Provided by: libseccomp-dev_2.5.4-1ubuntu1_amd64 
NAME
seccomp_rule_add, seccomp_rule_add_exact - Add a seccomp filter rule
SYNOPSIS
#include <seccomp.h>
typedef void * scmp_filter_ctx;
int SCMP_SYS(syscall_name);
struct scmp_arg_cmp SCMP_CMP(unsigned int arg,
enum scmp_compare op, ...);
struct scmp_arg_cmp SCMP_A0(enum scmp_compare op, ...);
struct scmp_arg_cmp SCMP_A1(enum scmp_compare op, ...);
struct scmp_arg_cmp SCMP_A2(enum scmp_compare op, ...);
struct scmp_arg_cmp SCMP_A3(enum scmp_compare op, ...);
struct scmp_arg_cmp SCMP_A4(enum scmp_compare op, ...);
struct scmp_arg_cmp SCMP_A5(enum scmp_compare op, ...);
struct scmp_arg_cmp SCMP_CMP64(unsigned int arg,
enum scmp_compare op, ...);
struct scmp_arg_cmp SCMP_A0_64(enum scmp_compare op, ...);
struct scmp_arg_cmp SCMP_A1_64(enum scmp_compare op, ...);
struct scmp_arg_cmp SCMP_A2_64(enum scmp_compare op, ...);
struct scmp_arg_cmp SCMP_A3_64(enum scmp_compare op, ...);
struct scmp_arg_cmp SCMP_A4_64(enum scmp_compare op, ...);
struct scmp_arg_cmp SCMP_A5_64(enum scmp_compare op, ...);
struct scmp_arg_cmp SCMP_CMP32(unsigned int arg,
enum scmp_compare op, ...);
struct scmp_arg_cmp SCMP_A0_32(enum scmp_compare op, ...);
struct scmp_arg_cmp SCMP_A1_32(enum scmp_compare op, ...);
struct scmp_arg_cmp SCMP_A2_32(enum scmp_compare op, ...);
struct scmp_arg_cmp SCMP_A3_32(enum scmp_compare op, ...);
struct scmp_arg_cmp SCMP_A4_32(enum scmp_compare op, ...);
struct scmp_arg_cmp SCMP_A5_32(enum scmp_compare op, ...);
int seccomp_rule_add(scmp_filter_ctx ctx, uint32_t action,
int syscall, unsigned int arg_cnt, ...);
int seccomp_rule_add_exact(scmp_filter_ctx ctx, uint32_t action,
int syscall, unsigned int arg_cnt, ...);
int seccomp_rule_add_array(scmp_filter_ctx ctx,
uint32_t action, int syscall,
unsigned int arg_cnt,
const struct scmp_arg_cmp *arg_array);
int seccomp_rule_add_exact_array(scmp_filter_ctx ctx,
uint32_t action, int syscall,
unsigned int arg_cnt,
const struct scmp_arg_cmp *arg_array);
Link with -lseccomp.
DESCRIPTION
The seccomp_rule_add(), seccomp_rule_add_array(), seccomp_rule_add_exact(), and
seccomp_rule_add_exact_array() functions all add a new filter rule to the current seccomp
filter. The seccomp_rule_add() and seccomp_rule_add_array() functions will make a "best
effort" to add the rule as specified, but may alter the rule slightly due to architecture
specifics (e.g. internal rewriting of multiplexed syscalls, like socket and ipc functions
on x86). The seccomp_rule_add_exact() and seccomp_rule_add_exact_array() functions will
attempt to add the rule exactly as specified so it may behave differently on different
architectures. While it does not guarantee a exact filter ruleset, seccomp_rule_add() and
seccomp_rule_add_array() do guarantee the same behavior regardless of the architecture.
The newly added filter rule does not take effect until the entire filter is loaded into
the kernel using seccomp_load(3). When adding rules to a filter, it is important to
consider the impact of previously loaded filters; see the seccomp_load(3) documentation
for more information.
All of the filter rules supplied by the calling application are combined into a union,
with additional logic to eliminate redundant syscall filters. For example, if a rule is
added which allows a given syscall with a specific set of argument values and later a rule
is added which allows the same syscall regardless the argument values then the first, more
specific rule, is effectively dropped from the filter by the second more generic rule.
