Provided by: libpoe-component-client-ping-perl_1.177-1_all 
NAME
POE::Component::Client::Ping - a non-blocking ICMP ping client
SYNOPSIS
use POE qw(Component::Client::Ping);
POE::Component::Client::Ping->spawn(
Alias => "pingthing", # defaults to "pinger"
Timeout => 10, # defaults to 1 second
Retry => 3, # defaults to 1 attempt
OneReply => 1, # defaults to disabled
Parallelism => 64, # defaults to autodetect
BufferSize => 65536, # defaults to undef
AlwaysDecodeAddress => 1, # defaults to 0
);
sub some_event_handler {
$kernel->post(
"pingthing", # Post the request to the "pingthing" component.
"ping", # Ask it to "ping" an address.
"pong", # Have it post an answer as a "pong" event.
$address, # This is the address we want to ping.
$timeout, # Optional timeout. It overrides the default.
$retry, # Optional retries. It overrides the default.
);
}
# This is the sub which is called when the session receives a "pong"
# event. It handles responses from the Ping component.
sub got_pong {
my ($request, $response) = @_[ARG0, ARG1];
my ($req_address, $req_timeout, $req_time) = @$request;
my ($resp_address, $roundtrip_time, $resp_time, $resp_ttl) = @$response;
# The response address is defined if this is a response.
if (defined $resp_address) {
printf(
"ping to %-15.15s at %10d. pong from %-15.15s in %6.3f s\n",
$req_address, $req_time,
$resp_address, $roundtrip_time,
);
return;
}
# Otherwise the timeout period has ended.
printf(
"ping to %-15.15s is done.\n", $req_address,
);
}
or
use POE::Component::Client::Ping ":const";
# Post an array ref as the callback to get data back to you
$kernel->post("pinger", "ping", [ "pong", $user_data ]);
# use the REQ_USER_ARGS constant to get to your data
sub got_pong {
my ($request, $response) = @_[ARG0, ARG1];
my $user_data = $request->[REQ_USER_ARGS];
...;
}
DESCRIPTION
POE::Component::Client::Ping is non-blocking ICMP ping client. It lets several other
sessions ping through it in parallel, and it lets them continue doing other things while
they wait for responses.
Ping client components are not proper objects. Instead of being created, as most objects
are, they are "spawned" as separate sessions. To avoid confusion (and hopefully not cause
other confusion), they must be spawned with a "spawn" method, not created anew with a
"new" one.
PoCo::Client::Ping's "spawn" method takes a few named parameters:
Alias => $session_alias
"Alias" sets the component's alias. It is the target of post() calls. See the
synopsis. The alias defaults to "pinger".
Socket => $raw_socket
"Socket" allows developers to open an existing raw socket rather than letting the
component attempt opening one itself. If omitted, the component will create its own raw
socket.
This is useful for people who would rather not perform a security audit on POE, since it
allows them to create a raw socket in their own code and then run POE at reduced
privileges.
Timeout => $ping_timeout
"Timeout" sets the default amount of time (in seconds) a Ping component will wait for a
single ICMP echo reply before retrying. It is 1 by default. It is possible and
meaningful to set the timeout to a fractional number of seconds.
This default timeout is only used for ping requests that don't include their own
timeouts.
Retry => $ping_attempts
"Retry" sets the default number of attempts a ping will be sent before it should be
considered failed. It is 1 by default.
OneReply => 0|1
Set "OneReply" to prevent the Ping component from waiting the full timeout period for
replies. Normally the ICMP protocol allows for multiple replies to a single request, so
it's proper to wait for late responses. This option disables the wait, ending the ping
transaction at the first response. Any subsequent responses will be silently ignored.
"OneReply" is disabled by default, and a single successful request will generate at
least two responses. The first response is a successful ICMP ECHO REPLY event. The
second is an undefined response event, signifying that the timeout period has ended.
A ping request will generate exactly one reply when "OneReply" is enabled. This reply
will represent either the first ICMP ECHO REPLY to arrive or that the timeout period has
ended.
Parallelism => $limit
Parallelism sets POE::Component::Client::Ping's maximum number of simultaneous ICMP
requests. Higher numbers speed up the processing of large host lists, up to the point
where the operating system or network becomes oversaturated and begin to drop packets.
The difference can be dramatic. A tuned Parallelism can enable responses down to 1ms,
depending on the network, although it will take longer to get through the hosts list.
Pinging 762 hosts at Parallelism=64
Starting to ping hosts.
Pinged 10.0.0.25 - Response from 10.0.0.25 in 0.002s
Pinged 10.0.0.200 - Response from 10.0.0.200 in 0.003s
Pinged 10.0.0.201 - Response from 10.0.0.201 in 0.001s
real 1m1.923s
user 0m2.584s
sys 0m0.207s
Responses will take significantly longer with an untuned Parallelism, but the total run
time will be quicker.
Pinging 762 hosts at Parallelism=500
Starting to ping hosts.
Pinged 10.0.0.25 - Response from 10.0.0.25 in 3.375s
Pinged 10.0.0.200 - Response from 10.0.0.200 in 1.258s
Pinged 10.0.0.201 - Response from 10.0.0.201 in 2.040s
real 0m13.410s
user 0m6.390s
sys 0m0.290s
Excessively high parallelism values may saturate the OS or network, resulting in few or
no responses.
