Provided by: libload-perl_0.24-1_all bug

NAME

       load - control when subroutines will be loaded

SYNOPSIS

         use load;            # default, same as 'autoload'

         use load 'autoload'; # export AUTOLOAD handler to this namespace

         use load 'ondemand'; # load subroutines after __END__ when requested, default

         use load 'now';      # load subroutines after __END__ now

         use load ();         # same as qw(dontscan inherit)

         use load 'dontscan'; # don't scan module until it is really needed

         use load 'inherit';  # do NOT export AUTOLOAD handler to this namespace

VERSION

       This documentation describes version 0.24.

DESCRIPTION

       The "load" pragma allows a module developer to give the application developer more options
       with regards to optimize for memory or CPU usage.  The "load" pragma gives more control on
       the moment when subroutines are loaded and start taking up memory.  This allows the
       application developer to optimize for CPU usage (by loading all of a module at compile
       time and thus reducing the amount of CPU used during the execution of an application).  Or
       allow the application developer to optimize for memory usage, by loading subroutines only
       when they are actually needed, thereby however increasing the amount of CPU needed during
       execution.

       The "load" pragma combines the best of both worlds from AutoLoader and SelfLoader.  And
       adds some more features.

       In a situation where you want to use as little memory as possible, the "load" pragma (in
       the context of a module) is a drop-in replacement for AutoLoader.  But for situations
       where you want to have a module load everything it could ever possibly need (e.g. when
       starting a mod_perl server in pre-fork mode), the "load" pragma can be used (in the
       context of an application) to have all subroutines of a module loaded without having to
       make any change to the source of the module in question.

       So the typical use inside a module is to have:

        package Your::Module;
        use load;

       in the source.  And to place all subroutines that you want to be loadable on demand after
       the (first) __END__.

       If an application developer decides that all subroutines should be loaded at compile time,
       (s)he can say in the application:

        use load 'now';
        use Your::Module;

       This will cause the subroutines of Your::Module to all be loaded at compile time.

MODES OF OPERATION

       There are basically two places where you can call the "load" pragma:

   inside a module
       When you call the "load" pragma inside a module, you're basically enabling that module for
       having an external control when certain subroutines will be loaded.  As with AutoLoader,
       any subroutines that should be loaded on demand, should be located after an __END__ line.

       If no parameters are specified with the "use load", then the "autoload" parameter is
       assumed.  Whether the module's subroutines are loaded at compile time or on demand, is
       determined by the calling application.  If the application doesn't specify anything
       specific, the "ondemand" keyword will also be assumed.

   inside an application
       When you call the "load" pragma inside an application, you're basically specifying when
       subroutines will be loaded by "load" enhanced modules.  As an application developer, you
       can basically use two keywords: "ondemand" and "now".

       If an application does not call the "load" pragma, the "ondemand" keyword will be assumed.
       With "ondemand", subroutines will only be loaded when they are actually executed.  This
       saves memory at the expense of extra CPU the first time the subroutine is called.

       The "now" keyword indicates that all subroutines of all modules that are enhanced with the
       "load" pragma, will be loaded at compile time (thus using more memory, but not having an
       extra CPU overhead the first time the subroutine is executed).

KEYWORDS

       The following keywords are recognized with the "use" command:

   ondemand
       The "ondemand" keyword indicates that subroutines, of modules that are enhanced with the
       "load" pragma, will only be loaded when they are actually called.

       If the "ondemand" keyword is used in the context of an application, all modules that are
       subsequently "use"d, will be forced to load subroutines only when they are actually called
       (unless the module itself forces a specific setting).

       If the "ondemand" keyword is used in the context of a module, it indicates that the
       subroutines of that module, should always be loaded when they are actually needed.  Since
       this takes away the choice from the application developer, the use of the "ondemand"
       keyword in module context is not encouraged.  See also the now and dontscan keywords.

   now
       The "now" keyword indicates that subroutines, of modules that are enhanced with the "load"
       pragma, will be loaded at compile time.

       If the "now" keyword is used in the context of an application, all modules that are
       subsequently "use"d, will be forced to load all subroutines at compile time (unless the
       module forces a specific setting itself).

       If the "now" keyword is used in the context of a module, it indicates that the subroutines
       of that module, should always be loaded at compile time.  Since this takes away the choice
       from the application developer, the use of the "now" keyword in module context is not
       encouraged.  See also the ondemand keyword.

   dontscan
       The "dontscan" keyword only makes sense when used in the context of a module.  Normally,
       when a module that is enhanced with the "load" pragma is compiled, the source after the
       __END__ is scanned for the locations of the subroutines.  This makes the compiling of
       modules a little slower, but allows for a faster (initial) lookup of (yet) unloaded
       subroutines during execution.

       If the "dontscan" keyword is specified, this scanning of the source is skipped at compile
       time.  However, as soon as an attempt is made to ececute a subroutine from this module,
       then first the scanning of the source is performed, before the subroutine in question is
       loaded.

       So, you should use the "dontscan" keyword if you are reasonably sure that you will only
       need subroutines from the module in special cases.  In all other cases it will make more
       sense to have the source scanned at compile time.