The SCMP_CMP(), SCMP_CMP64(), SCMP_A{0-5}(), and SCMP_A{0-5}_64() macros generate a
scmp_arg_cmp structure for use with the above functions. The SCMP_CMP() and SCMP_CMP64()
macros allows the caller to specify an arbitrary argument along with the comparison
operator, 64-bit mask, and 64-bit datum values where the SCMP_A{0-5}() and
SCMP_A{0-5}_64() macros are specific to a certain argument.
The SCMP_CMP32() and SCMP_A{0-5}_32() macros are similar to the variants above, but they
take 32-bit mask and 32-bit datum values.
It is recommended that whenever possible developers avoid using the SCMP_CMP() and
SCMP_A{0-5}() macros and use the variants which are explicitly 32 or 64-bit. This should
help eliminate problems caused by an unwanted sign extension of negative datum values.
If syscall argument comparisons are included in the filter rule, all of the comparisons
must be true for the rule to match.
When adding syscall argument comparisons to the filter it is important to remember that
while it is possible to have multiple comparisons in a single rule, you can only compare
each argument once in a single rule. In other words, you can not have multiple
comparisons of the 3rd syscall argument in a single rule.
In a filter containing multiple architectures, it is an error to add a filter rule for a
syscall that does not exist in all of the filter's architectures.
While it is possible to specify the syscall value directly using the standard __NR_syscall
values, in order to ensure proper operation across multiple architectures it is highly
recommended to use the SCMP_SYS() macro instead. See the EXAMPLES section below. It is
also important to remember that regardless of the architectures present in the filter, the
syscall numbers used in filter rules are interpreted in the context of the native
architecture.
Starting with Linux v4.8, there may be a need to create a rule with a syscall value of -1
to allow tracing programs to skip a syscall invocation; in order to create a rule with a
-1 syscall value it is necessary to first set the SCMP_FLTATR_API_TSKIP attribute. See
seccomp_attr_set(3) for more information.
The filter context ctx is the value returned by the call to seccomp_init(3).
Valid action values are as follows:
SCMP_ACT_KILL
The thread will be killed by the kernel when it calls a syscall that matches the
filter rule.
SCMP_ACT_KILL_PROCESS
The process will be killed by the kernel when it calls a syscall that matches the
filter rule.
SCMP_ACT_TRAP
The thread will throw a SIGSYS signal when it calls a syscall that matches the
filter rule.
SCMP_ACT_ERRNO(uint16_t errno)
The thread will receive a return value of errno when it calls a syscall that
matches the filter rule.
SCMP_ACT_TRACE(uint16_t msg_num)
If the thread is being traced and the tracing process specified the
PTRACE_O_TRACESECCOMP option in the call to ptrace(2), the tracing process will be
notified, via PTRACE_EVENT_SECCOMP , and the value provided in msg_num can be
retrieved using the PTRACE_GETEVENTMSG option.
SCMP_ACT_LOG
The seccomp filter will have no effect on the thread calling the syscall if it
matches the filter rule but the syscall will be logged.
SCMP_ACT_ALLOW
The seccomp filter will have no effect on the thread calling the syscall if it
matches the filter rule.
SCMP_ACT_NOTIFY
A monitoring process will be notified when a process running the seccomp filter
calls a syscall that matches the filter rule. The process that invokes the syscall
waits in the kernel until the monitoring process has responded via
seccomp_notify_respond (3) .
When a filter utilizing SCMP_ACT_NOTIFY is loaded into the kernel, the kernel
generates a notification fd that must be used to communicate between the monitoring
process and the process(es) being filtered. See seccomp_notif_fd (3) for more
information.
Valid comparison op values are as follows:
SCMP_CMP_NE
Matches when the argument value is not equal to the datum value, example:
SCMP_CMP( arg , SCMP_CMP_NE , datum )
SCMP_CMP_LT
Matches when the argument value is less than the datum value, example:
SCMP_CMP( arg , SCMP_CMP_LT , datum )
SCMP_CMP_LE
Matches when the argument value is less than or equal to the datum value, example:
SCMP_CMP( arg , SCMP_CMP_LE , datum )
SCMP_CMP_EQ
Matches when the argument value is equal to the datum value, example:
SCMP_CMP( arg , SCMP_CMP_EQ , datum )
SCMP_CMP_GE
Matches when the argument value is greater than or equal to the datum value,
example:
SCMP_CMP( arg , SCMP_CMP_GE , datum )
SCMP_CMP_GT
Matches when the argument value is greater than the datum value, example:
SCMP_CMP( arg , SCMP_CMP_GT , datum )
SCMP_CMP_MASKED_EQ
Matches when the masked argument value is equal to the masked datum value, example:
SCMP_CMP( arg , SCMP_CMP_MASKED_EQ , mask , datum )
RETURN VALUE
The SCMP_SYS() macro returns a value suitable for use as the syscall value in the
seccomp_rule_add*() functions. In a similar manner, the SCMP_CMP() and SCMP_A*() macros
return values suitable for use as argument comparisons in the seccomp_rule_add() and
seccomp_rule_add_exact() functions.