Pinging 762 hosts at Parallelism=1000
Starting to ping hosts.
real 0m20.520s
user 0m7.896s
sys 0m0.297s
By default, POE::Component::Client::Ping will guess at an optimal Parallelism value
based on the raw socket receive buffer size and the operating system's nominal ICMP
packet size. The latter figure is 3000 octets for Linux and 100 octets for other
systems. ICMP packets are generally under 90 bytes, but operating systems may use
alternative numbers when calculating buffer capacities. The component tries to mimic
calculations observed in the wild.
When in doubt, experiment with different Parallelism values and use the one that works
best.
BufferSize => $bytes
If set, then the size of the receive buffer of the raw socket will be modified to the
given value. The default size of the receive buffer is operating system dependent. If
the buffer cannot be set to the given value, a warning will be generated but the system
will continue working. Note that if the buffer is set too small and too many ping
replies arrive at the same time, then the operating system may discard the ping replies
and mistakenly cause this component to believe the ping to have timed out. In this case,
you will typically see discards being noted in the counters displayed by 'netstat -s'.
Increased BufferSize values can expand the practical limit for Parallelism.
AlwaysDecodeAddress => 0|1
If set, then any input addresses will always be looked up, even if the hostname happens
to be only 4 characters in size. Ideally, you should be passing addresses in to the
system to avoid slow hostname lookups, but if you must use hostnames and there is a
possibility that you might have short hostnames, then you should set this.
Payload => $bytes
Sets the ICMP payload (data bytes). Otherwise the component generates 56 data bytes
internally. Note that some firewalls will discard ICMP packets with nonstandard payload
sizes.
Sessions communicate asynchronously with the Client::Ping component. They post ping
requests to it, and they receive pong events back.
Requests are posted to the component's "ping" handler. They include the name of an event
to post back, an address to ping, and an optional amount of time to wait for responses.
The address may be a numeric dotted quad, a packed inet_aton address, or a host name.
Host names are not recommended: they must be looked up for every ping request, and DNS
lookups can be very slow. The optional timeout overrides the one set when "spawn" is
called.
Ping responses come with two array references:
my ($request, $response) = @_[ARG0, ARG1];
$request contains information about the original request:
my (
$req_address, $req_timeout, $req_time, $req_user_args,
) = @$request;
$req_address
This is the original request address. It matches the address posted along with the
original "ping" request.
It is useful along with $req_user_args for pairing requests with their corresponding
responses.
$req_timeout
This is the original request timeout. It's either the one passed with the "ping"
request or the default timeout set with "spawn".
$req_time
This is the time that the "ping" event was received by the Ping component. It is a real
number based on the current system's time() epoch.
$req_user_args
This is a scalar containing arbitrary data that can be sent along with a request. It's
often used to provide continuity between requests and their responses. $req_user_args
may contain a reference to some larger data structure.
To use it, replace the response event with an array reference in the original request.
The array reference should contain two items: the actual response event and a scalar
with the context data the program needs back. See the SYNOPSIS for an example.
$response contains information about the ICMP ping response. There may be multiple
responses for a single request.
my ($response_address, $roundtrip_time, $reply_time, $reply_ttl) =
@$response;
$response_address
This is the address that responded to the ICMP echo request. It may be different than
$request_address, especially if the request was sent to a broadcast address.
$response_address will be undefined if $request_timeout seconds have elapsed. This
marks the end of responses for a given request. Programs can assume that no more
responses will be sent for the request address. They may use this marker to initiate
another ping request.
$roundtrip_time
This is the number of seconds that elapsed between the ICMP echo request's transmission
and its corresponding response's receipt. It's a real number. This is purely the trip
time and does *not* include any time spent queueing if the system's parallelism limit
caused the ping transmission to be delayed.
$reply_time
This is the time when the ICMP echo response was received. It is a real number based on
the current system's time() epoch.
$reply_ttl
This is the ttl for the echo response packet we received.
If the ":const" tagset is imported the following constants will be exported:
REQ_ADDRESS, REQ_TIMEOUT, REQ_TIME REQ_USER_ARGS, RES_ADDRESS, RES_ROUNDTRIP, RES_TIME,
RES_TTL
SEE ALSO
This component's ICMP ping code was lifted from Net::Ping, which is an excellent module
when you only need to ping one host at a time.
See POE, of course, which includes a lot of documentation about how POE works.
Also see the test program, t/01_ping.t, in the component's distribution.
BUG TRACKER
https://rt.cpan.org/Dist/Display.html?Queue=POE-Component-Client-Ping
REPOSITORY
http://github.com/rcaputo/poe-component-client-ping/
OTHER RESOURCES
http://search.cpan.org/dist/POE-Component-Client-Ping/
AUTHOR & COPYRIGHTS
POE::Component::Client::Ping is Copyright 1999-2020 by Rocco Caputo. All rights are
reserved. POE::Component::Client::Ping is free software; you may redistribute it and/or
modify it under the same terms as Perl itself.
You can learn more about POE at http://poe.perl.org/