       The "dontscan" keyword will be ignored if an application developer forces subroutines to
       be loaded at compile time with the now keyword.

   autoload
       The "autoload" keyword only makes sense when used in the context of a module.  It
       indicates that a generic AUTOLOAD subroutine will be exported to the module's namespace.
       It is selected by default if you use the "load" pragma without parameters in the source of
       a module.  See also the inherit keyword to not export the generic AUTOLOAD subroutine.

   inherit
       The "inherit" keyword only makes sense when used in the context of a module.  It indicates
       that no AUTOLOAD subroutine will be exported to the module's namespace.  This can e.g. be
       used when you need to have your own AUTOLOAD routine.  That AUTOLOAD routine should then
       contain:

        $load::AUTOLOAD = $sub;
        goto &load::AUTOLOAD;

       to access the "load" pragma functionality.  Another case to use the "inherit" keyword
       would be in a sub-class of a module which also is "load" enhanced.  In that case, the
       inheritance will cause the AUTOLOAD subroutine of the base class to be used, thereby
       accessing the "load" pragma automagically (and hence the naming of the keyword of course).
       See also the autoload keyword to have the module use the generic AUTOLOAD subroutine.

   AutoLoader
       The "AutoLoader" keyword enables AutoLoader emulation mode.  It basically takes over the
       functionality of the AutoLoader module (which is part of Perl's core, and which is used by
       many of Perl's core modules).

       Use of AutoLoader emulation mode usually only makes sense in a mod_perl prefork
       environment (in combination with the "now" keyword), or a threaded Perl environment.

       It basically adds the flexibility of subroutine loading options of the "load" pragma to
       the existing codebase of Perl's core and CPAN modules.  It is typically invoked from the
       command line:

        perl -Mload=AutoLoader

       or in a mod_perl configuration:

        <Perl>
        use load qw(AutoLoader now); # as early as possible
                                     # rest of modules to be loaded
        </Perl>

       The AutoLoader emulation mode has the further advantage for modules being developed with
       AutoLoader, as it is possible to run the module before having to have installed the module
       (which is normally a requirement with using AutoLoader).

       Please note that AutoLoader emulation will only work properly for any modules loaded after
       the "load" module is loaded.  It is therefore important to activate the AutoLoader as soon
       as possible, before any other modules have been loaded.  Of particular interest in this
       respect are the threads and the ifdef modules.

REQUIRED MODULES

        (none)

DIFFERENCES WITH SIMILAR MODULES

       There are a number of (core) modules that more or less do the same thing as the "load"
       pragma.

   AutoSplit / AutoLoader
       The "load" pragma is very similar to the AutoSplit / AutoLoader combination.  The main
       difference is that the splitting takes place when the "load" import is called in a module
       and that there are no external files created.  Instead, just the offsets and lengths are
       recorded in a hash (when "ondemand" is active) or all the source after __END__ is eval'led
       (when "now" is active).

       From a module developer point of view, the advantage is that you do not need to install a
       module before you can test it.  From an application developer point of view, you have the
       flexibility of having everything loaded now or later (on demand).

       From a memory usage point of view, the "load" offset/length hash takes up more memory than
       the equivalent AutoLoader setup.  On the other hand, accessing the source of a subroutine
       may generally be faster because the file is more likely to reside in the operating
       system's buffers already.

       As an extra feature, the "load" pragma allows an application to force all subroutines to
       be loaded at compile time, which is not possible with AutoLoader.

       The "AutoLoader emulation" mode causes AutoLoader to be replaced by "load", increasing
       further flexibility in loading options (which can be particularly important in the
       "mod_perl prefork" situation) and ease of use during development of modules using
       AutoLoader (as you don't need to install the module before you can test it).

   SelfLoader
       The "load" pragma also has some functionality in common with the SelfLoader module.  But
       it gives more granularity: with SelfLoader, all subroutines that are not loaded directly,
       will be loaded if any not yet loaded subroutine is requested.  It also adds complexities
       if your module needs to use the <DATA> handle.  So the "load" pragma gives more
       flexibility and fewer development complexities.  And of course, an application can force
       all subroutines to be loaded at compile time when needed with the "load" pragma.

UNIVERSAL::can

       To ensure the functioning of the ->can class method and &UNIVERSAL::can, the "load" pragma
       hijacks the standard UNIVERSAL::can routine so that it can check whether the
       subroutine/method that you want to check for, actually exists and have a code reference to
       it returned.  This has a side effect that you the subroutine checked for, is loaded.  You
       can use this side effect to load subroutines without calling them.

        Your::Module->can( 'loadthisnow' );

       will load the subroutine "loadthisnow" of the Your::Module module without actually calling
       it.

CAVEATS

       Currently you may not have multiple packages in the same file, nor can you have fully
       qualified subroutine names.

       The parser that looks for package names and subroutines, is not very smart.  This is
       intentionally so, as making it smarter will make it a lot slower, but probably still not
       smart enough.  Therefore, the "package" and "sub"'s must be at the start of a line.  And
       the name of the "sub" must be on the same line as the "sub".

