Provided by: erlang-manpages_24.3.4.1+dfsg-1_all 
NAME
disk_log - A disk-based term logging facility.
DESCRIPTION
disk_log is a disk-based term logger that enables efficient logging of items on files.
Two types of logs are supported:
halt logs:
Appends items to a single file, which size can be limited by the disk_log module.
wrap logs:
Uses a sequence of wrap log files of limited size. As a wrap log file is filled up,
further items are logged on to the next file in the sequence, starting all over with
the first file when the last file is filled up.
For efficiency reasons, items are always written to files as binaries.
Two formats of the log files are supported:
internal format:
Supports automatic repair of log files that are not properly closed and enables
efficient reading of logged items in chunks using a set of functions defined in this
module. This is the only way to read internally formatted logs. An item logged to an
internally formatted log must not occupy more than 4 GB of disk space (the size must
fit in 4 bytes).
external format:
Leaves it up to the user to read and interpret the logged data. The disk_log module
cannot repair externally formatted logs.
For each open disk log, one process handles requests made to the disk log. This process is
created when open/1 is called, provided there exists no process handling the disk log. A
process that opens a disk log can be an owner or an anonymous user of the disk log. Each
owner is linked to the disk log process, and an owner can close the disk log either
explicitly (by calling close/1 or lclose/1,2) or by terminating.
Owners can subscribe to notifications, messages of the form {disk_log, Node, Log, Info},
which are sent from the disk log process when certain events occur, see the functions and
in particular the open/1 option notify. A log can have many owners, but a process cannot
own a log more than once. However, the same process can open the log as a user more than
once.
For a disk log process to close its file properly and terminate, it must be closed by its
owners and once by some non-owner process for each time the log was used anonymously. The
users are counted and there must not be any users left when the disk log process
terminates.
Items can be logged synchronously by using functions log/2, blog/2, log_terms/2, and
blog_terms/2. For each of these functions, the caller is put on hold until the items are
logged (but not necessarily written, use sync/1 to ensure that). By adding an a to each of
the mentioned function names, we get functions that log items asynchronously. Asynchronous
functions do not wait for the disk log process to write the items to the file, but return
the control to the caller more or less immediately.
When using the internal format for logs, use functions log/2, log_terms/2, alog/2, and
alog_terms/2. These functions log one or more Erlang terms. By prefixing each of the
functions with a b (for "binary"), we get the corresponding blog() functions for the
external format. These functions log one or more chunks of bytes. For example, to log the
string "hello" in ASCII format, you can use disk_log:blog(Log, "hello"), or
disk_log:blog(Log, list_to_binary("hello")). The two alternatives are equally efficient.
The blog() functions can also be used for internally formatted logs, but in this case they
must be called with binaries constructed with calls to term_to_binary/1. There is no check
to ensure this, it is entirely the responsibility of the caller. If these functions are
called with binaries that do not correspond to Erlang terms, the chunk/2,3 and automatic
repair functions fail. The corresponding terms (not the binaries) are returned when
chunk/2,3 is called.
An open disk log is only accessible from the node where the disk log process runs. All
processes on the node where the disk log process runs can log items or otherwise change,
inspect, or close the log.
Errors are reported differently for asynchronous log attempts and other uses of the
disk_log module. When used synchronously, this module replies with an error message, but
when called asynchronously, this module does not know where to send the error message.
Instead, owners subscribing to notifications receive an error_status message.
The disk_log module does not report errors to the error_logger module. It is up to the
caller to decide whether to employ the error logger. Function format_error/1 can be used
to produce readable messages from error replies. However, information events are sent to
the error logger in two situations, namely when a log is repaired, or when a file is
missing while reading chunks.
Error message no_such_log means that the specified disk log is not open. Nothing is said
about whether the disk log files exist or not.
Note:
If an attempt to reopen or truncate a log fails (see reopen/2,3 and truncate/1,2) the disk
log process terminates immediately. Before the process terminates, links to owners and
blocking processes (see block/1,2) are removed. The effect is that the links work in one
direction only. Any process using a disk log must check for error message no_such_log if
some other process truncates or reopens the log simultaneously.