The seccomp_rule_add(), seccomp_rule_add_array(), seccomp_rule_add_exact(), and
seccomp_rule_add_exact_array() functions return zero on success or one of the following
error codes on failure:
-EDOM Architecture specific failure.
-EEXIST
The rule already exists.
-EACCCES
The rule conflicts with the filter (for example, the rule action equals the default
action of the filter).
-EFAULT
Internal libseccomp failure.
-EINVAL
Invalid input, either the context or architecture token is invalid.
-ENOMEM
The library was unable to allocate enough memory.
-EOPNOTSUPP
The library doesn't support the particular operation.
EXAMPLES
#include <fcntl.h>
#include <seccomp.h>
#include <sys/stat.h>
#include <sys/types.h>
#include <stddef.h>
#define BUF_SIZE 256
int main(int argc, char *argv[])
{
int rc = -1;
scmp_filter_ctx ctx;
struct scmp_arg_cmp arg_cmp[] = { SCMP_A0(SCMP_CMP_EQ, 2) };
int fd;
unsigned char buf[BUF_SIZE];
ctx = seccomp_init(SCMP_ACT_KILL);
if (ctx == NULL)
goto out;
/* ... */
fd = open("file.txt", 0);
/* ... */
rc = seccomp_rule_add(ctx, SCMP_ACT_ALLOW, SCMP_SYS(close), 0);
if (rc < 0)
goto out;
rc = seccomp_rule_add(ctx, SCMP_ACT_ALLOW, SCMP_SYS(exit_group), 0);
if (rc < 0)
goto out;
rc = seccomp_rule_add(ctx, SCMP_ACT_ALLOW, SCMP_SYS(exit), 0);
if (rc < 0)
goto out;
rc = seccomp_rule_add(ctx, SCMP_ACT_ALLOW, SCMP_SYS(read), 3,
SCMP_A0(SCMP_CMP_EQ, fd),
SCMP_A1(SCMP_CMP_EQ, (scmp_datum_t)buf),
SCMP_A2(SCMP_CMP_LE, BUF_SIZE));
if (rc < 0)
goto out;
rc = seccomp_rule_add(ctx, SCMP_ACT_ALLOW, SCMP_SYS(write), 1,
SCMP_CMP(0, SCMP_CMP_EQ, fd));
if (rc < 0)
goto out;
rc = seccomp_rule_add_array(ctx, SCMP_ACT_ALLOW, SCMP_SYS(write), 1,
arg_cmp);
if (rc < 0)
goto out;
rc = seccomp_load(ctx);
if (rc < 0)
goto out;
/* ... */
out:
seccomp_release(ctx);
return -rc;
}
NOTES
While the seccomp filter can be generated independent of the kernel, kernel support is
required to load and enforce the seccomp filter generated by libseccomp.
The libseccomp project site, with more information and the source code repository, can be
found at https://github.com/seccomp/libseccomp. This tool, as well as the libseccomp
library, is currently under development, please report any bugs at the project site or
directly to the author.
BUGS
The runtime behavior of seccomp filters is dependent upon the kernel version, the
processor architecture, and other libraries including libc. This could affect the return
code of a seccomp filter.
* PowerPC glibc will not return a negative number when the getpid() syscall is
invoked. If a seccomp filter has been created where getpid() will return a
negative number from the kernel, then PowerPC glibc will return the absolute value
of the errno. In this case, it is very difficult for an application to distinguish
between the errno and a valid pid.
AUTHOR
Paul Moore <paul@paul-moore.com>
SEE ALSO
seccomp_syscall_resolve_name_rewrite(3), seccomp_syscall_priority(3), seccomp_load(3),
seccomp_attr_set(3)