NAME

       plscmap1l - Set cmap1 colors using a piece-wise linear relationship

SYNOPSIS

       plscmap1l(itype, npts, intensity, coord1, coord2, coord3, alt_hue_path)

DESCRIPTION

       Set  cmap1 colors using a piece-wise linear relationship between the cmap1 intensity index
       (0.0-1.0) and position in HLS or RGB color space (see the PLplot documentation).   May  be
       called at any time.

       The  idea  here  is  to specify a number of control points that define the mapping between
       input cmap1 intensity indices and HLS or RGB.  Between these points, linear  interpolation
       is  used  which  gives  a  smooth  variation of color with intensity index.  Any number of
       control points may be specified, located at arbitrary positions, although typically 2 -  4
       are  enough. Another way of stating this is that we are traversing a given number of lines
       through HLS or RGB space as we move through cmap1 intensity indices.  The  control  points
       at  the  minimum  and maximum position (0 and 1) must always be specified.  By adding more
       control points you can get more variation.  One good technique for plotting functions that
       vary  about  some  expected average is to use an additional 2 control points in the center
       (position ~= 0.5) that are the same lightness as the background (typically white for paper
       output,  black  for  crt),  and  same hue as the boundary control points.  This allows the
       highs and lows to be very easily distinguished.

       Each control point must specify  the  cmap1  intensity  index  and  the  associated  three
       coordinates in HLS or RGB space.  The first point must correspond to position = 0, and the
       last to position = 1.

       If RGB colors are provided then the interpolation takes place in RGB space and is trivial.
       However if HLS colors are provided then, because of the circular nature of the color wheel
       for the hue coordinate, the interpolation could be performed in  either  direction  around
       the color wheel. The default behaviour is for the hue to be linearly interpolated ignoring
       this circular property of hue. So for example, the hues 0 (red) and 240  (blue)  will  get
       interpolated  via yellow, green and cyan. If instead you wish to interpolate the other way
       around the color wheel you have two options. You may provide hues outside  the  range  [0,
       360), so by using a hue of -120 for blue or 360 for red the interpolation will proceed via
       magenta. Alternatively you can utilise the alt_hue_path variable to reverse the  direction
       of interpolation if you need to provide hues within the [0-360) range.

       Examples  of  interpolation  Huealt_hue_pathcolor  scheme[120 240]falsegreen-cyan-blue[240
       120]falseblue-cyan-green[120  -120]falsegreen-yellow-red-magenta-blue[240   480]falseblue-
       magenta-red-yellow-green[120    240]truegreen-yellow-red-magenta-blue[240    120]trueblue-
       magenta-red-yellow-green

       Bounds on coordinatesRGBR[0,  1]magnitudeRGBG[0,  1]magnitudeRGBB[0,  1]magnitudeHLShue[0,
       360]degreesHLSlightness[0, 1]magnitudeHLSsaturation[0, 1]magnitude

       Redacted form: plscmap1l(itype, intensity, coord1, coord2, coord3, alt_hue_path)

       This function is used in examples 8, 11, 12, 15, 20, and 21.

ARGUMENTS

       itype (PLBOOL(3plplot), input)
              true: RGB, false: HLS.

       npts (PLINT(3plplot), input)
              number of control points

       intensity (PLFLT_VECTOR(3plplot), input)
              A vector containing the cmap1 intensity index (0.0-1.0) in ascending order for each
              control point.

       coord1 (PLFLT_VECTOR(3plplot), input)
              A vector containing the first coordinate (H or R) for each control point.

       coord2 (PLFLT_VECTOR(3plplot), input)
              A vector containing the second coordinate (L or G) for each control point.

       coord3 (PLFLT_VECTOR(3plplot), input)
              A vector containing the third coordinate (S or B) for each control point.

       alt_hue_path (PLBOOL_VECTOR(3plplot), input)
              A vector (with npts - 1 elements), each containing either true to use the  reversed
              HLS  interpolation or false to use the regular HLS interpolation.  (alt_hue_path[i]
              refers to the interpolation interval between the i and i + 1 control points).  This
              parameter is not used for RGB colors (itype = true).

AUTHORS

       Many  developers  (who  are credited at http://plplot.org/credits.php) have contributed to
       PLplot over its long history.

SEE ALSO

       PLplot documentation at http://plplot.org/documentation.php.

                                            June, 2022                         PLSCMAP1L(3plplot)