DATA TYPES
log() = term()
dlog_size() =
infinity |
integer() >= 1 |
{MaxNoBytes :: integer() >= 1, MaxNoFiles :: integer() >= 1}
dlog_format() = external | internal
dlog_head_opt() = none | term() | iodata()
dlog_mode() = read_only | read_write
dlog_type() = halt | wrap
continuation()
Chunk continuation returned by chunk/2,3, bchunk/2,3, or chunk_step/3.
invalid_header() = term()
file_error() = term()
EXPORTS
all() -> [Log]
Types:
Log = log()
Returns the names of the disk logs accessible on the current node.
accessible_logs() -> {[Log], []}
Types:
Log = log()
Returns the names of the disk logs accessible on the current node. The first list
contains the logs. The second list is always empty (before Erlang/OTP 24.0 it used
to contain so called distributed disk logs).
Note:
This function is deprecated. Use all/0 instead.
alog(Log, Term) -> notify_ret()
balog(Log, Bytes) -> notify_ret()
Types:
Log = log()
Term = term()
Bytes = iodata()
notify_ret() = ok | {error, no_such_log}
Asynchronously append an item to a disk log. alog/2 is used for internally
formatted logs and balog/2 for externally formatted logs. balog/2 can also be used
for internally formatted logs if the binary is constructed with a call to
term_to_binary/1.
Owners subscribing to notifications receive message read_only, blocked_log, or
format_external if the item cannot be written on the log, and possibly one of the
messages wrap, full, or error_status if an item is written on the log. Message
error_status is sent if something is wrong with the header function or if a file
error occurs.
alog_terms(Log, TermList) -> notify_ret()
balog_terms(Log, ByteList) -> notify_ret()
Types:
Log = log()
TermList = [term()]
ByteList = [iodata()]
notify_ret() = ok | {error, no_such_log}
Asynchronously append a list of items to a disk log. alog_terms/2 is used for
internally formatted logs and balog_terms/2 for externally formatted logs.
balog_terms/2 can also be used for internally formatted logs if the binaries are
constructed with calls to term_to_binary/1.
Owners subscribing to notifications receive message read_only, blocked_log, or
format_external if the items cannot be written on the log, and possibly one or more
of the messages wrap, full, and error_status if items are written on the log.
Message error_status is sent if something is wrong with the header function or if a
file error occurs.
block(Log) -> ok | {error, block_error_rsn()}
block(Log, QueueLogRecords) -> ok | {error, block_error_rsn()}
Types:
Log = log()
QueueLogRecords = boolean()
block_error_rsn() = no_such_log | nonode | {blocked_log, log()}
With a call to block/1,2 a process can block a log. If the blocking process is not
an owner of the log, a temporary link is created between the disk log process and
the blocking process. The link ensures that the disk log is unblocked if the
blocking process terminates without first closing or unblocking the log.
Any process can probe a blocked log with info/1 or close it with close/1. The
blocking process can also use functions chunk/2,3, bchunk/2,3, chunk_step/3, and
unblock/1 without being affected by the block. Any other attempt than those
mentioned so far to update or read a blocked log suspends the calling process until
the log is unblocked or returns error message {blocked_log, Log}, depending on
whether the value of QueueLogRecords is true or false. QueueLogRecords defaults to
true, which is used by block/1.
change_header(Log, Header) -> ok | {error, Reason}
Types:
Log = log()
Header =
{head, dlog_head_opt()} |
{head_func, MFA :: {atom(), atom(), list()}}
Reason =
no_such_log | nonode |
{read_only_mode, Log} |
{blocked_log, Log} |
{badarg, head}
Changes the value of option head or head_func for an owner of a disk log.
change_notify(Log, Owner, Notify) -> ok | {error, Reason}
Types:
Log = log()
Owner = pid()
Notify = boolean()
Reason =
no_such_log | nonode |
{blocked_log, Log} |
{badarg, notify} |
{not_owner, Owner}
Changes the value of option notify for an owner of a disk log.
change_size(Log, Size) -> ok | {error, Reason}
Types:
Log = log()
Size = dlog_size()
Reason =
no_such_log | nonode |
{read_only_mode, Log} |
{blocked_log, Log} |
{new_size_too_small, Log, CurrentSize :: integer() >= 1} |
{badarg, size} |
{file_error, file:filename(), file_error()}
Changes the size of an open log. For a halt log, the size can always be increased,
but it cannot be decreased to something less than the current file size.