EXAMPLES

       Some code examples.  Please note that these are just a part of an actual situation.

   base class
        package Your::Module;
        use load;

       Exports the generic AUTOLOAD subroutine and adheres to whatever the application developer
       specifies as mode of operation.

   sub class
        package Your::Module::Adapted;
        @ISA = qw(Your::Module);
        use load ();

       Does not export the generic AUTOLOAD subroutine, but inherits it from its base class.
       Also implicitely specifies the "dontscan" keyword, causing the source of the module to be
       scanned only when the first not yet loaded subroutine is about to be executed.  If you
       only want to have the "inherit" keyword functionality, then you must specify that
       explicitly:

        package Your::Module::Adapted;
        @ISA = qw(Your::Module);
        use load 'inherit';

   custom AUTOLOAD
        package Your::Module;
        use load 'inherit';

        sub AUTOLOAD {
          if (some condition) {
            $load::AUTOLOAD = $Your::Module::AUTOLOAD;
            goto &load::AUTOLOAD;
          }
          # do your own stuff
        }

       If you want to use your own AUTOLOAD subroutine, but still want to use the functionality
       offered by the "load" pragma, you can use the above construct.

   mod_perl prefork
        use load qw(AutoLoader now);
        use Your::Module;

       In pre-fork mod_perl applications (the default mod_perl applications before mod_perl 2.0),
       it is advantageous to load all possible subroutines when the Apache process is started.
       This is because the operating system will share memory using a process called "Copy On
       Write".  So even though it will take more memory initially, that memory loss is easily
       evened out by the gains of having everything shared.  Loading a not yet loaded subroutine
       in that situation, will cause otherwise shared memory to become unshared.  Thereby
       increasing the overall memory usage, because the amount that becomes unshared is typically
       a lot more than the extra memory used by the subroutine (which is caused by fragmentation
       of allocated memory).

       The AutoLoader emulation mode causes all modules that use "AutoLoader" to be handled by
       "load".  In combination with the "now" mode, this means that many system modules will also
       be loaded completely at server startup (causing a grow in initial use of memory, but
       sharing more memory means that overall memory usage is significantly reduced.

   threaded applications and mod_perl worker
        use Your::Module;

       Threaded Perl applications, of which mod_perl applications using the "worker" module are a
       special case, function best when subroutines are only loaded when they are actually
       needed.  This is caused by the nature of the threading model of Perl, in which all data-
       structures are copied to each thread (essentially forcing them to become unshared as far
       as the operating system is concerned).

       Benchmarks have shown that the overhead of the extra CPU is easily offset by the reduction
       of the amount of data that needs to be copied (and processed) when a thread is created.

       A little additional memory reduction can be achieved with the AutoLoader emulation mode:
       this will prevent the AutoLoader module to be loaded (but have its functionality handled
       by the "load" pragma).

SOURCE FILTERS

       If your module wants to use "load" to load subroutines on demand and that module needs a
       source filter (which is usually activated with a "use" statement), then those modules need
       to be used when the source of the subroutine is compiled.  The class method "register" is
       intended to be used from such a module, typicallly like this:

        sub import {
          my $package = caller();
          load->register( $package,__PACKAGE__ )  # register caller's package
           if defined( $load::VERSION )           # if load.pm loaded
            and $load::VERSION > 0.11;            # and recent enough
        }

       The first parameter is the name of the package in which subroutines need extra modules
       "use"d.  The second parameter is the name of the module that needs to be "use"d.

TODO

       The coordinates of a subroutine in a module (start,number of bytes) are stored in a hash
       in the load namespace.  Ideally, this information should be stored in the stash of the
       module to which they apply.  Then the internals that check for the existence of a
       subroutine, would see that the subroutine doesn't exist (yet), but that there is an offset
       and length (and implicitely, a file from %INC) from which the source could be read and
       evalled.

       Loading all of the subroutines should maybe be handled inside the Perl parser, having it
       skip __END__ when the global "now" flag is set.

       Possibly we should use the <DATA> handle from a module if there is one, or dup it and use
       that, rather than opening the file again.

       Add SelfLoader emulation mode.

MODULE RATING

       If you want to find out how this module is appreciated by other people, please check out
       this module's rating at <http://cpanratings.perl.org/l/load> (if there are any ratings for
       this module).  If you like this module, or otherwise would like to have your opinion
       known, you can add your rating of this module at
       <http://cpanratings.perl.org/rate/?distribution=load>.

ACKNOWLEDGEMENTS

       Frank Tolstrup for helping ironing out all of the Windows related issues.

AUTHOR

       Elizabeth Mattijsen, <liz@dijkmat.nl>.

       Please report bugs to <perlbugs@dijkmat.nl>.

COPYRIGHT

       Copyright (c) 2002, 2003, 2004, 2005, 2006, 2007, 2010, 2012 Elizabeth Mattijsen
       <liz@dijkmat.nl>. All rights reserved.  This program is free software; you can
       redistribute it and/or modify it under the same terms as Perl itself.

SEE ALSO

       AutoLoader, SelfLoader, ifdef, threads.