choice is 'justified', 'right', 'center', 'left'; the default is 'left'. See
"text_justified" call for options to control how a line is expanded or condensed
if $choice is 'justified'. $choice may be shortened to the first letter.
-last_align => place
where place is 'left' (default), 'center', or 'right' (may be shortened to first
letter) allows you to specify the alignment of the last line output, but applies
only when "-align" is 'justified'.
-underline => $distance
-underline => [ $distance, $thickness, ... ]
If a scalar, distance below baseline, else array reference with pairs of distance
and line thickness.
-spillover => $over
Controls if words in a line which exceed the given width should be "spilled over"
the bounds, or if a new line should be used for this word.
$over is 1 or 0, with the default 1 (spills over the width).
Example:
$txt->font($font,$fontsize);
$txt->leading($leading);
$txt->translate($x,$y);
$overflow = $txt->paragraph( 'long paragraph here ...',
$width,
$y+$leading-$bottom_margin );
Note: if you need to change any text treatment within a paragraph (bold or italicized
text, for instance), this can not handle it. Only plain text (all the same font, size,
etc.) can be typeset with "paragraph()". Also, there is currently very limited line
splitting (hyphenation) to better fit to a given width, and nothing is done for
"widows and orphans".
($overflow_text, $continue, $unused_height) = $txt->section($text, $width,$height,
$continue, %opts)
($overflow_text, $continue, $unused_height) = $txt->section($text, $width,$height,
$continue)
$overflow_text = $txt->section($text, $width,$height, $continue, %opts)
$overflow_text = $txt->section($text, $width,$height, $continue)
The $text contains a string with one or more paragraphs $width wide, starting at the
current text position, with a newline \n between each paragraph. Each paragraph is
output (see "paragraph") until the $height limit is met (a partial paragraph may be at
the bottom). Whatever wasn't output, will be returned. If called in an array context,
the unused height and the paragraph "continue" flag are also returned.
$continue is 0 for the first call of section(), and then use the value returned from
the previous call (1 if a paragraph was cut in the middle) to prevent unwanted
indenting or outdenting of the first line being printed.
For compatibility with recent changes to PDF::API2, paragraphs is accepted as an alias
for "section".
Options:
-pvgap => $vertical
Additional vertical space (unit: pt) between paragraphs (default 0). Note that
this space will also be added after the last paragraph printed.
See "paragraph" for other %opts you can use, such as -align and -pndnt.
$width = $txt->textlabel($x,$y, $font, $size, $text, %opts)
$width = $txt->textlabel($x,$y, $font, $size, $text)
Place a line of text at an arbitrary "[$x,$y]" on the page, with various text settings
(treatments) specified in the call.
$font
A previously created font.
$size
The font size (points).
$text
The text to be printed (a single line).
Options:
-rotate => $deg
Rotate $deg degrees counterclockwise from due East.
-color => $cspec
A color name or permitted spec, such as "#CCE840", for the character fill.
-strokecolor => $cspec
A color name or permitted spec, such as "#CCE840", for the character outline.
-charspace => $cdist
Additional distance between characters.
-wordspace => $wdist
Additional distance between words.
-hscale => $hfactor
Horizontal scaling mode (percentage of normal, default is 100).
-render => $mode
Character rendering mode (outline only, fill only, etc.). See "render" call.
-left => 1
Left align on the given point. This is the default.
-center => 1
Center the text on the given point.
-right => 1
Right align on the given point.
-align => $placement
Alternate to -left, -center, and -right. $placement is 'left' (default), 'center',
or 'right'.
Other options available to "text", such as underlining, can be used here.
The width used (in points) is returned.
Please note that "textlabel()" was not designed to interoperate with other text
operations. It is a standalone operation, and does not leave a "next write" position (or
any other setting) for another "text" mode operation. A following write will likely be at
"(0,0)", and not at the expected location.
"textlabel()" is intended as an "all in one" convenience function for single lines of
text, such as a label on some graphics, and not as part of putting down multiple pieces of
text. It is possible to figure out the position of a following write (either "textlabel"
or "text") by adding the returned width to the original position's x value (assuming left-
justified positioning).