For a wrap log, both the size and the number of files can always be increased, as
long as the number of files does not exceed 65000. If the maximum number of files
is decreased, the change is not valid until the current file is full and the log
wraps to the next file. The redundant files are removed the next time the log wraps
around, that is, starts to log to file number 1.
As an example, assume that the old maximum number of files is 10 and that the new
maximum number of files is 6. If the current file number is not greater than the
new maximum number of files, files 7-10 are removed when file 6 is full and the log
starts to write to file number 1 again. Otherwise, the files greater than the
current file are removed when the current file is full (for example, if the current
file is 8, files 9 and 10 are removed). The files between the new maximum number of
files and the current file (that is, files 7 and 8) are removed the next time file
6 is full.
If the size of the files is decreased, the change immediately affects the current
log. It does not change the size of log files already full until the next time they
are used.
If the log size is decreased, for example, to save space, function inc_wrap_file/1
can be used to force the log to wrap.
chunk(Log, Continuation) -> chunk_ret()
chunk(Log, Continuation, N) -> chunk_ret()
bchunk(Log, Continuation) -> bchunk_ret()
bchunk(Log, Continuation, N) -> bchunk_ret()
Types:
Log = log()
Continuation = start | continuation()
N = integer() >= 1 | infinity
chunk_ret() =
{Continuation2 :: continuation(), Terms :: [term()]} |
{Continuation2 :: continuation(),
Terms :: [term()],
Badbytes :: integer() >= 0} |
eof |
{error, Reason :: chunk_error_rsn()}
bchunk_ret() =
{Continuation2 :: continuation(), Binaries :: [binary()]} |
{Continuation2 :: continuation(),
Binaries :: [binary()],
Badbytes :: integer() >= 0} |
eof |
{error, Reason :: chunk_error_rsn()}
chunk_error_rsn() =
no_such_log |
{format_external, log()} |
{blocked_log, log()} |
{badarg, continuation} |
{not_internal_wrap, log()} |
{corrupt_log_file, FileName :: file:filename()} |
{file_error, file:filename(), file_error()}
Efficiently reads the terms that are appended to an internally formatted log. It
minimizes disk I/O by reading 64 kilobyte chunks from the file. Functions
bchunk/2,3 return the binaries read from the file, they do not call
binary_to_term(). Apart from that, they work just like chunk/2,3.
The first time chunk() (or bchunk()) is called, an initial continuation, the atom
start, must be provided.
When chunk/3 is called, N controls the maximum number of terms that are read from
the log in each chunk. Defaults to infinity, which means that all the terms
contained in the 64 kilobyte chunk are read. If less than N terms are returned,
this does not necessarily mean that the end of the file is reached.
chunk() returns a tuple {Continuation2, Terms}, where Terms is a list of terms
found in the log. Continuation2 is yet another continuation, which must be passed
on to any subsequent calls to chunk(). With a series of calls to chunk(), all terms
from a log can be extracted.
chunk() returns a tuple {Continuation2, Terms, Badbytes} if the log is opened in
read-only mode and the read chunk is corrupt. Badbytes is the number of bytes in
the file found not to be Erlang terms in the chunk. Notice that the log is not
repaired. When trying to read chunks from a log opened in read-write mode, tuple
{corrupt_log_file, FileName} is returned if the read chunk is corrupt.
chunk() returns eof when the end of the log is reached, or {error, Reason} if an
error occurs. If a wrap log file is missing, a message is output on the error log.
When chunk/2,3 is used with wrap logs, the returned continuation might not be valid
in the next call to chunk(). This is because the log can wrap and delete the file
into which the continuation points. To prevent this, the log can be blocked during
the search.
chunk_info(Continuation) -> InfoList | {error, Reason}
Types:
Continuation = continuation()
InfoList = [{node, Node :: node()}, ...]
