NAME

       opus_genericctls - Generic CTLs

        - These macros are used with the opus_decoder_ctl and opus_encoder_ctl calls to generate
       a particular request.

SYNOPSIS

   Macros
       #define OPUS_RESET_STATE
           Resets the codec state to be equivalent to a freshly initialized state.
       #define OPUS_GET_FINAL_RANGE(x)
           Gets the final state of the codec's entropy coder.
       #define OPUS_GET_BANDWIDTH(x)
           Gets the encoder's configured bandpass or the decoder's last bandpass.
       #define OPUS_GET_SAMPLE_RATE(x)
           Gets the sampling rate the encoder or decoder was initialized with.
       #define OPUS_SET_PHASE_INVERSION_DISABLED(x)
           If set to 1, disables the use of phase inversion for intensity stereo, improving the
           quality of mono downmixes, but slightly reducing normal stereo quality.
       #define OPUS_GET_PHASE_INVERSION_DISABLED(x)
           Gets the encoder's configured phase inversion status.
       #define OPUS_GET_IN_DTX(x)
           Gets the DTX state of the encoder.

Detailed Description

       These macros are used with the opus_decoder_ctl and opus_encoder_ctl calls to generate a
       particular request.

       When called on an OpusDecoder they apply to that particular decoder instance. When called
       on an OpusEncoder they apply to the corresponding setting on that encoder instance, if
       present.

       Some usage examples:

       int ret;
       opus_int32 pitch;
       ret = opus_decoder_ctl(dec_ctx, OPUS_GET_PITCH(&pitch));
       if (ret == OPUS_OK) return ret;

       opus_encoder_ctl(enc_ctx, OPUS_RESET_STATE);
       opus_decoder_ctl(dec_ctx, OPUS_RESET_STATE);

       opus_int32 enc_bw, dec_bw;
       opus_encoder_ctl(enc_ctx, OPUS_GET_BANDWIDTH(&enc_bw));
       opus_decoder_ctl(dec_ctx, OPUS_GET_BANDWIDTH(&dec_bw));
       if (enc_bw != dec_bw) {
         printf("packet bandwidth mismatch!0);
       }

       See also
           Opus Encoder, opus_decoder_ctl, opus_encoder_ctl, Decoder related CTLs, Encoder
           related CTLs

Macro Definition Documentation

   #define OPUS_GET_BANDWIDTH(x)
       Gets the encoder's configured bandpass or the decoder's last bandpass.

       See also
           OPUS_SET_BANDWIDTH

       Parameters
           x opus_int32 *: Returns one of the following values:

           OPUS_AUTO
               (default)

           OPUS_BANDWIDTH_NARROWBAND
               4 kHz passband

           OPUS_BANDWIDTH_MEDIUMBAND
               6 kHz passband

           OPUS_BANDWIDTH_WIDEBAND
               8 kHz passband

           OPUS_BANDWIDTH_SUPERWIDEBAND
               12 kHz passband

           OPUS_BANDWIDTH_FULLBAND
               20 kHz passband

   #define OPUS_GET_FINAL_RANGE(x)
       Gets the final state of the codec's entropy coder. This is used for testing purposes, The
       encoder and decoder state should be identical after coding a payload (assuming no data
       corruption or software bugs)

       Parameters
           x opus_uint32 *: Entropy coder state

   #define OPUS_GET_IN_DTX(x)
       Gets the DTX state of the encoder. Returns whether the last encoded frame was either a
       comfort noise update during DTX or not encoded because of DTX.

       Parameters
           x opus_int32 *: Returns one of the following values:

           0   The encoder is not in DTX.

           1   The encoder is in DTX.

   #define OPUS_GET_PHASE_INVERSION_DISABLED(x)
       Gets the encoder's configured phase inversion status.

       See also
           OPUS_SET_PHASE_INVERSION_DISABLED

       Parameters
           x opus_int32 *: Returns one of the following values:

           0   Stereo phase inversion enabled (default).

           1   Stereo phase inversion disabled.

   #define OPUS_GET_SAMPLE_RATE(x)
       Gets the sampling rate the encoder or decoder was initialized with. This simply returns
       the Fs value passed to opus_encoder_init() or opus_decoder_init().

       Parameters
           x opus_int32 *: Sampling rate of encoder or decoder.

   #define OPUS_RESET_STATE
       Resets the codec state to be equivalent to a freshly initialized state. This should be
       called when switching streams in order to prevent the back to back decoding from giving
       different results from one at a time decoding.

   #define OPUS_SET_PHASE_INVERSION_DISABLED(x)
       If set to 1, disables the use of phase inversion for intensity stereo, improving the
       quality of mono downmixes, but slightly reducing normal stereo quality. Disabling phase
       inversion in the decoder does not comply with RFC 6716, although it does not cause any
       interoperability issue and is expected to become part of the Opus standard once RFC 6716
       is updated by draft-ietf-codec-opus-update.

       See also
           OPUS_GET_PHASE_INVERSION_DISABLED

       Parameters
           x opus_int32: Allowed values:

           0   Enable phase inversion (default).

           1   Disable phase inversion.

Author

       Generated automatically by Doxygen for Opus from the source code.