Reason = {no_continuation, Continuation}
Returns the pair {node, Node}, describing the chunk continuation returned by
chunk/2,3, bchunk/2,3, or chunk_step/3.
Terms are read from the disk log running on Node.
chunk_step(Log, Continuation, Step) ->
{ok, any()} | {error, Reason}
Types:
Log = log()
Continuation = start | continuation()
Step = integer()
Reason =
no_such_log | end_of_log |
{format_external, Log} |
{blocked_log, Log} |
{badarg, continuation} |
{file_error, file:filename(), file_error()}
Can be used with chunk/2,3 and bchunk/2,3 to search through an internally formatted
wrap log. It takes as argument a continuation as returned by chunk/2,3, bchunk/2,3,
or chunk_step/3, and steps forward (or backward) Step files in the wrap log. The
continuation returned, points to the first log item in the new current file.
If atom start is specified as continuation, the first file of the wrap log is
chosen as the new current file.
If the wrap log is not full because all files are not yet used, {error, end_of_log}
is returned if trying to step outside the log.
close(Log) -> ok | {error, close_error_rsn()}
Types:
Log = log()
close_error_rsn() =
no_such_log | nonode |
{file_error, file:filename(), file_error()}
Closes a disk log properly. An internally formatted log must be closed before the
Erlang system is stopped. Otherwise, the log is regarded as unclosed and the
automatic repair procedure is activated next time the log is opened.
The disk log process is not terminated as long as there are owners or users of the
log. All owners must close the log, possibly by terminating. Also, any other
process, not only the processes that have opened the log anonymously, can decrement
the users counter by closing the log. Attempts to close a log by a process that is
not an owner are ignored if there are no users.
If the log is blocked by the closing process, the log is also unblocked.
format_error(Error) -> io_lib:chars()
Types:
Error = term()
Given the error returned by any function in this module, this function returns a
descriptive string of the error in English. For file errors, function
format_error/1 in module file is called.
inc_wrap_file(Log) -> ok | {error, inc_wrap_error_rsn()}
Types:
Log = log()
inc_wrap_error_rsn() =
no_such_log | nonode |
{read_only_mode, log()} |
{blocked_log, log()} |
{halt_log, log()} |
{invalid_header, invalid_header()} |
{file_error, file:filename(), file_error()}
invalid_header() = term()
Forces the internally formatted disk log to start logging to the next log file. It
can be used, for example, with change_size/2 to reduce the amount of disk space
allocated by the disk log.
Owners subscribing to notifications normally receive a wrap message, but if an
error occurs with a reason tag of invalid_header or file_error, an error_status
message is sent.
info(Log) -> InfoList | {error, no_such_log}
Types:
Log = log()
InfoList = [dlog_info()]
dlog_info() =
{name, Log :: log()} |
{file, File :: file:filename()} |
{type, Type :: dlog_type()} |
{format, Format :: dlog_format()} |
{size, Size :: dlog_size()} |
{mode, Mode :: dlog_mode()} |
{owners, [{pid(), Notify :: boolean()}]} |
{users, Users :: integer() >= 0} |
{status,
Status :: ok | {blocked, QueueLogRecords :: boolean()}} |
{node, Node :: node()} |
{head,
Head ::
none |
{head, binary()} |
(MFA :: {atom(), atom(), list()})} |
{no_written_items, NoWrittenItems :: integer() >= 0} |
{full, Full :: boolean} |
{no_current_bytes, integer() >= 0} |
{no_current_items, integer() >= 0} |
{no_items, integer() >= 0} |
{current_file, integer() >= 1} |
{no_overflows,
{SinceLogWasOpened :: integer() >= 0,
SinceLastInfo :: integer() >= 0}}
Returns a list of {Tag, Value} pairs describing a log running on the node.
The following pairs are returned for all logs:
{name, Log}:
Log is the log name as specified by the open/1 option name.
{file, File}:
For halt logs File is the filename, and for wrap logs File is the base name.
{type, Type}:
Type is the log type as specified by the open/1 option type.
{format, Format}:
Format is the log format as specified by the open/1 option format.
{size, Size}:
Size is the log size as specified by the open/1 option size, or the size set by
change_size/2. The value set by change_size/2 is reflected immediately.
{mode, Mode}:
Mode is the log mode as specified by the open/1 option mode.
{owners, [{pid(), Notify}]}:
Notify is the value set by the open/1 option notify or function change_notify/3
for the owners of the log.
{users, Users}:
Users is the number of anonymous users of the log, see the open/1 option
linkto.
{status, Status}:
Status is ok or {blocked, QueueLogRecords} as set by functions block/1,2 and
unblock/1.
{node, Node}:
The information returned by the current invocation of function info/1 is
gathered from the disk log process running on Node.
The following pairs are returned for all logs opened in read_write mode:
{head, Head}:
Depending on the value of the open/1 options head and head_func, or set by
function change_header/2, the value of Head is none (default), {head, H} (head
option), or {M,F,A} (head_func option).
{no_written_items, NoWrittenItems}:
NoWrittenItems is the number of items written to the log since the disk log
process was created.
The following pair is returned for halt logs opened in read_write mode:
{full, Full}:
Full is true or false depending on whether the halt log is full or not.
The following pairs are returned for wrap logs opened in read_write mode:
{no_current_bytes, integer() >= 0}:
The number of bytes written to the current wrap log file.
{no_current_items, integer() >= 0}:
The number of items written to the current wrap log file, header inclusive.
{no_items, integer() >= 0}:
The total number of items in all wrap log files.
{current_file, integer()}:
The ordinal for the current wrap log file in the range 1..MaxNoFiles, where
MaxNoFiles is specified by the open/1 option size or set by change_size/2.
{no_overflows, {SinceLogWasOpened, SinceLastInfo}}:
SinceLogWasOpened (SinceLastInfo) is the number of times a wrap log file has
been filled up and a new one is opened or inc_wrap_file/1 has been called since
the disk log was last opened (info/1 was last called). The first time info/2 is
called after a log was (re)opened or truncated, the two values are equal.
Notice that functions chunk/2,3, bchunk/2,3, and chunk_step/3 do not affect any
value returned by info/1.
lclose(Log) -> ok | {error, lclose_error_rsn()}
lclose(Log, Node) -> ok | {error, lclose_error_rsn()}
Types:
Log = log()
Node = node()
lclose_error_rsn() =
no_such_log | {file_error, file:filename(), file_error()}
lclose/1 closes a disk log on the current node.
lclose/2 closes a disk log on the current node if Node is the current node.
lclose(Log) is equivalent to lclose(Log, node()). See also close/1.
If no log with the specified name exist on the current node, no_such_log is
returned.
Note:
These functions are deprecated. Use close/1 instead.
log(Log, Term) -> ok | {error, Reason :: log_error_rsn()}
blog(Log, Bytes) -> ok | {error, Reason :: log_error_rsn()}
Types:
Log = log()
Term = term()
Bytes = iodata()
log_error_rsn() =
no_such_log | nonode |
{read_only_mode, log()} |
{format_external, log()} |
{blocked_log, log()} |
{full, log()} |
{invalid_header, invalid_header()} |
{file_error, file:filename(), file_error()}
Synchronously appends a term to a disk log. Returns ok or {error, Reason} when the
term is written to disk. Terms are written by the ordinary write() function of the
operating system. Hence, it is not guaranteed that the term is written to disk, it
can linger in the operating system kernel for a while. To ensure that the item is
written to disk, function sync/1 must be called.
log/2 is used for internally formatted logs, and blog/2 for externally formatted
logs. blog/2 can also be used for internally formatted logs if the binary is
constructed with a call to term_to_binary/1.
Owners subscribing to notifications are notified of an error with an error_status
message if the error reason tag is invalid_header or file_error.
log_terms(Log, TermList) ->
ok | {error, Reason :: log_error_rsn()}
blog_terms(Log, BytesList) ->
ok | {error, Reason :: log_error_rsn()}
Types:
Log = log()
TermList = [term()]
BytesList = [iodata()]
log_error_rsn() =
no_such_log | nonode |
{read_only_mode, log()} |
{format_external, log()} |
{blocked_log, log()} |
{full, log()} |
{invalid_header, invalid_header()} |
{file_error, file:filename(), file_error()}
Synchronously appends a list of items to the log. It is more efficient to use these
functions instead of functions log/2 and blog/2. The specified list is split into
as large sublists as possible (limited by the size of wrap log files), and each
sublist is logged as one single item, which reduces the overhead.
log_terms/2 is used for internally formatted logs, and blog_terms/2 for externally
formatted logs. blog_terms/2 can also be used for internally formatted logs if the
binaries are constructed with calls to term_to_binary/1.
Owners subscribing to notifications are notified of an error with an error_status
message if the error reason tag is invalid_header or file_error.
open(ArgL) -> open_ret()
Types:
ArgL = dlog_options()
dlog_options() = [dlog_option()]
dlog_option() =
{name, Log :: log()} |
{file, FileName :: file:filename()} |
{linkto, LinkTo :: none | pid()} |
{repair, Repair :: true | false | truncate} |
{type, Type :: dlog_type()} |
{format, Format :: dlog_format()} |
{size, Size :: dlog_size()} |
{notify, boolean()} |
{head, Head :: dlog_head_opt()} |
{head_func, MFA :: {atom(), atom(), list()}} |
{quiet, boolean()} |
{mode, Mode :: dlog_mode()}
open_ret() =
{ok, Log :: log()} |
{repaired,
Log :: log(),
{recovered, Rec :: integer() >= 0},
{badbytes, Bad :: integer() >= 0}} |
{error, open_error_rsn()}
open_error_rsn() =
no_such_log |
{badarg, term()} |
{size_mismatch,
CurrentSize :: dlog_size(),
NewSize :: dlog_size()} |
{arg_mismatch,
OptionName :: dlog_optattr(),
CurrentValue :: term(),
Value :: term()} |
{name_already_open, Log :: log()} |
{open_read_write, Log :: log()} |
{open_read_only, Log :: log()} |
{need_repair, Log :: log()} |
{not_a_log_file, FileName :: file:filename()} |
{invalid_index_file, FileName :: file:filename()} |
{invalid_header, invalid_header()} |
{file_error, file:filename(), file_error()} |
{node_already_open, Log :: log()}
dlog_optattr() =
name | file | linkto | repair | type | format | size |
notify | head | head_func | mode
dlog_size() =
infinity |
integer() >= 1 |
{MaxNoBytes :: integer() >= 1, MaxNoFiles :: integer() >= 1}
Parameter ArgL is a list of the following options:
{name, Log}:
Specifies the log name. This name must be passed on as a parameter in all
subsequent logging operations. A name must always be supplied.
{file, FileName}:
Specifies the name of the file to be used for logged terms. If this value is
omitted and the log name is an atom or a string, the filename defaults to
lists:concat([Log, ".LOG"]) for halt logs.
For wrap logs, this is the base name of the files. Each file in a wrap log is
called <base_name>.N, where N is an integer. Each wrap log also has two files
called <base_name>.idx and <base_name>.siz.
{linkto, LinkTo}:
If LinkTo is a pid, it becomes an owner of the log. If LinkTo is none, the log
records that it is used anonymously by some process by incrementing the users
counter. By default, the process that calls open/1 owns the log.
{repair, Repair}:
If Repair is true, the current log file is repaired, if needed. As the
restoration is initiated, a message is output on the error log. If false is
specified, no automatic repair is attempted. Instead, the tuple {error,
{need_repair, Log}} is returned if an attempt is made to open a corrupt log
file. If truncate is specified, the log file becomes truncated, creating an
empty log. Defaults to true, which has no effect on logs opened in read-only
mode.
{type, Type}:
The log type. Defaults to halt.
{format, Format}:
Disk log format. Defaults to internal.
{size, Size}:
Log size.
When a halt log has reached its maximum size, all attempts to log more items
are rejected. Defaults to infinity, which for halt implies that there is no
maximum size.
For wrap logs, parameter Size can be a pair {MaxNoBytes, MaxNoFiles} or
infinity. In the latter case, if the files of an existing wrap log with the
same name can be found, the size is read from the existing wrap log, otherwise
an error is returned.
Wrap logs write at most MaxNoBytes bytes on each file and use MaxNoFiles files
before starting all over with the first wrap log file. Regardless of
MaxNoBytes, at least the header (if there is one) and one item are written on
each wrap log file before wrapping to the next file.
The first time an existing wrap log is opened, that is, when the disk log
process is created, the value of the option size is allowed to differ from the
current log size, and the size of the disk log is changed as per change_size/2.
When opening an existing wrap log, it is not necessary to supply a value for
option size, but if the log is already open, that is, the disk log process
exists, the supplied value must equal the current log size, otherwise the tuple
{error, {size_mismatch, CurrentSize, NewSize}} is returned.
Note:
Before Erlang/OTP 24.0, the supplied value of option size was to be equal to the
current log size when opening an existing wrap log for the first time, that is,
when creating the disk log process.
When opening an already open halt log, option size is ignored.
{notify, boolean()}:
If true, the log owners are notified when certain log events occur. Defaults to
false. The owners are sent one of the following messages when an event occurs:
{disk_log, Node, Log, {wrap, NoLostItems}}:
Sent when a wrap log has filled up one of its files and a new file is opened.
NoLostItems is the number of previously logged items that were lost when
truncating existing files.
{disk_log, Node, Log, {truncated, NoLostItems}}:
Sent when a log is truncated or reopened. For halt logs NoLostItems is the
number of items written on the log since the disk log process was created.
For wrap logs NoLostItems is the number of items on all wrap log files.
{disk_log, Node, Log, {read_only, Items}}:
Sent when an asynchronous log attempt is made to a log file opened in read-
only mode. Items is the items from the log attempt.
{disk_log, Node, Log, {blocked_log, Items}}:
Sent when an asynchronous log attempt is made to a blocked log that does not
queue log attempts. Items is the items from the log attempt.
{disk_log, Node, Log, {format_external, Items}}:
Sent when function alog/2 or alog_terms/2 is used for internally formatted
logs. Items is the items from the log attempt.
{disk_log, Node, Log, full}:
Sent when an attempt to log items to a wrap log would write more bytes than
the limit set by option size.
{disk_log, Node, Log, {error_status, Status}}:
Sent when the error status changes. The error status is defined by the
outcome of the last attempt to log items to the log, or to truncate the log,
or the last use of function sync/1, inc_wrap_file/1, or change_size/2. Status
is either ok or {error, Error}, the former is the initial value.
{head, Head}:
Specifies a header to be written first on the log file. If the log is a wrap
log, the item Head is written first in each new file. Head is to be a term if
the format is internal, otherwise an iodata(). Defaults to none, which means
that no header is written first on the file.
{head_func, {M,F,A}}:
Specifies a function to be called each time a new log file is opened. The call
M:F(A) is assumed to return {ok, Head}. The item Head is written first in each
file. Head is to be a term if the format is internal, otherwise an iodata().
{mode, Mode}:
Specifies if the log is to be opened in read-only or read-write mode. Defaults
to read_write.
{quiet, Boolean}:
Specifies if messages will be sent to error_logger on recoverable errors with
the log files. Defaults to false.
open/1 returns {ok, Log} if the log file is successfully opened. If the file is
successfully repaired, the tuple {repaired, Log, {recovered, Rec}, {badbytes, Bad}}
is returned, where Rec is the number of whole Erlang terms found in the file and
Bad is the number of bytes in the file that are non-Erlang terms.
When a disk log is opened in read-write mode, any existing log file is checked for.
If there is none, a new empty log is created, otherwise the existing file is opened
at the position after the last logged item, and the logging of items starts from
there. If the format is internal and the existing file is not recognized as an
internally formatted log, a tuple {error, {not_a_log_file, FileName}} is returned.
open/1 cannot be used for changing the values of options of an open log. When there
are prior owners or users of a log, all option values except name, linkto, and
notify are only checked against the values supplied before as option values to
function open/1, change_header/2, change_notify/3, or change_size/2. Thus, none of
the options except name is mandatory. If some specified value differs from the
current value, a tuple {error, {arg_mismatch, OptionName, CurrentValue, Value}} is
returned.
Note:
If an owner attempts to open a log as owner once again, it is acknowledged with the
return value {ok, Log}, but the state of the disk log is not affected.
A log file can be opened more than once by giving different values to option name
or by using the same file when opening a log on different nodes. It is up to the
user of module disk_log to ensure that not more than one disk log process has write
access to any file, otherwise the file can be corrupted.
If an attempt to open a log file for the first time fails, the disk log process
terminates with the EXIT message {{failed,Reason},[{disk_log,open,1}]}. The
function returns {error, Reason} for all other errors.
pid2name(Pid) -> {ok, Log} | undefined
Types:
Pid = pid()
Log = log()
Returns the log name given the pid of a disk log process on the current node, or
undefined if the specified pid is not a disk log process.
This function is meant to be used for debugging only.
reopen(Log, File) -> ok | {error, reopen_error_rsn()}
reopen(Log, File, Head) -> ok | {error, reopen_error_rsn()}
breopen(Log, File, BHead) -> ok | {error, reopen_error_rsn()}
Types:
Log = log()
File = file:filename()
Head = term()
BHead = iodata()
reopen_error_rsn() =
no_such_log | nonode |
{read_only_mode, log()} |
{blocked_log, log()} |
{same_file_name, log()} |
{invalid_index_file, file:filename()} |
{invalid_header, invalid_header()} |
{file_error, file:filename(), file_error()}
Renames the log file to File and then recreates a new log file. If a wrap log
exists, File is used as the base name of the renamed files. By default the header
given to open/1 is written first in the newly opened log file, but if argument Head
or BHead is specified, this item is used instead. The header argument is used only
once. Next time a wrap log file is opened, the header given to open/1 is used.
reopen/2,3 are used for internally formatted logs, and breopen/3 for externally
formatted logs.
Owners subscribing to notifications receive a truncate message.
Upon failure to reopen the log, the disk log process terminates with the EXIT
message {{failed,Error},[{disk_log,Fun,Arity}]}. Other processes having requests
queued receive the message {disk_log, Node, {error, disk_log_stopped}}.
sync(Log) -> ok | {error, sync_error_rsn()}
Types:
Log = log()
sync_error_rsn() =
no_such_log | nonode |
{read_only_mode, log()} |
{blocked_log, log()} |
{file_error, file:filename(), file_error()}
Ensures that the contents of the log are written to the disk. This is usually a
rather expensive operation.
truncate(Log) -> ok | {error, trunc_error_rsn()}
truncate(Log, Head) -> ok | {error, trunc_error_rsn()}
btruncate(Log, BHead) -> ok | {error, trunc_error_rsn()}
Types:
Log = log()
Head = term()
BHead = iodata()
trunc_error_rsn() =
no_such_log | nonode |
{read_only_mode, log()} |
{blocked_log, log()} |
{invalid_header, invalid_header()} |
{file_error, file:filename(), file_error()}
Removes all items from a disk log. If argument Head or BHead is specified, this
item is written first in the newly truncated log, otherwise the header given to
open/1 is used. The header argument is used only once. Next time a wrap log file is
opened, the header given to open/1 is used.
truncate/1 is used for both internally and externally formatted logs.
truncate/2 is used for internally formatted logs, and btruncate/2 for externally
formatted logs.
Owners subscribing to notifications receive a truncate message.
If the attempt to truncate the log fails, the disk log process terminates with the
EXIT message {{failed,Reason},[{disk_log,Fun,Arity}]}. Other processes having
requests queued receive the message {disk_log, Node, {error, disk_log_stopped}}.
unblock(Log) -> ok | {error, unblock_error_rsn()}
Types:
Log = log()
unblock_error_rsn() =
no_such_log | nonode |
{not_blocked, log()} |
{not_blocked_by_pid, log()}
Unblocks a log. A log can only be unblocked by the blocking process.
SEE ALSO
file(3erl), wrap_log_reader(3erl)